Core Lighting ALP-70 User manual
SURFACE MOUNT INSTALLATION GUIDE
ALP70INSTALLGUIDE |P1
15024 StaffCt., Gardena CA, 90248
T: 888.737.9192 | F: 888.789.4643
120V WIRE
1
WARNING: RISK OF ELECTRICAL SHOCK
* turn off main power prior to installation
* make sure hands are dry
* never touch exposed wires
2
3
ALP-70 Surface Mount LED Profile
Peel off adhesive backing on LED strip and
mount onto aluminum profile, making sure
that the whole length of the strip is pressed
firmly to adhere properly.
Remove plastic diffuser to install the LED strip
Run 120V wire through ceiling
ALP70INSTALLGUIDE |P2
15024 StaffCt., Gardena CA, 90248
T: 888.737.9192 | F: 888.789.4643
4
WARNING: RISK OF ELECTRICAL SHOCK
* turn off main power prior to installation
* make sure hands are dry
* never touch exposed wires
5
6
ALP-70 Surface Mount LED Profile
SURFACE MOUNT INSTALLATION GUIDE
Mount diffuser onto the profile
Install end caps
End cap
End cap
with hole
Make a hole at the mounting position where
aluminum profile will be installed.
ALP70INSTALLGUIDE |P3
15024 StaffCt., Gardena CA, 90248
T: 888.737.9192 | F: 888.789.4643
7
WARNING: RISK OF ELECTRICAL SHOCK
* turn off main power prior to installation
* make sure hands are dry
* never touch exposed wires
8
9
ALP-70 Surface Mount LED Profile
SURFACE MOUNT INSTALLATION GUIDE
Select appropriate mounting option and clip for your project and install accordingly.
Clip 90°Mounting clip 0-180°adjustable mounting clip
Connect lead wires from aluminum profile /
fixture to the output line of the power supply.
LED-
LED+
DIM-
DIM+
DRIVER
GND
AC-N
AC-L
Connect to DIM
-
+
LED
Completed
Table of contents
Other Core Lighting Lighting Equipment manuals
