COP Security 15-CD455 SERIES User manual

High Resolution High Sensitivity
SDR Super Wide Dynamic Dome Camera
INSTRUCTION MANUAL

1
CONTENTS
PRECAUTION……………………………………………….2
FEATURE…………………………………………………….3
SPECIFICATIONS…………………………………………..3
INSTALLATION……………………………………………...4
OSD MENU OPERATION INSTRUCTION……………….6

2
PRECAUTION
Do not open or modify
Do not adjust the camera's internal circuits or power supply modules,
as it may cause damage to the unit. For internal set up and repair,
please consult our dealer.
Do not put objects inside the unit
Do not put metal objects or flammable substance inside the camera
for it may cause damage to the unit. If water or liquid gets inside of
the camera please disconnect power immediately and contact with
your dealer.
Be careful when handling the unit
Do not drop the camera and avoid it from strong shock or vibration.
Install away from electric or magnetic fields
It may interfere or distort the image when camera is installed close to
electric or magnetic fields. Ex: TV, Speaker, and etc.
Avoid from humidity, dust and heat
a. Do not install the camera in smoky, dusty or steamy areas.
b. Do not install the camera close to heat generating devices (for ex:
spotlights)
Protect the camera carefully from direct exposure to sunlight,
rain, and etc.
Cleaning
Do not touch the CCD directly. If necessary, use a soft cloth
moistened with alcohol to wipe off dust.

3
FEATURES
zSuper Hi- Res CCD with Star-Light more than 600TV Lines (D/N)
zSuper Wide Dynamic Range(SDR 52dB)Video Digital Signal Processor (SOC) IC
zAuto / Manual Electronic SHUTTER speed adjustable
zHigh Sensitivity, Low Smear, excellent anti-blooming
zOn Screen Display (OSD) set-up Menu
zMotion Detection, Privacy Marking, H / V Mirror, Freeze, Negative, Cross Line
z2X Digital Zoom with Manual Pan / Tilt
zBack Light Compensation adjustable
zS/N Ratio with Auto 3D-DNR
zChallenging High Lighting Condition
zBuilt-in Video/Power Surge Protection
SPECIFICATIONS
Model No.
Image Pick-up Device 1/3“ CCD Image Sensor (HI-Res.)
Total Picture Elements NTSC: 811 x 507, PAL: 765 x 595
Effective Picture Elements NTSC: 771 x 492, PAL: 753 x 582
Horizontal Resolution 560TV lines (Color) / 600 TV lines (D/N)
Minimum Illumination 0.01 Lux 0.001 Lux 0 Lux IR ON
Auto Iris Lens 3.7~12mm
IR CUT X YES
Rotation 3 Axis 2 Axis
Digital Zoom 2X, Manual, PAN / TILT
S/N Ratio WITH Auto 3D-DNR More than 56 dB
Wide Dynamic Range 48dB
Gamma Characteristic 0.45 / 1.0
Auto/Manual Electronic Shutter NTSC: 1/60s~1/120,000s, PAL: 1/50s~1/120,000s
Digital Slow Shutter 2X~64X
Flickerless Mode YES
MIRROR FUNCTION HORIZONTAL / VERTICAL / ROTATION

4
POWER INPUT
BNC(VIDEO OUT)
DUAL POWE
R
POWER+
POWER-
SINGLE POWER
POWER INPUT
BNC(VIDEO OUT)
IMAGE FUNCTION FREEZE、NEGATIVE、CROSS LINE
Auto Gain Control ON/OFF (6 ~ 24dB adjustable)
White Balance Auto (ATW, AWB, FIXED, Manual)/ 3200 ~ 10000 ºK
Back Light Compensation ON/OFF (48 Area adjustable)
Motion Detection On screen alarm
Video Output 1 Vp-p / 75 Ohms
Privacy Masking ON/OFF ( 4 Areas adjustable)
Synchronous System EXT / INT.SYNC. / (LINE LOCK OPTION)
Power Supply AC24 / DC12 V DC 12V
Power Consumption 2W 5W
Operating Temperature -10 ~65 (14 ~149 )℃℃℉ ℉
Dimension Φ 136 (D) X 100 (H) mm
Packing / Weight 1 CTN：12pcs BOX：18(W)X14.7(H)X11.5(D)mm
INSTALLATION
Step1:
Remove the 3 screws from the domes
housing.
Step2:
Attach the base of the housing to the
wall/ceiling by fixing the screws into the
drilled holes.
Step3:
Connect power and video signal (see left)
Ensure the polarity is correct when
connecting power to the terminal block. +/-

5
Sept 4:
Adjust the cameras focus, angle and
functions.
Step 5:
Attach the domes cover and insert the
screws.
OSD Key explains

6
OSD Menu Operating Instruction
S E T U P M E N U ( 1 / 3 )
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
1 I M A G E Q U A L I T Y
2 → 1 I R I S
3 2 A G C / S E N S
4 3 E N H A N C E
5 4 I R S E T T I N G
6 5 B A C K L I G H T
7 6 W H I T E BALANCE
8
9
10 N E X T . . .
11
12
S E T U P M E N U ( 2 / 3 )
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
1 F U N C T I O N M E N U
2 → 1 M O T I O N D E T E C T
3 2 D I G I T A L ZOOM
4 3 H / V R E V E R S E
5 4 F R E E Z E
6 5 C R O S S L I N E
7 6 M A S K
8 7 P O S I / N E G A
9
10 N E X T . . .
11
12

7
S E T U P M E N U ( 3 / 3 )
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
1 E X T R A S E T T I N G
2 → 1 L A N G U A G E
3 2 T I T L E
4 3 P R I O R I T Y S E T T I N G
5 4 R E S E T / SYNC
6
7
8
9
10 R E T U R N
11
12
1. To display OSD MENU on the screen, please press the ENTER
key for 2 seconds.
2. To turn of OSD MENU on the screen, please press the RETURN
key.
3. The UP, DOWN and ENTER keys to move and make the
decision.
DOWN
RET
U
RN ENTER
UP

8
IRIS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
1 I R I S
2 → W D R O N /OFF
3
4 P E A K O N/O F F
5 A █———————— P
6 A L C → A U T O /OFF
7 ———— █— — — —
8
9 A E S → F I X/AUTO
10
11
12
[VR / HOLD]: ALC setting is controlled by VR on camera board.
Please reference to “PRIORITY SETTING” function.
*[NOTE]: Keep the WDR mode working, please use an auto IRIS
lens and set the WDR ON, ALC AUTO, AES FIX
1/120(1/100).
* Wide Dynamic Range can be change via the bar which on the
WDR setting.
A G C / S E N S
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
1 A G C / S E N S
2 → A G C → A U T O /FIX
3 ———————— █
4
5 S E N S → A U T O /OFF
6 ———— █— — — —
7
8
9
10
11

9
E N H A N C E
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
1 E N H A N C E
2 E N H A N C E L E V E L
3 L———— █— — — — H
4
5
6
7
8
9
10
I R S E T T I N G
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
1 I R S E T T I N G
2 → O F F / E X T / A U T O
3
4
5
6
7
8
9
10
11
12
[SWITCH]: IR-cut on/off is controlled by DIP switch.
Please reference to “PRIORITY SETTING” function
that in extra setting menu for more detail.