Cooper Lighting Solutions HIWSKB1BLE40AWH User manual

Installation Instructions For Scene Keypad Battery Powered HIWSKB1BLE40A
Instructions d’installation pour clavier à scénarios alimenté par pile HIWSKB1BLE40A
Instrucciones de instalación para teclado de escena alimentado por batería HIWSKB1BLE40A
INS #
IL517021EN
A. Determine a wall area that is convenient. Follow all local
applicable codes for wall height.
B. Confirm that there are no studs or other in-wall obstructions.
C. Measure and cutout area for low voltage wall box or bracket
(sold separately).
D. Install wall box/bracket as per chosen product's instructions.
Press the 1 button 4 times, then the power button 4 times, then
the 1 button 4 times. The LED indicator will stay on for 5 seconds
then blink for 30 seconds on a successful reset.
Appuyez 4 fois sur le bouton1 puis 4 fois sur le bouton de
mise en marche puis 4 fois sur le bouton1. Le témoin DEL
restera allumé pendant 5 secondes puis clignotera pendant
30 secondes pour indiquer la réussite de la restauration.
Presione 4 veces el botón 1, luego 4 veces el botón de
encendido, luego 4 veces el botón 1. El indicador LED
permanecerá durante 5 segundos y luego parpadeará
durante 30 segundos en un reinicio exitoso.
E. Install battery... Mount HALO Home Scene Keypad using the
A. Determinar un área de pared que sea conveniente. Siga todos
los códigos locales aplicables para la altura de la pared.
B. Confirme que no haya montantes u otras obstrucciones en la
pared.
C. Área de medida y recorte para caja o soporte de pared de bajo
voltaje (se vende por separado).
D. Instale la caja de pared / soporte según las instrucciones.
E. Instale las baterías ...Monte el teclado HALO Home Scene
A. Déterminez le mur de la pièce le plus pratique. Suivez les
règlements locaux de hauteur murale en vigueur de votre région.
B. Confirmez l’absence de tout montant et l’obstruction sous le mur.
C. Mesurez et découpez l’emplacement pour la boite murale basse
tension ou le support (vendu séparément).
D. Installez la boite murale ou le support comme indiqué aux
instructions.
E. Installez les piles… Montez le clavier de scénarios d’éclairage
In-Wall Anywhere Mount
Battery Installation
Factory Reset
Montage mural universel
Installation de la pile
Restauration aux paramètres d’usine
Montaje en pared en cualquier lugar
Instalación de la batería
Restablecimiento de fábrica
ONLY USE WITH HALO HOME LIGHTING FIXTURES, CONTROLS AND ACCESSORIES.
À UTILISER SEULEMENT AVEC LES LUMINAIRES, COMMANDES ET ACCESSOIRES HALO HOME.
UTILICE ÚNICAMENTE CON LAS LUMINARIAS HALO HOME, CONTROLESY ACCESORIOS.
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
The battery (battery or batteries or battery
pack) shall not be exposed to excessive
heat such as sunshine, fire or the like.
Chemical Burn Hazard. Keep batteries away
from children.
•This product contains a lithium battery. If a new
or used lithium cell battery is swallowed or enters
the body, it can cause severe internal burns and
can lead to death in as little as 2 hours. Always
completely secure the battery compartment. If the
battery compartment does not close securely, stop
using the product, remove the batteries, and keep
it away from children. If you think batteries might
have been swallowed or placed inside any part of
the body, seek immediate medical attention.
•The cells shall be disposed of properly, including
keeping them away from children.
•Even used cells may cause injury.
Peligro de explosión si la batería es
incorrectamente remplazada. reemplace
únicamente con la misma o tipo equivalente.
La batería (batería o baterías o paquete de
baterías) no deberá ser expuesta a calor
excesivo como luz del sol, fuego o algo
parecido.
Peligro de quemadura química. Mantenga
las baterías alejadas de los niños.
•Este producto contiene una pila de botón de litio /
moneda. Si una batería nueva o usada pila de botón
/ botón de litio se ingiere o entra en el cuerpo,
puede causar quemaduras internas graves y puede
conducir a la muerte en tan sólo 2 horas. Siempre
asegure por completo el compartimiento de la
batería. Si el compartimiento de la batería no se
cierra de forma segura, deje de usar el producto,
retire las pilas, y mantenerlo alejado de los niños.
Si cree que las baterías pueden haberse tragado
o colocado dentro de cualquier parte del cuerpo,
busque atención médica inmediata.
•Las baterías deben eliminarse de manera adecuada,
incluyendo mantenerlos alejados de los niños.
•Incluso las baterías usadas pueden causar lesiones.
Risque d’explosion si la pile n’est pas
remplacée correctement. Remplacez-la par
une pile identique ou équivalente.
La pile (pile ou piles ou bloc-piles) ne doit
pas être exposée à une chaleur intense
comme les rayons du soleil, un feu ou
source semblable.
Risque de brûlures chimiques. Gardez les
piles éloignées des enfants.
•Ce produit renferme une pile au lithium. Si une
pile fraîche ou usagée au lithium est avalée ou
est ingérée par le corse, elle peut provoquer des
brûlures internes graves et causer la mort en
aussi peu que 2 heures. Assurez-vous de toujours
fixer fermement la pile dans son logement. Si le
logement de la pile ne se ferme pas solidement,
cessez d’utiliser le produit, retirez les piles et
gardez hors de la portée des enfants. Si vous
croyez que les piles ont peut-être été ingérées
ou insérez dans une partie quelconque du corps,
consultez immédiatement un médecin.
•Les piles doivent être jetées correctement y compris
les garder hors de la portée des enfants.
•Même les piles usagées peuvent causer des
blessures.
CHOKING HAZARD
Small parts. Not for children under 3 years.
RISQUE D’ÉTOUFFEMENT
Petites pièces Non dédié aux enfants de moins 3 ans.
PELIGRO DE ASFIXIA
Piezas pequeñas. No apto para niños menores de 3 años.
Top / Dessus / Parte Superior
1
2
Top / Dessus / Parte Superior
1
2
Top / Dessus / Parte Superior
1
2
WARNING AVERTISSEMENT ADVERTENCIA
Lighting Solutions
utilizando los tornillos provistos en la caja/soporte de pared...
(se vende por separado) ... luego consulte la instalación de
emparejamiento de HH en www.cooperlighting.com
HALO Home en utilisant les vis fournies dans la boite murale ou
sur le support… plaque (vendue séparément)… puis consultez
les instructions de jumelage de l’application HALO Home en
allant sur : www.cooperlighting.com
provided screws into the wall box/bracket...faceplate (sold sep
arately)...then refer to the HALO Home app pairing instructions
at www.cooperlighting.com

Cooper Lighting Solutions
1121 Highway 74 South
Peachtree City, GA 30269
P:770-486-4800
Cooper Lighting Solutions es
una marca comercial
registrada.Todas las marcas
comerciales son propiedad de
sus respectivos propietarios.
Cooper Lighting Solutions est
une marque de commerce
déposée.Toutes les autres
marques de commerce sont la
propriété de leur propriétaire
respectif.
Cooper Lighting Solutions is
a registered trademark. All
trademarks are property of
their respective owners.
FCC
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules.These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.This equipment generates, uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
This device complies with FCC radiation exposure limits
set forth for an uncontrolled environment.This equipment
must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter
must be installed to provide a separation distance of at least
20 cm from all persons.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION!
Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
Bluetooth
The Bluetooth®word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Cooper Lighting Solutions is under license.
Other trademarks and trade names are those of their
respective owners.
Industry Canada
This device complies with Industry Canada’s licence-exempt
RSSs. Operation is subject to the following two conditions:
(1)This device may not cause interference; and
(2)This device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d’Industrie
Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
The device meets the exemption from the routine
evaluation limits in section 2.5 of RSS 102 and compliance
with RSS-102 RF exposure, users can obtain Canadian
information on RF exposure and compliance.
Le dispositif rencontre l’exemption des limites courantes
d’évaluation dans la section 2.5 de RSS 102 et la conformité
à l’exposition de RSS-102 rf, utilisateurs peut obtenir
l’information canadienne sur l’exposition et la conformité
de rf.
This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator
and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant
en même temps qu’aucune autre antenne ou émetteur.
Cet équipement devrait être installé et actionné avec une
distance minimum de 20 centimètres entre le radiateur et
votre corps.
5-Year Limited Warranty
THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN
LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS,
IMPLIED OR STATUTORY INCLUDING, BUT NOT LIMITED
TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS
FOR ANY PARTICULAR PURPOSE.
Cooper Lighting Solutions warrants to customers that, for
a period of five years from the date of purchase, Cooper
Lighting Solutions products will be free from defects in
materials and workmanship.The obligation of Cooper
Lighting Solutions under this warranty is expressly limited
to the provision of replacement products.This warranty
is extended only to the original purchaser of the product.
A purchaser’s receipt or other proof of date of original
purchase acceptable to Cooper Lighting Solutions.This is
required before warranty performance shall be rendered.
This warranty does not apply to Cooper Lighting Solutions
products that have been altered or repaired that have
been subjected to neglect, abuse, misuse or accident
(including shipping damages).This warranty does not
apply to products not manufactured by Cooper Lighting
Solutions which have been supplied, installed, and/or used
in conjunction with Cooper Lighting Solutions products.
Damage to the product caused by replacement bulbs or
corrosion or discoloration of brass components are not
covered by this warranty.
FCC
Se ha probado este equipo y se ha determinado que cumple
con los límites de un dispositivo digital Clase B, conforme
a la Sección 15 de las normas de la FCC. Estos límites están
diseñados para proporcionar una protección razonable
contra las interferencias dañinas en una instalación
residencial. Este equipo genera, usa y puede irradiar
energía de radiofrecuencia y, si no se instala y usa de
acuerdo con las instrucciones puede causar interferencias
dañinas en las comunicaciones de radio. No obstante, no
hay garantía de que no se produzcan interferencias en una
instalación particular. Si este equipo causa interferencias
dañinas en la recepción de radio o televisión, lo cual se
puede comprobar si se enciende y apaga el equipo, se
recomienda al usuario que intente corregir la interferencia
mediante una o más de las siguientes medidas:
- Reorientar o reubicar la antena receptora.
- Aumentar la separación entre el equipo y el receptor.
- Conecte el equipo al tomacorriente de un circuito distinto
de aquel al que está conectado el receptor.
- Consulte al distribuidor o a un técnico de radio/televisión
cualificado para obtener ayuda.
Este equipo cumple con los límites de exposición a la
radiación de la FCC establecidos para un entorno no
controlado. Este equipo debe instalarse y operarse de
acuerdo con las instrucciones proporcionadas y la(s)
antena(s) utilizada(s) para este transmisor deben instalarse
para proporcionar una distancia de separación de al menos
20 cm de todas las personas.
Este dispositivo cumple con la Sección 15 de las Reglas
de la Comisión Federal de Comunicaciones (FCC).
Su funcionamiento está sujeto a las siguientes dos
condiciones:
(1) este dispositivo puede no provocar interferencias
perjudiciales, y
(2) este dispositivo debe aceptar las interferencias
recibidas, incluida la interferencia que puede provocar un
funcionamiento no deseado.
¡PRECAUCIÓN!
Cualquier cambio o modificación no aprobada
expresamente por la parte responsable del cumplimiento
puede anular la autoridad del usuario para operar el equipo.
Bluetooth
La palabra y los logotipos de Bluetooth® son marcas
registradas propiedad de Bluetooth SIG, Inc. y cualquier uso
de tales marcas por parte de Cooper Lighting Solutions se
realiza bajo licencia. Otras marcas comerciales y nombres
comerciales son los de sus respectivos dueños.
Industria Canadá
Este dispositivo cumple con los estándares RSS exentos de
licencia de Industry Canada. Su funcionamiento está sujeto
a las siguientes dos condiciones:
(1) este dispositivo puede no provocar interferencias
perjudiciales; y
(2) este dispositivo debe aceptar las interferencias
recibidas, incluida la interferencia que puede provocar un
funcionamiento no deseado.
El dispositivo cumple con la exención de los límites de
• Name, address and telephone number
• Date and place of purchase
• Catalog and quantity purchase
• Detailed description of problem
All returned products must be accompanied by a Return
Goods Authorization Number issued by the Company and
must be returned freight prepaid. Any product received
without a Return Goods Authorization Number from the
Company will be refused. Cooper Lighting Solutions is not
responsible for merchandise damaged in transit. Repaired
or replaced products shall be subject to the terms of
this warranty and are inspected when packed. Evident
or concealed damage that is made in transit should be
reported at once to the carrier making the delivery and
a claim filed with them. Reproductions of this document
without prior written approval of Cooper Lighting Solutions
are strictly prohibited.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONSTOTHIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOIDTHE USER’S
AUTHORITYTO OPERATETHE EQUIPMENT.
INS #
IL517021EN
evaluación de rutina en la sección 2.5 de RSS 102 y el
cumplimiento con la exposición a RF RSS-102; los usuarios
pueden obtener información canadiense sobre la exposición
y el cumplimiento de RF.
Este transmisor no debe ubicarse ni funcionar
conjuntamente con ninguna otra antena o transmisor. Este
equipo debe instalarse y operarse con una distancia mínima
de 20 cm entre el radiador y su cuerpo.
Garantía limitada de 5 años
LA SIGUIENTE GARANTÍA ES EXCLUSIVA Y REEMPLAZA
A CUALQUIER OTRA GARANTÍA,YA SEA EXPRESA,
IMPLÍCITA O ESTABLECIDA POR LA LEY, INCLUIDA, ENTRE
OTRAS, CUALQUIER GARANTÍA DE COMERCIALIZACIÓN O
ADAPTACIÓN PARA UN OBJETIVO EN PARTICULAR.
Cooper Lighting Solutions garantiza a los clientes que,
durante un período de cinco años a partir de la fecha
de compra, los productos de Cooper Lighting Solutions
estarán libres de defectos en materiales y mano de obra.
La obligación de Cooper Lighting Solutions bajo esta
garantía queda expresamente limitada a la provisión de los
productos de repuesto. Esta garantía se extiende solo al
comprador original del producto. Un recibo del comprador
u otra prueba de la fecha de la compra original aceptable
para Cooper Lighting Solutions. Esto es necesario antes
de dar cuenta de un mal rendimiento bajo garantía. Esta
garantía no se aplica a los productos de Cooper Lighting
Solutions que se hayan modificado o reparado o que se
hayan sometido a negligencia, abuso, mal uso o accidentes
(incluidos los daños en el envío). Esta garantía no se aplica
a productos no fabricados por Cooper Lighting Solutions
que se hayan suministrado, instalado y/o utilizado en
conjunto con los productos de Cooper Lighting Solutions.
Esta garantía no cubre los daños al producto provocados
por el reemplazo de bombillas, corrosión o decoloración de
los componentes de bronce.
• Nombre, dirección y número de teléfono
• Fecha y lugar de la compra
• Catálogo y cantidad comprada
• Descripción detallada del problema
Todos los productos devueltos deben estar acompañados
por el Número de autorización de bienes devueltos
emitido por la compañía y debe pagarse el transporte por
anticipado. Cualquier producto recibido sin un Número
de autorización de bienes devueltos de la compañía será
rechazado. Cooper Lighting Solutions no es responsable
de los daños en la mercadería durante el transporte. Los
productos reparados o reemplazados quedan sujetos a
los términos de esta garantía y se inspeccionan cuando se
embalan. Los daños evidentes u ocultos ocurridos durante
el transporte deben informarse de inmediato a la empresa
transportista que realiza la entrega, y debe completarse un
reclamo. Las reproducciones de este documento sin previa
aprobación por escrito de Cooper Lighting Solutions están
estrictamente prohibidas.
Cambios o modificaciones no expresamente aprobados por
la parte responsable por conformidad puede invalidar la
autoridad del usuario para operar el equipo.
NOTA: EL FABRICANTE NO ES RESPONSABLE POR
CUALQUIER INTERFERENCIA DE RADIO OTV CAUSADO
POR MODIFICACIONES NO AUTORIZADAS HACIA EL
EQUIPO, DICHAS MODIFICACIONES PUEDE INVALIDAR LA
AUTORIDAD DEL USUARIO PARA OPERAR EL EQUIPO.
© 2020 Cooper Lighting Solutions
All Rights Reserved
Printed in China
Imprimé aux Chine
Impreso en los China
Publication No. IB517021EN
March 11 2020
LIMITATION OF LIABILITY:
IN NO EVENT SHALL COOPER LIGHTING SOLUTIONS
BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES (REGARDLESS OFTHE FORM
OF ACTION, WHETHER IN CONTRACT, STRICT LIABILITY, OR
INTORT INCLUDING NEGLIGENCE), NOR FOR LOST
PROFITS; NOR SHALLTHE LIABILITY OF COOPER LIGHTING
SOLUTIONS FOR ANY CLAIMS OR DAMAGE ARISING
OUT OF OR CONNECTED WITHTHESETERMS OR THE
MANUFACTURE, SALE, DELIVERY, USE, MAINTENANCE,
REPAIR OR MODIFICATION OF COOPER LIGHTING
SOLUTIONS PRODUCTS, OR SUPPLY OF ANY
REPLACEMENT PARTS THEREFORE, EXCEEDTHE
PURCHASE PRICE OF COOPER LIGHTING SOLUTIONS
PRODUCTS GIVING RISETO A CLAIM. NO LABOR
CHARGES WILL BE ACCEPTEDTO REMOVE OR INSTALL
FIXTURES.
To obtain warranty service, please contact Cooper Lighting
Solutions, at 1-800-334-6871, press option 2 for Customer
Service, or via e-mail
ConsumerProducts@cooperlighting.com and include the
following information:
LIMITACIÓN DE RESPONSABILIDAD:
BAJO NINGUNA CIRCUNSTANCIA COOPER LIGHTING
SOLUTIONS SERÁ RESPONSABLE POR DAÑOS
ESPECIALES, INDIRECTOS, INCIDENTALES O
ACCIDENTALES (INDEPENDIENTEMENTE DE LA FORMA DE
ACCIÓN,YA SEA EN CONTRATO, RESPONSABILIDAD
ESTRICTA O EXTRACONTRACTUAL, INCLUIDA LA
NEGLIGENCIA), NI POR LAS PÉRDIDAS DE GANANCIAS;
TAMPOCO COOPER LIGHTING SOLUTIONS SERÁ
RESPONSABLE POR CUALQUIER RECLAMO O DAÑO QUE
SURJA EN RELACIÓN A ESTOS TÉRMINOS O CON LA
FABRICACIÓN, VENTA, ENTREGA, USO, MANTENIMIENTO,
REPARACIÓN O MODIFICACIÓN DE LOS PRODUCTOS, NI
CON EL SUMINISTRO DE CUALQUIER PIEZA DE REPUESTO
QUE EXCEDA EL PRECIO DE COMPRA DEL PRODUCTO. NO
SE ACEPTARÁN CARGOS POR MANO DE OBRA PARA
RETIRAR O INSTALAR LOS ACCESORIOS.
Para obtener servicio de garantía, comuníquese con Cooper
Lighting Solutions, al 1-800-334-6871, presione la opción 2
para Servicio al cliente, o por correo electrónico a
ConsumerProducts@cooperlighting.com e incluya la
siguiente información:
www.cooperlighting.com
Popular Keypad manuals by other brands

Elk Products
Elk Products Keypad Arming Station ELK-M1KPAS Operation guide

Cooper
Cooper Scantronic 524 installation guide

Crestron
Crestron AirMedia ZUMMESH-KP10AMBATT quick start guide

SOMFY
SOMFY CLAVIER TOUCHE FILAIRE installation guide

Samsung
Samsung OfficeServ ITP-5121D Quick reference guide

GE
GE NetworX NX-1500E user manual