Cornelius Nordic CCU0150 User manual

FEATURES:
NoRdic ccU0150 SERiES
Under CoUnter CUbed ICe Maker
CG5053-0112 Cubed ICe
Protected by Agion
• Produces up to 174 lbs. (79 Kgs.) of ice per day
• 100 lbs. (45 Kgs.) built-in application storage
• Built in Agion Antimicrobial product protection
effective against mold, mildew and fungus
• Ultra-low profile – only 39" (991 mm) tall and 24" (605 mm) wide
• Durable, rotomolded exterior cladding
• Large bin door opening for easy access
• Adjustable leg height
Agion is a trademark of Agion Technologies, Wakefield, MA.
Protected by Agion

For more information or to place an order, contact your sales representative or authorized distributor.
OUTSIDE THE U.S.A.
Ph: 763.488.8200
Email: [email protected]
IN THE U.S.A.
Ph: 800.238.3600
Fax: [phone]
101 Broadway Street West
Osseo, MN 55369
www.cornelius.com
© 2012 IMI CORNELIUS
NUMBER OF WIRES . . . . . . . . . . . 3
MAX. FUSE SIZE . . . . . . . . . . . . . . 15
SHIPPING WEIGHT LBS (KGS.) . . 160 (73)
AGENCY LISTINGS . . . . . . . . . . . .
oPeratInG LIMItS
Ambient Temp. Range Air & Water 50° - 100°F (10° - 38°C)
Water Temp. Range 40° - 100°F (4.5° - 38°C)
Water Pressure Ice Maker Water in Min. 20 psi (1.4 bar)
Max. 60 psi (4.1 bar)
Condenser Inlet Water
(Water cooled only)
Min. 20 psi (1.4 bar)
Max. 60 psi (4.1 bar)
Model No.
Cond.
Unit
Ice Prod.
per 24 hrs.
at 70° Air /
50° Water
lbs. (Kgs.)
Ice Prod.
per 24 hrs.
at 90° Air /
70° Water
lbs. (Kgs.)
Water Used-Gals. (Ltrs.)
per 100 lbs. of ice 90°
Air / 70° Water
Kilowatts
Used per
100 lbs.
of ice 90°
Air / 70°
Water
Heat
Rejection
(Btuh)
Electrical
Rating
Min.
Circuit
Amp.
Ice Prod.
Use Cond. Use
CCu0150A*11 Air 174 (79) 112 (51) 34 n/a 11.8 3572 115/60/1 9.7
* Represents cube size. For full cube substitute an “F”, for half cube substitute an “H”.
Please note: air-cooled units require 6” (152 mm) clearance for air intake and exhaust.
Note #1: Application bin storage is 100 lbs. (45 Kgs.) = 90% of Internal Volume x 34 lbs. per cubic foot
Note #2: ARI bin storage is 74 lbs. (34 Kgs.) = 80% of Internal Volume x 30 lbs. per cubic foot
1. 90°/70° figures are rated in accordance with ARI Standard 810.
24" (610 mm)
33"
(838 mm)
23 5/8"
(600 mm)
6" (152 mm) to 7" (178 mm)
Adjustable Legs
24" (610 mm)
17 1/2" (444 mm)
16 3/8" (416 mm)
2 5/8" (67 mm)
Electrical Inlet
7/8" (22 mm) D Hole
Icemaker — Water IN
1/4" (6 mm) Male Flare
30 1/16"
(764 mm)
Water Condenser — Water OUT
3/4" (19 mm) FPT
Water Cooled Units Only
Water Condenser — Water IN
3/8" (10 mm) FPT
Water Cooled Units Only
3/4"
(19 mm)
6"
(152 mm)
9"
(229 mm)
4 3/16"
(106 mm)
Icemaker Drain
9/16" (14 mm) I.D. hose
Bin Drain
9/16" (14 mm) I.D. hose
32" (813 mm)
1 7/16" (37mm)
39"
(991 mm)
24"
(610 mm)
Air In -
Right Front
of icemaker
Air Out -
Left Front
of icemaker
Dimensions and Air Flow
24"
(610 mm)
Cube Size: Width Depth Heigth
Full 7/8" (22mm) 7/8" (22mm) 7/8" (22mm)
Half 3/8" (10mm) 7/8" (22mm) 7/8" (22mm)