Coopers of Stortford 10724 User manual

Easy Use Flip Mobile 10724
Instrucons for Use
V003: 01/08/17
Power Details: AC Charger Input voltage: 100-240V ~
50/60Hz, 200mA
Cradle Input Voltage: DC 5V, 500mA
Cradle Output Voltage: DC 5V, 500mA
Accessories: Cradle, Charger, Instrucon manual, 3.7V
Lithium-ion baery included.
Please read this instrucon manual thoroughly before
starng and ensure you are familiar with the operaon
of your new Easy Use Flip Mobile
Please read and retain these instrucons for future reference

FOLLOWED:
READ ALL INSTRUCTIONS BEFORE USE.
TO PROTECT AGAINST ELECTRIC SHOCK, DO NOT
IMMERSE THIS APPLIANCE OR BATTERY IN WATER
OR ANY OTHER LIQUID.
DO NOT OPERATE ANY APPLIANCE THAT HAS
MALFUNCTIONED OR HAS BEEN DAMAGED IN ANY
MANNER.
THE USE OF ANY ACCESSORY OR ATTACHMENTS
NOT RECOMMENDED BY COOPERS OF STORTFORD
MAY CAUSE INJURIES AND INVALIDATE ANY
WARRANTY YOU MAY HAVE.
DO NOT PLACE ON OR NEAR HEAT SOURCES.
DO NOT USE THIS APPLIANCE FOR ANY OTHER USE
THAN THE INTENDED USE IT IS DESIGNED FOR.
BEFORE USE, CHECK THOROUGHLY FOR ANY
DEFECTS AND DO NOT USE IF DEFECTS ARE FOUND.
TAKE CARE NOT TO DROP THE APPLIANCE AS HEAVY
IMPACTS MAY CAUSE INTERNAL DAMAGE.
SAFETY INSTRUCTIONS:
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE
Easy Use Flip Mobile 10724 Instrucons for Use
V003: 01/08/17Please read and retain these instrucons for future reference

Instructions of buttons and telephone appearance
1. Earpiece
2. Arrow keys
3. Left selection key
4. Call key
5. Voice mail
6. Torch key(On/Off)
7. Right selection key
8. End call/Power on/
Power off
9. Speed dial keys
10. Silent/Input method
Easy Use Flip Mobile 10724 Instrucons for Use
V003: 01/08/17Please read and retain these instrucons for future reference

Instructions of buttons and telephone appearance
11. SOS Key
12. LED light
(Missed calls/Missed
message/Charging)
13. Torch light
14. Loudspeaker
15. Battery cover
16. Micro USB charging
socket
17. Seat-type charging
socket
Easy Use Flip Mobile 10724
Instrucons for Use
V003: 01/08/17
Please read and retain these instrucons for future reference

Installation
Turn offthe phone and disconnect the charger before
removing the baery cover.
-
Insert the memory card into the slot under the SIM card
holder, make sure card's contacts facedownwards, take
care and please do not scratch or bend the contacts on
the card. You can check thepictures as below:
Easy Use Flip Mobile 10724 Instrucons for Use
V003: 01/08/17Please read and retain these instrucons for future reference

T-Flash card is used as phone storage, when connected
to a computer by USB cable. You can copy Music,
Pictures or Photos onto the card.
Installing the SIM card
1) Insert SIM Card into the SIM card slot in the memory
card holder.
(Make sure the SIM card's contacts are facing inwards.)
2) Before taking out the SIM card, please turn off the
phone first.
Easy Use Flip Mobile 10724 Instrucons for Use
V003: 01/08/17Please read and retain these instrucons for future reference

For the first me use, please drain the baery and charge
for 4 hours to achieve the best state of baery.
Remove the baery cover, insert the baery into the
baery compartment, and replace the baery cover.
Easy Use Flip Mobile 10724 Instrucons for Use
V003: 01/08/17Please read and retain these instrucons for future reference

Phonebook
Search
You can speed search the contact person by entering the
inial leer.
Add new contact:
You can add a new contact to the SIM card or phone, press
Save to confirm.
1. Press Menu to select Phonebook and press OK
2. Select Add new contact and press Opons
3. Press Select to choose To phone or To SIM
4. Enter name and telephone number.
5. Setup Caller picture: Press the keypad and to
select the picture from Defaultor from file.
6. Setup Caller ringtone: Press the keypad and to
switch ringtone.
7. Press Options to Save.
Easy Use Flip Mobile 10724 Instrucons for Use
V003: 01/08/17Please read and retain these instrucons for future reference

Photo contact
1. Press Edit, enter a name and numbers for new
contacts
2. Use to select Caller picture or Caller ringtone
2.1 Caller picture( Options Select).This picture will be
displayed when you call the corresponding contact or
when they are calling you.
From file select from Phone or Memory card to select an
exisng picture, and press Open.
Remark: default image size 240x320pixel to improve the
Caller picture.
2.2 Caller ringtone(Options Select) to select incoming
call ringtone.
3. Press Options and scroll to Save, then press Select to
save.
Easy Use Flip Mobile 10724 Instrucons for Use
V003: 01/08/17Please read and retain these instrucons for future reference

Phonebook settings
Messages
Press Menu to select Phonebook to select Add new
contact, then go to select Phonebook settings
1. Preferred storage: you can save the new contact to the
SIM card , phone or both.
2. Memory status: to check how many contacts are on the
SIM card and the phone(max.250).
3. Copy contacts: you can copy the contacts to the SIM
card or to the phone.
4. Move contacts: you can move the contacts to the SIM
card or the phone.
5. Delete all contacts: you can delete all the contacts in
the SIM card or the phone.
In the phonebook, you can check the contact persons,
send SMS, make a call, edit, delete,copy and add to
Blacklist.
Write SMS
1. Press Menu, scroll to Messages.
2. Select Write message then press OK.
3. Input your message then press Options.
4. Choose Send to and select either Add from phonebook
or Enter phone number.
Easy Use Flip Mobile 10724 Instrucons for Use
V003: 01/08/17Please read and retain these instrucons for future reference