Coopers of Stortford Solar Trellis Planter User manual

Solar Trellis Planter 10582 Instructions for Use
Please read and retain these instructions for future reference v001: 17/10/16
Parts List:

Solar Trellis Planter 10582 Instructions for Use
Please read and retain these instructions for future reference v001: 17/10/16
Assembly Instructions:
1. Take the 2pcs of Part 4 (Small Boards with fasteners) and 2pcs of Part 5 (Small
Boards with holes) and connect them to make the Planter Base.
2. Take 1pc of Part 3 (Medium Connector) and slide them onto the middle of Part 8
(Metal Pole). Repeat with the second Metal Pole.
3. Then insert one of Part 2 (Small Connectors) on the top of one of the Metal Poles.
Repeat with second Metal Pole.
4. Then insert the Metal Poles into the holes at the back of the Planter Base and push
the Middle Connector into the hole to hold the Metal Pole in place.
5. Take Part 7 (Large Board) and slide this down over the Metal Poles and secure in
place. Please make sure that you put the short side over the poles.
6. Take Part 6 (Plastic Sheet) and insert into the Planter.
7. Then take Part 1b (Two Dome Connectors) and insert them onto the front of the
Planter.
8. Take two Part 3 (Medium Connectors) and push them into the top of the back frame
and insert Part 1a (Two Solar Lamps) onto them.
WARNINGS / CAUTIONS:
Take care when moving the Solar Trellis Planter.
Please protect and store the Planter in a dry place in extreme weather conditions.
Cleaning Instructions:
Wipe clean with a damp cloth.
Disposal:
•Dispose of all packaging, paper, cartons and plastic, plastic bags in accordance with
your local recycling regulations.
•At the end of the product’s lifespan please dispose of it at an authorised household
waste recycling centre.