Rosewill PRISM M User manual

1
PRODUCT OVERVIEW
Disassembly Chart (components vary by country)
Thank you for purchasing a Rosewill Case.
Please read the instruction manual before use and retain for future reference.
PRISM M
Dimensions: 208 x 455 x 390 mm (W x H x D)
455 mm
208 mm390 mm
Panel L
Panel R
Front Panel
SSD
Cage
HDD
Cage
120 mm RGB
Double Ring Fan
120 mm Black Fan
Top Dust Filter

2
Accessory Kit
x1 x5
Speaker Cable Tie
Motherboard Cable
Management
x1
Nut Setter
Standoff
Installation
x8
Screw-C
(6-32 x 8 mm)
3.5" HDD
x6
Screw-A
(6-32 x 6 mm)
x17
Screw-B
(M3 x 5 mm)
6+3
Standoff
Motherboard
(6 pre-Installed)
INSTALLATION GUIDE
1. Open the Unit
1-1. Pull to open Panel R. Remove the thumb screws and take off Panel L (Figure 1).
Motherboard
2.5" HDD/SSD
PSU
Add-on Card
1

3
2. Install Power Supply
2-1. Set the power supply unit (PSU) at the bottom-rear of the case and secure with Screw-A
(Figure 2).
3. Install Motherboard
3-1. Secure the motherboard onto the pre-installed standoffs with Screw-B (Figure 3).
2
3

4
4. Install Add-on Card
4-1. Bend to remove the slot covers, then install the add-on card and secure with Screw-A
(Figure 4).
5. Install 3.5”/2.5” HDD/SSD
5-1. Remove the thumb screws on the bottom of chassis to take out the HDD cage (Figure 5a).
4
5a

5
5-2. Install HDD/SSD onto the trays and secure with Screw-B or C (Figure 5b). Insert the trays
back into drive cage and secure with thumb screws (Figure 5c).
5-3. Alternatively, you can also install 2.5” SSD on the right side of chassis (Figure 5d).
OR
6. Care
To prevent damage, keep all panels closed and secured.
6-1. Put the side panels back in place and secure with thumb screws.
6-2. Clean the dust lters on top/bottom regularly to ensure adequate airow.
5b
5c
5d

6
7. Options
7-1. Additional Fan Installation
The PRISM M features ample space for additional cooling fans. Please refer to the
Specications Table for options.
7-2. LED Light Mode
Press the LED light button briey to select desired mode:
Rainbow Red Green Blue Purple Cyan Lime White RGB-1 (seven-
color-breathing) RGB-2 (seven-color-blinking) Off
7-1. Liquid Cooling Radiator Installation
The PRISM M supports the option of installing a 240 mm radiator in the front (Figure 7a)
and a 240 mm radiator on the top (Figure 7b) to more effectively cool high-performance
systems.
7a
7b

7
USB 3.0 CONNECTOR USB 2.0 CONNECTOR HD Audio CONNECTOR
TOP I/O CABLE PINOUT
TOP I/O
Power Reset Audio Out
LED Mode Audio In
USB 3.0 USB 2.0

Technical Support Information [email protected] 1-800-575-9885
Please register your product at www.rosewill.com for complete warranty information and support for your product. PRISM M_B
Model
Model Name PRISM M
Specifications
Type Mid Tower
Color Black
Case Material Steel/Plastic/Tempered Glass
With Power Supply No
Power Supply Mounted Bottom
Motherboard Compatibility E-ATX, ATX, Micro ATX
With Side Panel Window Yes/Tempered Glass Side Window
Expansion
Internal 3.5" Drive Bays 2/1
Internal 2.5" Drive Bays 2/3
Expansion Slots 7
I/O
Top Ports
2 x USB 3.0
2 x USB 2.0
Audio In/Out
LED Modes
Cooling System
120 mm Fans
3 x Front (1 x Black Fan pre-installed)
2 x Top (optional)
1 x Rear (1 x RGB Double Ring Fan pre-installed)
140 mm Fans
2 x Front (optional)
2 x Top (optional)
1 x Rear (optional)
Physical Specifications
Dimensions 8.19 x 17.91 x 15.35 in (W x H x D)
Weight 12.13 lbs
SPECIFICATIONS TABLE