Coopers 9636 User manual

Oil Filled Radiator 9636 Instructions for Use
Please read and retain these instructions for future reference v004: 20/06/18
This product is only suitable for well insulated spaces or occasional use. FUTURE
REFERENCE.
Power Details: 230V A.C.
50 Hz
600 W
PARTS: 1x Radiator
2x Feet
INSTALLATION –FREE FLOOR STANDING ONLY
•Place base of radiator into the grooves on the feet,
ensuring the feet are evenly spaced.
•Always ensure that the radiator is stood on a firm, level
base near to, but not directly beneath, a suitable fixed
socket outlet.
•Unwind the mains lead fully before plugging in the
radiator. DO NOT pull the radiator along by the mains
lead.
•AS WITH ALL PORTABLE HEATING APPLIANCES –THIS PRODUCT IS ONLY SUITABLE FOR WELL INSULATED
SPACES OR OCCASIONAL USE.
OPERATION:
•Connect the radiator to the mains.
•Set the temperature knob to the highest setting. Press the ON/OFF button to the ON position (‘I’). The red
LED will illuminate when the radiator is on.
•When the desired room temperature is reached, turn the temperature knob anti-clockwise until it clicks.
The radiator will then maintain this temperature.
WARNING:
•FOR USE AS FREE STANDING PORTABLE HEATER. NOT DESIGNED FOR WALL MOUNTING
•BEFORE USE, CHECK THE MAINS VOLTAGE ON THE APPLIANCE CORRESPONDS TO THE MAINS VOLTAGE
OF YOUR HOME.
•CHECK ALL PARTS, INCLUDING THE POWER CABLE, FOR DAMAGE BEFORE USE.
•DO NOT USE IF DAMAGED IN ANY WAY.
•THIS HEATER IS FILLED WITH A SPECIAL OIL. DO NOT USE IF OIL LEAK OCCURS.
•ALWAYS UNPLUG THE HEATER AND ALLOW TO COOL BEFORE HANDLING.
•DO NOT ALLOW CHILDREN TO PLAY CLOSE TO THE RADIATOR OR TO OPERATE THE RADIATOR.
•DO NOT INSTALL THE HEATER BENEATH A MAINS POWER SOCKET.
•SOME PARTS OF THE RADIATOR BECOME VERY HOT AND MAY CAUSE BURNS, TAKE CARE AROUND THESE
PARTS.
•DO NOT TOUCH THE RADIATOR DIRECTLY WHILE IT IS IN USE. KEEP THE POWER CORD AWAY FROM HOT
PARTS OF THE RADIATOR.
•NOT FOR USE IN BATHROOMS, LAUNDRY ROOMS, POOLS OR OTHER AREAS THAT MAY GET DAMP.

Oil Filled Radiator 9636 Instructions for Use
Please read and retain these instructions for future reference v004: 20/06/18
•DO NOT PLACE FLAMMABLE MATERIALS ON OR AROUND THE RADIATOR.
•THE RADIATOR MUST ONLY BE USED IN AN UPRIGHT POSITION.
•DO NOT INSERT ANYTHING INTO OR BLOCK THE VENTILATION HOLES.
•DO NOT PLACE ANYTHING OVER THE RADIATOR AS THIS MAY CAUSE IT TO OVERHEAT.
•THIS APPLIANCE SHOULD ONLY BE USED BY PERSONS (INCLUDING CHILDREN) WITH REDUCED PHYSICAL,
SENSORY OR MENTAL CAPABILITIES, OR LACK OF EXPERIENCE AND KNOWLEDGE, PROVIDING THEY HAVE
BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF THE APPLIANCE BY A PERSON
RESPONSIBLE FOR THEIR SAFETY.
•THE APPLIANCE IS NOT INTENDED TO BE OPERATED BY MEANS OF AN EXTERNAL TIMER OR SEPARATE
REMOTE-CONTROL SYSTEM.
HEATING TECHNICAL DETAIL:
Model identifier(s): NW-60
Item
Symbol
Value
Unit
Heat output
Nominal heat output
Pnom
0.61
kW
Minimum heat output
(indicative)
Pmin
0
kW
Maximum continuous heat output
Pmax,c
0.61
kW
Auxiliary electricity consumption
At nominal heat output
elmax
N/A
kW
At minimum heat output
elmin
N/A
kW
in standby mode
elSB
N/A
kW
Item
Unit
Type of heat output/room temperature control
single stage heat output and no room temperature control
No
Two or more manual stages, no room temperature control
No
with mechanic thermostat room temperature control
Yes
with electronic room temperature control
No
electronic room temperature control plus day timer
No
electronic room temperature control plus week timer
No
Other control options:)
None
Contact Details: COOPERS OF STORTFORD, 11 BRIDGE STREET, BISHOP’S STORTFORD, CM23 2JU
PLUG WIRING (UK & IRELAND)
This appliance is fitted with a moulded BS 1363 13-amp plug. If you have to replace the fuse, only those that are
ASTA or BSI approved to BS1362 and with a rated current of 13-amps should be used.
If there is a fuse cover fitted, this cover must be re-fitted after changing the fuse. If the fuse cover is lost or
damaged the plug must not be used. Spare fuse holders and fuses are available from electrical outlets. If the
socket outlets in your home or office are not suitable for this product’s plug, the plug must be removed and
disposed of safely. Attempts to insert the plug into the wrong socket is likely to cause electric hazard.
The cable

Oil Filled Radiator 9636 Instructions for Use
Please read and retain these instructions for future reference v004: 20/06/18
A mains electricity cable contains two or three inner wires. Each has a core of copper and an outer layer of flexible
plastic. This product is earthed; the wires in the cord set are colour coded in the following way:
BLUE NEUTRAL
BROWN LIVE
GREEN & YELLOW EARTH
The diagram shows the key features of a correctly wired three-pin mains plug.
CLEANING
•Always unplug from the mains and allow the radiator to cool before cleaning.
•Wipe away dust with a soft, dry cloth or using a vacuum cleaner or hairdryer to remove dust from hard to
reach parts.
•Wipe the surface of the radiator clean with a soft damp cloth moistened in warm water.
•Dry with a soft cloth after cleaning.
•Do not use any abrasive scourers or cleaning agents.
•In the case of oil leaking from the radiator, avoid contact with skin and eyes. In case of contact with eyes,
rinse immediately with plenty of water and seek medical advice. Wear suitable Personal Protective
Equipment when dealing with spillages to minimise skin contact and prevent inhalation. Cover the spill
area with dry sand and transfer to a secure container for disposal in accordance to local authority
regulations. Wash spill area thoroughly after clean up.
DISPOSAL:
•Dispose of all packaging, paper, cartons and plastic, plastic bags in accordance with your local recycling
regulations.
•At the end of the product’s lifespan please dispose of it at an authorised household WEEE waste recycling
centre and follow the regulations concerning the disposal of oil.