Cooper Lighting Neo-Ray 201-IW User manual

NOTES: For complete product data, refer to the Neo-Ray Specification Binder. Specifications and dimensions subject to change without notice. Products may be
modified for use in international markets. Please contact your Cooper Lighting Sales Representative for availability and ordering information.
738 COOPER LIGHTING
SHELL II
201-IW
DIRECT-INDIRECT
WALL
7-7/8" [200mm]
2-1/2"
[63mm]
ORDERING INFORMATION:
Sample number: 201IW-SP-1T5HO-1C-120-SU-WA-24
Series
201IW=Shell II Wall Mount
Optics Up
S=Specular
Optics Down
P=Perforated
Number of Lamps (not included)
1=1 Lamp 2=2 Lamps (T5 only)
Lamp Type
T5HO=54W HO (4’ Unit) T8=32W (4’ Unit) (1 Lamp only)
Number of Circuits 1
1=1 Circuit 2=2 Circuits (Side by Side)
Wiring
C=Standard Circuit E=Emergency/Night Light
D=Dimming B=Battery Pack
Voltage 1
1=120V 2=277V 3=347V U=Universal
SU-WA=Surface/Wall Mount
Run Length
Individual or continuous runs will be configured with 4’ and 8’
sections only (see sample catalog #)
1 Due to various constraints, some options may not be combined with others.
Construction
Housing is one-piece, die-formed, cold rolled steel,
forming a 7-7/8” x 2-3/4” architectural profile.
Perforated sections are 33% with staggered hole
pattern with white acrylic overlay. Standard 4’-0”
and 8’-0” luminaire lengths combine for continuous
runs.
End Caps
Standard end caps are precision die-cast aluminum
mechanically attached without exposed fasteners.
Reflectors
Reflector is die-formed, semi- specular anodized
aluminum.
Electrical
Luminaires are prewired with quick wire connectors
and use UL list Class P, T5HO or T8 electronic
ballasts. Power factor of 97% with less than 10%
THD. Fixtures and electrical components certified to
UL and CUL standards.
Finish
Luminaire housings are standard white using
electrostatically applied acrylic powder coat paint.
Mounting
Fixture mounts directly to existing structure over a
2” x 4” standard electrical box mounted
horizontally in the wall.
• Semi – indirect light
distribution.
• T5 and T8 lamping options.
• Die formed steel perforated
housings.
• Modular housing lengths –
4’and 8’ for individual or
continuous runs.
• Precision die cast end caps.
• Adjustable mounting block
for accurate leveling.
48"[1219mm]*
96"[2438mm]*
*Dimensions do not include end caps.
STANDARD LUMINAIRE LENGTHS*
END CAP
1-1/4"
[38mm]
2-1/2"
[64mm]
7-1/8" [181mm]
= Slim Line Ballast only.
S
S
T8 = 1 Lamp
T5 = 1 or 2 Lamp
NEO-RAY™