Coopers Honeymoon User manual

Honeymoon Table Chair Set F702 Instructions for Use
Please read and retain these instructions for future reference v001: 28/05/19
Dimensions:
Materials: MDF with veneer and steel frame
Parts
Table instructions
Connect 2x piece D to 2x piece B and 1x
C using screws K x12 and washers O x12
as shown with the Allen keys (P)
provided.
Table
Length: 85cm
Width: 52cm
Height: 80cm
Weight: 8.0kg
Weight capacity: 50kg
Chair:
Length: 47.9cm
Width: 44.5cm
Height: 80.8cm
Weight: 3.3kg
Weight capacity: 100kg

Honeymoon Table Chair Set F702 Instructions for Use
Please read and retain these instructions for future reference v001: 28/05/19
Fit part A x1 to assembled pieces using screws N
(x4) as shown.
Turn table over.
Chair instructions
Connect part G (x1) part E (x1) and F (x1)
using screw L (x1) and nut I (x1) as shown.
Where indicated by a circle connect G with F
on one side and G with E on the other side
using 2x screw J on either side.

Honeymoon Table Chair Set F702 Instructions for Use
Please read and retain these instructions for future reference v001: 28/05/19
Using screws M (x4) connect leg assembly with seat H (x1).
Repeat for the second chair.
CARE AND CLEANING INSTRUCTIONS:
Wipe with a clean damp cloth.
DISPOSAL
•Dispose of all packaging, paper, cartons, plastic and plastic bags in accordance with your local
recycling regulations.
•At the end of the product’s lifespan please dispose of it at an authorised household waste recycling
centre.