Copernicus SAN003 User manual

SAN003, SAN003-0 - Version B - August 5, 2020 - Copernicus Educational Products Inc.
ºThis product is meant to be installed by a qualified installer.
ºIn its unassembled state, small parts present a hazard.
ºTo be used under direct supervision of an adult.
WARNING
Wall-mounted Hand Sanitizer Dispenser
Please Recycle
For assistance, please contact us:
1-800-267-8494
Email [email protected]om
Have your packing slip ready for reference
Assembly Guide
SAN003, SAN003-0_2020_B
Check out our other products online at
www.copernicused.com
NOTE:
Wall mounting hardware is not included.
Installer must supply hardware suitable for the mounting surface.
SAN003
includes hand
sanitizer dispenser
(HSD2)
SAN003-0
no hand sanitizer
dispenser included
SAN003
SAN003-0

SAN003, SAN003-0 - Version B - August 5, 2020 - Copernicus Educational Products Inc.
For assistance, please contact us:
1-800-267-8494
Email [email protected]om
Have your packing slip ready for reference
Dear Educator,
Thank you for purchasing the Wall-mounted Hand Sanitizer Dispenser. We hope it meets all your expectations
and you and your students enjoy using it in your school. If you have any questions, concerns or ideas on how
we can improve please let us know by contacting our Customer Solutions Ninjas at 1-800-267-8494 or
[e-mail].
Happy teaching,
Register your Product
Registering your warranty ensures we have all the information we need to make any future warranty claims quick and
easy. Please visit www.copernicused.com/warranty and complete the form within 10 business days from product
assembly. By registering your product, you will be entered into a draw to win Copernicus product.
Make a Warranty Claim
We offer a Lifetime Warranty on almost everything we make. Please call 1-800-267-8494 or email
[email protected]om to start your warranty claim. Proof of purchase will be required upon warranty claim (i.e. copy
of invoice).
Lifetime
All Components
Warranty
Warning! Hazard Risks!
Adult
Supervision
Please read the warnings below for important safety information regarding your product. Failure to read these warnings or
to follow the instructions below could result in personal injury or damage to your product that could void your warranty.
Customer Service - FAQ’s
www.copernicused.com
Check out some of our
other great products!
For any issues:
Please call Copernicus Customer Service, where we will be happy to help.
1-800-267-8494. Monday - Friday 8:00am - 4:30 pm EST.
Email our Customer Support Service at [e-mail]
?
?
?
This product is to be used under the supervision of an adult.
In its unassembled state, this product contains parts that can be hazardous to small children. This
product should be assembled by an adult.
Small
Parts
Kaylyn Belcourt
President
Assembly Guide
SAN003, SAN003-0_2020_B
Check out our other products online at
www.copernicused.com
Wall-mounted Hand Sanitizer Dispenser
2
SAN003
SAN003-0

SAN003, SAN003-0 - Version B - August 5, 2020 - Copernicus Educational Products Inc.
Hardware
Actual Size
A
C
B
6-32 x 3/8” Pan Head Screw
(4301352)
4x
6-32 Hex Nut
(430164)
4x
11/64” Flat Washer
(4301902)
4x
Before beginning, you should have:
Additional tools required:
Adjustable wrench
OR 5/16” Screwdriver
+1You will need:
Install top two wall mounting fasteners
Wall-mounting
Plate
(32284)
1x
SAN003
Child Lockout
Safety Feature
(32277)
1x
Wall-mounted Hand Sanitizer Dispenser
Drill
1x
Drill Bit
(Sized for
wall anchor)
1x
NOTE: INSTALLER
MUST SUPPLY HARDWARE
Pencil
1x
Pencil
1x
Mark and drill all three mounting holes
Recommended Wall Fasteners
(NOT INCLUDED)
#8 x Pan Head Screw
3x
#8 x Pan Head Screw
2x
Type and length to be
determined by installer,
depending on mounting
surface.
Type and length to be
determined by installer,
depending on mounting
surface.
Drill and Drill Bit
1x
1
Install wall anchors in all 3 holes (if required)
2
Install top 2 screws ONLY
Leave a 1/16” (1.5mm) gap between screw head and wall
3
3
1/16”
(1.5mm)
GAP
WALL
Wall-mounting
Plate
(32284)
1x
Child Lockout
Safety Feature
(32277)
1x
SAN003-0
Adhesive Tape
(700013)
8x
HSD2
Dispenser & Power Cable
(HSD2)
1x
SAN003
SAN003-0
OR

SAN003, SAN003-0 - Version B - August 5, 2020 - Copernicus Educational Products Inc.
2A
SAN003
ONLY
Install Dispenser onto Wall-mounting Plate
Actual Size:
A4x
C4x
You will need: (Not to Scale)
B4x
KEY
Dispenser
(HSD2)
1x
C
B
B
C
A
A
A
A
C
B
B
C
Wall-mounting
Plate
1x
1
KEY
NOTE:
If you are using your own dispenser please
proceed to next step (2B)
2
4
30s
Press your dispenser firmly against plate
for 30 seconds to ensure proper adhesion
3
1Peel off backing and press Adhesive Tape Strips
onto your dispenser (use as many strips as necessary)
2Peel off 2nd Adhesive Tape Backing
1 2
3
NOTE:
After applying adhesive tape, wait
24 hours before filling dispenser.
SPACE TAPE
EVENLY ON BACK
OF DISPENSER
x8 24h
2B
SAN003-0
ONLY
Install your own dispenser
You will need: (Not to Scale) User Provided
Dispenser
1x
Adhesive Tape
8x
Wall-mounting
Plate
1x

SAN003, SAN003-0 - Version B - August 5, 2020 - Copernicus Educational Products Inc.
3
Install Dispenser and Wall-mounting Plate onto wall
2Hook keyholes on back of wall plate onto top 2 screws
3Fasten bottom of Dispenser with screw
You will need: (Not to Scale)
Dispenser mounted
to Wall Plate
1x
Keyhole
Actual Size:
NOTE:
Tighten screw all the way
Wall
Wall-mount Plate
#8 x Pan Head Screw
1x
Exact type and length
of fastener determined
by installer, depending
on mounting surface.
5
1Plug Power Cable into Dispenser
4Plug in Dispenser power cable
Dispenser Power Cable
1x
NOTE:
DO NOT HIT
POWER CABLE
WITH SCREW

SAN003, SAN003-0 - Version B - August 5, 2020 - Copernicus Educational Products Inc.
4
Install Dispenser Lockout into locked or unlocked position
You will need: (Not to Scale)
Child Lockout Safety Feature
1x
Dispenser - OPENDispenser - LOCKED
The child lock out safety feature prevents
students from draining dispensers or
ingesting sanitizer. This important feature
is not found on generic hand
sanitizer dispensers.
NOT
INCLUDED
Padlock (NOT INCLUDED)
1x
6