Cornelius 2306 User manual

191933 12/9/96
IMICORNELIUSINC.
OneCorneliusPlace
Anoka.MN55303-6234
Telephone[phone]
Facsimile(612)422--3246
INSTALLATION INSTRUCTIONS
KIT,P/N 2306
Forinstalling Scotsman Model CM450,500,&650 SeriesIceMakerson RemcortModel DB200 SeriesIce/
Drinkdispenser.
1.Bin Level Control
A.Locate and drill three (3)5/16”diameterholes(Ref. Fig.1).
B. Install mounting clamps.
2.Seal icemakertotop ofDispenserasfollows:
A.Run a bead ofRTVon the dispensercoveraround the outline of the icemakerand inside edge ofcov-
eropening.
B.Seticemakerontocoverand install binlevelthermostatcapillarytube inclampsand tighten screws
(Ref. Fig 1).Position icemakeras shown.
C.Wipe awayexcess RTV.
3.SecureicemakertoDispenserwithmounting bracketsas show.Drill holesand install sheetmetalscrews
provided intoicemakercabinetand dispensercover.Screwsmustnotinterferewithicemakercompo-
nents.
4. Install adhesive backed gasketstriptoremovablelid,and install withscrewprovided.
5.Followthe manufacturer’sinstructionstocompletethe installation of the icemaker.Binlevelthermostat
capillarytube mustnotinterferewith agitator.

29193312/9/96
2808028080
2808028080
24 30
ROUTEICEMAKER BINLEVEL
THERMOSTATCAPILLARYTUBE
AS SHOWN. INSTALL ON
HOPPER AS SHOWNINFIG.1
ICEMAKERTOBE
FLUSHWITH BACK
EDGEOFCOVER.
APPLYRTVAROUND INSIDE
OFICEMAKEROUTLINEON
DISPENSER COVERTO
FORMASEAL.
REMOVE SCREWSAND TURN
BRACKETSAROUND 180_.
REPLACE SCREWS.USING
BRACKETASTEMPLATE,
DRILL (4).136 DIA.HOLES
INTOICEMAKER CABINET
FORSHEETMETALSCREWS
PROVIDED.DRILLINGISNOT
TOINTERFEREWITH
ICEMAKER COMPONENTS.
REMOVABLEFRONT LID
FORMANUALICEFILLING.
ADD ADHESIVE BACKEDGAS-
KETSTRIPS TOREMOVABLELID.

391933 12/9/96
15”
4--5/8
1”
DRILL 5/16 DIA.HOLES FOR8--32
WELD NUT
PLASTICTUBING
USE ASREQUIREDLARGECLAMP
(IFNEEDED)
CAPILLARYTUB-
ING
TOP-
VIEW
6
ICEMAKER
FRONTWALL
OFHOPPER
THERMOSTAT
CAPILLARYTUBE
1--5/8
INSERT8-32 WELL NUTSINTO5/16
DIA.HOLES,TIGHTENINGSCREWS
WILL SECURE
BINLEVEL THERMOSTATCAPILLARY
TUBINGASSEMBLY
LOCATEAND ADD
CLAMPHOLEIF
NEEDEDTORETAIN
CAPILLARYTUBING