Cooper Lighting LUMARK M4 User manual

WALL MOUNT
573
COOPER LIGHTING
COOPER LIGHTING - LUMARK®
M4
MON-4
70-400W
High Pressure Sodium
Pulse Start Metal Halide
Metal Halide
CUTOFF WALL MOUNT
LUMINAIRE
MOUNTING DETAILS
NOTES: 1 All lamps are mogul-base except 150W Metal Halide and lower are medium-base. 2Not available in 175W. 3175, 200, 250, 320, 350 and 400W only.
Limited lamp availability, consult factory. 4Maximum lamp wattage, 250W High Pressure Sodium and 175W Pulse Start Metal Halide & Metal Halide.
5Pulse Start Metal Halide only. 6Product also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering
information. 7Multi-Tap ballast is 120/208/240/277 wired 277V. 8Triple-Tap ballast is 120/277/347V wired 347V. 95-Tap Ballast is 120/208/240/277/480V wired
480V. 400W Metal Halide only. 10 Add as suffix in the order shown. 11 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based
on luminaire requirements. Specified lamps must be ordered as a separate line item. 12 Order separately. 13 Consult your Cooper Lighting Representative for
availability and ordering information. 14 Specifications and dimensions subject to change without notice.
Options 10
Q=Quartz Restrike (Cold Start)
EM=Quartz with Time Delay (Hot and Cold Start)
F1=Single Fuse (120, 277 or 347V) Specify Voltage
F2=Double Fused (208, 240 or 480V) Specify Voltage
PE=Photocontrol (Specify Voltage)
LL=Lamp Included 11
QLL=Quartz Lamp Included
Accessories 12
SD2925=Screwdriver for Tamper-resistant Screws
ORDERING INFORMATION
SAMPLE NUMBER: MHM4-P-400-MT-LL
Lamp Type
MH=Metal Halide 1
HP=High Pressure
Sodium 2
MP=(CWA) Pulse
Start Metal
Halide 2, 3
Product
Family
M4=Mon-4
Lens Type
P=Polycarbonate 4
GL=Borosilicate
Glass
Lamp
Wattage
70=70W
100=100W
150=150W
175=175W
200=200W 5
250=250W
320=320W 5
350=350W 5
400=400W
Voltage 6
120V
208V
240V
277V
347V
480V
MT=Multi-Tap 7
TT=Triple-Tap 8
5T=5-Tap 9
Options &
Accessories
(See Below)
2 3/4"
[70mm]
5"
[129mm]
6 13/16"
[173mm]
• One-piece, heavy-duty,
die-cast aluminum
housing is finished in
dark bronze polyester
powder coat
• Normal or high power
factor compact coil and
core ballast with class H
insulation
• Anodized aluminum
reflector is designed for
optimum light control
and sharp cutoff
(adjustable from 70° to
86°)
• Mogul-base porcelain
enclosed screw-shell
socket, except 150W MH
and lower which is
medium-base
• Closed-cell high-
temperature silicone
gasketing seals out
external contaminants
• Lens lowers on
spring-loaded retaining
wires for quick access
to internal components
during relamping and
maintenance
• U.L. listed for wet
locations. CSA certified
• Approximate net weight:
47 lbs. (21 kgs.)
DIMENSIONS DESCRIPTION
The Lumark MON-4 features
a injection-molded polycarbonate
housing / lens and a die-cast
aluminum back plate for rugged
durability. U.L. Listed for wet
locations. CSA certified.
12"
[305mm]
6 1/4"
[159mm]
16 1/2"
[419mm]
9 1/2"
[241mm]
COMPLIANT Cuto
DARK SKY CO
LAMP TYPE WATTAGE
Metal Halide 70, 100, 175, 250, 400W
Pulse Start Metal Halide 175, 250, 320, 350, 400W
High Pressure Sodium 70, 100, 150, 250, 400W