Coopers G211 User manual

Leather Look Desk Chair G211 Instructions for Use
Please read and retain these instructions for future reference v004: 20/01/20
Dimensions:
95.5-105cm(H) x56cm(W) x66cm (D)
Max. weight load:
300kg
(2 person assembly recommended)
Parts
ASSEMBLY INSTRUCTIONS:
Unpack the components carefully. Please check all parts have been removed from the packaging.
A. Connect part 2 with part 3 and insert
5x part 1.

Leather Look Desk Chair G211 Instructions for Use
Please read and retain these instructions for future reference v004: 20/01/20
Lay the backrest (4)
horizontally on a flat
surface and attach to
the seat (7), you need
to press down to line
up the 4 holes. Put the
4 screws in but do not
tighten the screws yet.
Keep some of the
bubble wrap to put
down on the surface to
stop damaging the
material.
Attach height
adjustment and tilt
bracket (6) with 4
screws. Do not tighten
the screws yet.
Attach the arms (5),
first connecting the
seat and then the back
part of the chair.
Tighten the bolts and
put on the silver colour
caps.
Tighten the back rest
plate first then height
adjustment and tilt
brackets.
Slot the assembled seat into the assembled base.
Ensure all bolts and screws are tight.

Leather Look Desk Chair G211 Instructions for Use
Please read and retain these instructions for future reference v004: 20/01/20
Functions
To adjust height:
To lock and unlock tilt:
Tilt back
When adjusting the height upwards you might
have to reduce the pressure on the seat and rise
slightly whilst operating the lever at the same
time.
When locked the backrest is at an 90 degree
angle and does not tilt.
When unlocked, the chair can be tilted by about
40 degrees. The tilting angle is not adjustable.
CARE AND CLEANING INSTRUCTIONS:
Wipe with a clean dry cloth.
DISPOSAL
•Dispose of all packaging, paper, cartons, plastic and plastic bags in accordance with your local
recycling regulations.
•At the end of the product’s lifespan please dispose of it at an authorised household waste recycling
centre.
Unlock to tilt
Lock to stop tilt