Coopers of Stortford G714 User manual

180 Flashlight G714 Instructions for Use
Please read and retain these instructions for future reference v001: 13/02/20
INSTALL BATTERIES
1 2 3 4 5
1. Take the product out of the packaging box.
2. Rotate the end cap anti-clockwise and then separate it from the handle.
3. Take the battery holder out of the handle.
4. Install 3 * AAA batteries (not included) in the battery chamber following the right polarities.
5. Push the battery chamber back in to the handle. Replace the end cap and rotate it clockwise.
USE
1 2 3
The ON/OFF button is at the upper part of the handle. The alarm button is at the lower part of the head.
TEST AS A FLASHLIGHT
The button has a 3-step cycle as follows:
1. Press the button once. The front lights turn on.
2. Press the button again. The front and side lights turn on.
3. Press the button the third time. The front and side lights turn off.
TEST AS AN ALARM
Press the button once. The alarm is on and the front lights flash quickly (strobe).
Press the button again. The alarm and the front lights turn off.
Alarm
button
On/OFF
button

180 Flashlight G714 Instructions for Use
Please read and retain these instructions for future reference v001: 13/02/20
CHANGE BATTERIES
Follow step 2 to 5 under “INSTALL BATTERIES” to remove and replace depleted batteries.
SPECIFICATION
Material: ABS+TPR / Size: 16.9(L) x 6(W) x 2.8(H) cm / Powered by 3 x AAA batteries (not incl.)
LED: 9 x white/brightness: 150 lumens / Alarm DB Level: 80-100db (within 10 to 15 feet)
DISPOSAL
Dispose of all packaging, paper, cartons, plastic and plastic bags in accordance with your local
recycling regulations.
•Plastics –This is made from the following plastic: ABS plastic and TPR (Thermoplastic Rubber)
At the end of the product’s lifespan please dispose of it at an authorised household WEEE waste
recycling centre.