Coopers G366 User manual

Metal Garden Bench G366 Instructions for Use
Please read and retain these instructions for future reference v001: 21/10/19
Parts List
Dimensions:
125cm x 52xm x76cm
Assembly instructions
Step 1
Connect arm rests with back panel with bolts
and nuts where shown. Loosely tighten only
at this stage.
Slatted wooden bench seat that curves slightly at the back for added
comfort
Cross lattice & swirl design back
Metal arms
Ideal for 2 people
Weatherproof & anti-rust
Max weight load:230kg
2 people assembly recommended.

Metal Garden Bench G366 Instructions for Use
Please read and retain these instructions for future reference v001: 21/10/19
Step 2
Fit 5 slats across using 5x bolts and
5x washers on both sides as shown.
Ensure the rear legs of the bench are
at a 90 degree angle. Do not tighten
bolts fully.
Step 3
Turn bench upside down and use
screws to fasten the strap vertically
across the slats and attach the
stabilisers. Use 2x screws on the
wooden slats and 2x short bolt and
washer on the metal.
Go around and fasten all bolts and
screws.
Maintenance
Periodically check all screws and bolts for tightness.
Cover or protect from adverse weather.
DISPOSAL
•Dispose of all packaging, paper, cartons, plastic and plastic bags in accordance with your local recycling
regulations.
•At the end of the product’s lifespan please dispose of it at an authorised household waste recycling
centre.