Coolmax HD-389-U2 User manual

EXTERNALENCLOSURE
Model: HD-389-U2
3.5”
USB2.0 EXTERNAL ENCLOSURE
USER MANNUAL
 System Requirements
zHardware requirement:
a PC, Notebook or Mac system
with free USB interface
zOperation System:
Windows98/Se/Me/XP, Windows 2000,
MACOS8.6 or above
 LED Indicator
zTwin-color:
green indicate power ready;
red indicate HDD working
 Attention
1. Before using, please confirm HDD have been
set as master mode
2. The new HDD should FDISK and FORMAT first.
 Features
1. Suitable for 3.5" IDE HDD
2. Compliant with USB 2.0 standard
3. Data transfer rate up to 480Mbps
4. Sleek aluminum case for efficient
heat dissipation
5. Plug and play
6. Hot swappable
 Installation under Window
Operating System
1. Start Window Operating System
2. Turn on the power switch at the back panel
3. System will automatically detect USB device
( If Window 98/SE System, please visit
http://www.coolmaxusa.com to download
driver accordingly)
4. System will complete installation and an icon
will appear on the right-bottom area of the
status toolbar
 Installation under MAC
Operating System
If your system is Mac OS 9.0 or above, the system
will find the driver directly.
If your system is 8.6,you have to download and
setup “USB MASS STORAGE SUPPORT 1.3.5”
from SOFTWARE SUPPORT
URL:http://www.apple.com/support
 Package Contents
Before using this device, please check the package
compliance with below. If any of these items are
missing or damaged, please contact the local
dealers immediately.
zUSB2.0 External Enclosure
zUSB2.0 Connecting Cable
zUser Manual
zPower Adapter