Cornelius SCOTSMAN CM1000 Series User manual

1
91855 12/16/96
R
e
v
i
s
e
d
2
/
1
2
/
9
7
IMICORNELIUSINC.
OneCorneliusPlace
Anoka.MN55303-6234
Telephone[phone]
Facsimile(612)422--3246
INSTALLATION INSTRUCTIONS
FOR INSTALLINGASCOTSMAN CM1000 SERIES ICE
MAKERON REMCORMODELDB275 SERIES ICE
DISPENSER
Note:Ifdispenserhasaflatstainless steelcoverinstalled, itshould beremovedand discarded.Use
following instructionstoassemblenewcoverand icemaker.Use page2for references.
1.Sealcoverto dispenserasfollows:
A.Unpack newcoverassemblyand run a bead ofRTVon the coverbottomflangestomatewith dis-
penserhopper.
B.Setcoveronto dispenserhopper.
C.Wipe excess RTVawayimmediately.
D.Cover mustbe sealed completelyto dispenserhopper.
2.Seal icemakerto dispensercover.
A.Applya bead ofRTVon the dispensercoveraround the outline of the icemakerframesidesand rear.
B.Seticemakerontocover.
C.Wipe excess RTVawayimmediately.
3.Secureicemakerto dispenserwithmounting bracketsprovided as shown on page 2.Drill holesand install
sheetmetalscrewsprovided intoicemakercabinet. Drilling mustnotinterferewithicemakercomponents.
4.Followthe manufacturer’sinstructionstocompletethe installation of the icemaker.

291855 12/16/96
R
e
v
i
s
e
d
2
/
1
2
/
9
7
24 30
APPLYRTVALONGBOTTOMEDGEOFICE
RAMPAND FRONTHOPPERLIP.COMPLETE
LIDMUSTBE SEALEDTOHOPPER.
ICEMAKERTOBEFLUSH
WITH BACK EDGEOFCOVER
APPLYRTVAROUND INSIDEOF
ICEMAKEROUTLINEON DISPENSER
COVERTOFORMASEAL.
REMOVE SCREWSAND TURN BRACKETS
AROUND 180_.REPLACE SCREWS.USING
BRACKETASTEMPLATE,DRILL (4).136 DIA.
HOLES INTOICEMAKER CABINET FOR
SCREWS PROVIDED.DRILLINGISNOT TO
INTERFEREWITHICEMAKER COMPONENTS.
REMOVABLEFRONT LIDFOR
MANUALICEFILLING.