HP StorageWorks EVA8000 Installation instructions

Product End-of-Life Disassembly Instructions
Product Category: Storage Enclosures
Marketing Name / Model
[List multiple models if applicable.]
Name / Model #1 HP StorageWorks EVA8000, EVA8100, 70-41138-01, 70-41138-11
Name / Model #2 HP StorageWorks EVA4000, EVA6000, EVA4100, EVA6100, 70-41138-02, 70-41138-12
Name / Model #3
Name / Model #4
Name / Model #5
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
With a surface greater than 10 sq cm Model #1 -
18
Model #2 -
16 *
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries All types including standard alkaline and lithium coin
or button style batteries
Model #1 -
12
Model #2 -
6
Mercury-containing components For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps 0
0
Cathode Ray Tubes (CRT) 0
Capacitors / condensers (Containing PCB/PCT) 0
Model #1 -
Model #2 -
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords 0
Gas Discharge Lamps 0
Plastics containing Brominated Flame Retardants 0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos 0
EL-MF877-00 Page 1
Template Revision A

Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description Tool Size (if
applicable)
Description #1 Philips Screwdriver 2
Description #2 Pry Tool
Description #3 ?
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.
2.
3.
4.
5.
6.
7.
8.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
* Printed Circuit Boards no longer require selective treatment. Can be disposed with the remainder of the assembly.
EL-MF877-00 Page 2
Template Revision A
Controller front view.
Battery Assemblies shown
on left. Battery latch
indicated by arrow.
Remove Batter
y(
s
)
.

Controller rear view.
Power Supply Assemblies
on right. Purple Power
Supply latch indicated by
arrow.
Remove Power Supplies.
Controller top view.
Cover latch shown
disengaged for removal.
Remove cover by lifting
edge of cover slightly and
pull away from mating
cover section prior to
lifting off of enclosure..
Capacitor (10 places). Remove
using pry tool.
EL-MF877-00 Page 3
Template Revision A

Capacitor (6 places). Remove
using pry tool.
Power Supply disassembly –
remove 6 case screws and lift
top cover .
Capacitor (2 places). Remove
using pry tool.
Battery disassembly – insert
small flat blade screwdriver to
remove catches ( 3 places), and
lift top cover .
Battery (6 places). Lift
assembly from case and remove
from PCB using pry tool.
EL-MF877-00 Page 4
Template Revision A