Cooper Lighting Corelite ADE080932 User manual

Installation Instructions
Warning
: Before starting any work ensure that
all sources of power are turned off. All work must
meet local/national codes and be performed by a
certified electrician. Do not mount fixtures
vertically.
Sheet 1 of 4
R1 Ultra Shallow Recessed
Concealed Ceiling Installation Instructions
1' x 4', 2' x 2', 2' x 4'
Sheet
rock
Ceiling bracing
(by others)
Metalux DF Series
Frame kit
Corelite Ultra-shallow
recessed fixture
(R1 1' x 4' fixture shown)
Exploded View and Part call-out
Cut-out Dimensions
on Page 2
???????????
?????????
1x4 assembly shown.
2x4 and 2x2 assemble
in same manner.
Corner bracket
(x4)
4ft. section
1ft. section
1. To assemble Metalux DF series frame kit, firmly insert corner bracket into one side of long sectio n.
Ensure corner bracket it facing the inside to the extrusion sections as shown in detail A. Corne r bracket
will lock into place when fully positioned.
2. Firmly insert short section to other side of co rner bracket. Repeat until ceiling bracket is full y assembled.
Assembling the Metalux
TM
DF Series Frame Kit
?
Fixture Size
1x4
2x2
2x4
Frame Kit Part #
DF-24W-U
DF-22W-U
DF-14W-U
Cooper Lighting
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Corelite
4675 Holly St
Denver, CO 80216
P: 303-393-1522
www.corelite.com
ADE080932 REV(A)

Bracing
(by others)
Sheet rock
Metalux DF series
frame kit
Screw
(by others)
Installation Instructions
Warning
: Before starting any work ensure that
all sources of power are turned off. All work must
meet local/national codes and be performed by a
certified electrician. Do not mount fixtures
vertically.
Sheet 2 of 4
R1 Ultra Shallow Recessed
Concealed Ceiling Installation Instructions
1' x 4', 2' x 2', 2' x 4'
Ceiling
Appropriate fasteners
(x6)
Section view
Hole Cut-out dimensions
Cut-outs dimensions are exact. In order to maintai n the precision fit of the Metalux DF series frame kit,
bracing in ceiling must precisely match above dimensions. Shims may be used to maintain t olerances.
1' x 4'
2' x 2'
2' x 4'
1. After appropriate cut-out is made in sheet rock , insert Metalux DF series frame kit into cut-out a nd
secure bracket to bracing using appropriate fa steners(by others). Use shims to prevent the brack et
joints from opening.
Securing Metalux DF Series Frame Kit to Structure i n Ceiling
31/8"
16 "-0"
24 +
1/8"+
48 0"- "
4
1
1/8"+
12 0"- "
16
3
1/8"+
24 0"- "
16
3
1/8"+
24 0"- "
4
148 1
4"-0"
+1/8"
Cooper Lighting
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Corelite
4675 Holly St
Denver, CO 80216
P: 303-393-1522
www.corelite.com
ADE080932 REV(A)

Installation Instructions
Warning
: Before starting any work ensure that
all sources of power are turned off. All work must
meet local/national codes and be performed by a
certified electrician. Do not mount fixtures
vertically.
Sheet 3 of 4
R1 Ultra Shallow Recessed
Concealed Ceiling Installation Instructions
1' x 4', 2' x 2', 2' x 4'
Bracing
Sheet rock
Acrylic
insert
Fixture
assembly
Installing the Pre-wired Fixture
1. After wiring fixture and checking all connectio ns, carefully rotate fixture and lift into into Met alux DF
series frame kit. Pre-installed acrylic inser ts will rest on inside edge of Metalux DF series fr ame kit.
Side View
Ground screw
Conduit
(by others *)
Electrical cover plate
Conduit from
power source
(by others *)
Corelite R1
Ultra Shallow Fixture
Metalux DF series
Frame Kit
1. Unless top access is available, fixture must be wired prior to installing fixture into Metalux DF series
frame kit
2. Remove electrical cover plate from fixture and attach conduit(*supplied by others unless pre-ordered with
6' or 12' whip) to cover plate.
3. Loosen ground screw and secure ground wire to cover plate. Attach appropriate wires ensuring all
connections are properly matched.
4. Secure cover plate to fixture.
Wiring the Fixture
Cooper Lighting
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Corelite
4675 Holly St
Denver, CO 80216
P: 303-393-1522
www.corelite.com
ADE080932 REV(A)

Lens
Lamps
Ceiling removed
for clarity
Installing Lamps into Fixture
Metalux DF series
frame kit
Installation Instructions
Warning
: Before starting any work ensure that
all sources of power are turned off. All work must
meet local/national codes and be performed by a
certified electrician. Do not mount fixtures
vertically.
Sheet 4 of 4
R1 Ultra Shallow Recessed
Concealed Ceiling Installation Instructions
1' x 4', 2' x 2', 2' x 4'
1. Gently remove lens from fixture and store in a sa fe place.
2. Slide lamp contacts into sockets at both ends of fixture and rotate lamp to secure in socket.
3. Snap lens back into place around plastic end caps .
Slide lamp into socket
and rotate
Cooper Lighting
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Corelite
4675 Holly St
Denver, CO 80216
P: 303-393-1522
www.corelite.com
ADE080932 REV(A)