Coopers 9309 User manual

1
Please read carefully and retain for future
reference.
Auto Fruit & Vegetable Peeler 9309
Parts:
Auto Peeler (Fully Assembled)
AC Adaptor
2 x Spare Blades (located in base of peeler)
Plastic Food Blemish Knife (located on base of
peeler)
Peeler can be used with both mains adaptor and
batteries.
Please make sure all parts are enclosed as listed
before using the item.
How to Peel Fruit & Vegetables:
1. Centre the fruit or vegetable you wish to peel on bottom
of the food holder and press gently. The holder will spear
the food item and hold it firmly in place.
2. Lower the upper food holder gently onto the food item.
The attached spike should spear the top of the food item
holding it firmly in place.
3. Using the height adjustment lever on the right hand side
of the cutting arm, gently squeeze inwards, this will allow
you to move the cutting arm up and down. Raise or lower
the cutting arm so that it rests on the top of the food to
be peeled
4. The red button located on the right hand side of the base
operates the peeler. Press down once to turn ON and
again to turn OFF. Once the food item is in place; press
lightly to begin peeling. The skin will peel in one
continuous curl and the Auto peeler will automatically
stop when the cutter arm reaches the bottom. Should
you wish to stop the peeler whilst in use, press down
lightly on the red button which will turn it OFF.
To use with Batteries:
Insert 4x AA Batteries (not supplied) into battery
compartment located on the base of the peeler.
Make sure batteries are inserted in line with the
polarity guidance marked within the battery
compartment.
Replace cover to battery compartment
If item is stored for long periods of time or is being
used with the AC adaptor; remove batteries to
prevent damage occurring.
To use with AC Adaptor:
Insert AC adaptor lead into AC socket on the peeler.
This is located on the back of the base.
Plug AC Adaptor into mains socket

2
How to Change the Peeling Blade:
The Auto Peeler comes with 1x cutter blade affixed
and 2 spares which are stored in the base of the
product. Blades will require changing once they
become blunt from use or if the blade begins to
skip or jam. To change the blade:
1. Remove a spare cutter blade from the blade
storage compartment located on the base of the
product.
2. Remove the cutter head by gently pressing in the
grip on the right hand side of the blade and
pulling the lock in attachment from the cutter
arm.
3. Unlatch and slide the used blade away from the
blade holder in a downward movement. Dispose
of the used blade safely following your local
authority disposal regulations.
4. Affix the new blade by sliding down the ridge of
the blade holder until the small red latch clicks
into place. Make sure the blade is securely in
place before proceeding
5. Insert the cutter head back into the cutter arm
and ensure it is securely in place.
Helpful Hints:
When choosing foods to be peeled, choose
fruits and vegetables that are firm and
symmetrically shaped.
Fruit and vegetables more than 14cm (5.5”)
tall or 11cm (43/8”) wide should be cut in half
so that the Auto Peeler is able to grip them
between the upper food holder and the
bottom food holder.
Use plastic blemish knife to remove any
blemishes from fruit and vegetable before
and after peeling.
Warning:
Do NOT touch cutter blade when in use, it is
very sharp.
Take care when handling the cutter blade.
Do NOT immerse in water
Cleaning:
Wipe clean using a soft, soapy damp cloth. Dry
thoroughly before further use or storing.
Disposal:
Dispose of the packaging at your local recycling
centre.
Dispose of paper and carton separately from
plastic bags.
Dispose of the appliance at the end of its lifespan
at your local authorised household waste
recycling centre.
Dispose of all used cutter blades following local
authority disposal regulations.
Dispose of batteries safely and in accordance
with your local authority regulations.