FAIL-SAFE®
ARCHITECTURAL VANDAL RESISTANT
COOPER LIGHTING
DIMENSIONS
DESCRIPTION
The Fail-Safe VR 2000 15” Round Semi-
Recessed Series combines strength-
gaining architecture with energy-saving
technology. Architecturally angled facets
blend with its circular form to actually
increase the ability of the lens to deflect
blows and absorb impact. Extra thick
injection molded polycarbonate lens
incorporates an optical design that
obscures the lamp image and spreads
light evenly. Recessed housing may be
ordered separately for early installation
Perimeter paint is available in 4 standard
colors. Choose VariColor™ to customize
your product with your corporation or
school colors. U.L. listed and C.S.A.
certified for wet locations.
VR Products carry a Lifetime Warranty.
For full information, see warranty
statement at the beginning of this
section.
•AccUView coating for the
one piece injection molded
polycarbonate lens.
AccUView is a UV inhibitor
coating inside and out to
lengthen lens life.
Minimum .130" thick with
internal blondels
• Four stainless steel TORX®
screws with center reject
pin. Screw heads are
recessed
• 16 ga. CRS housing with
white polyester powder
coat finish
• Housing is die cast
aluminum. Requires four
1/4" diam. fasteners
• Porcelain medium base
socket with nickel-plated
brass screw shell and
shock absorbing socket
bracket
• Gasketing is die cut closed
cell and seals lens and
housing
• Copper wound NPF or HPF
ballast available. Consult
ordering information.
VC
VW
15" ROUND
SEMI-RECESSED
35W-100W
High Pressure Sodium
50W-100W
Metal Halide
POLYCARBONATE 15"
ROUND LUMINAIRE CLEAR
PRISMATIC OR WHITE
ORDERING INFORMATION
SAMPLE NUMBER: HPVC-CP-PP-70N-120V
AB CD
15" dia. 10 1/8" sq. 5 7/16" 3 1/2"
(381mm) (257mm) (138mm) (89mm)
B
C
A
D
Lamp Type
HP=High
Pressure
Sodium
MH=Metal
Halide
Product Family
15" Round Semi-
Recessed Series
VC=Clear
Prismatic
Polycarbonate
Lens
VW=White
Polycarbonate
Lens
Wattage
35=35W
50=50W
70=70W
100=100W
Ballast
N=Normal
Power
Factor
H=High Power
Factor
Paint Configuration
PP=Perimeter Paint
(Standard)
HE=Horizontal
Eyelid
Voltage
120=120V
277=277V
Accessories
(Order Separately)
VRSD=V-R
Screwdriver
for all Lens
Screws
VRSB=V-R
Screwdriver
Bit for all Lens
Screws
Options
F1=Single Fused
F2=Double Fused 4
LL=Lamp Included
LH=Less Recessed
Housing
Q=Quartz Restrike
(Lamp by
others)
QS=Quartz Socket
Only (Lamp by
others)
Back Box
BB=Standard
Recessed
Housing
(Combustible)
CP=Concrete Pour
Recessed
Housing (Non-
combustible)
Color
Blank=Black (Standard)
WHT=White
DBZ= Bronze
AP=Gray
REGRESSED SAMPLE NUMBER
HPVC-BB-PP-70H-120V
Complete Unit
REGRESSED HOUSING MOUNTING AND ADVANCED ORDERING INFORMATION
HPVC-LH-BB-PP-70H-120V VC/BB
+
=
BB=Combustible Material Application
CP=Brick or Concrete Pour
LH=
Less
Regressed
Housing
The following regressed
housings may be ordered
in advance
VC/BB=For Combustible (Studwall) Applications
VC/CP=For Non-Combustible (Brick, Concrete-
Pour) Applications
ORDERING MATRIX
Notes: For additional options, consult your Cooper Lighting Representative. Specifications and dimensions subject to change without
notice. Products also available in non-US voltages and 50Hz for international markets.
1. Fixtures are semi-recessed. Must specify BB for combustible material application or CP for concrete pour application. 2. Only available
as HPF. 3. Not available with white lens. 4. F2 option for use with 208/240/480 only.
PP=Perimeter Paint
HE=Horizontal Eyelid
1424
