Corporate Locksmiths CL270BLFP User manual

11-13 Thompson Street Abbotsford VIC 3067, Australia Call 1300 366 277 [e-mail]
CL270BLFP
Intelligent Bluetooth Lever Lock
Overview
The CL270BLFP is a Keyless Digital/Electronic Door Lock
which can be fitted as a front door lock. It can be operated
via pin, fingerprint, Bluetooth or from remote locations
using the TTLock iOS/Android app without the need for
Internet or WiFi. It is well suited for Homes, Offices,
Airbnb, Motels, Holiday Homes etc.
 Specific codes can be sent via SMS or E-Mail. These
codes can be temporary (1 day) or permanent.
 Bluetooth access (one-time, temporary, or permanent)
can also be shared by SMS or E-Mail.
 Fingerprint profiles can be added to the lock.
For More Informaon Call—1300 366 277 Or Contact Us

11-13 Thompson Street Abbotsford VIC 3067, Australia Call 1300 366 277 [e-mail]
Item no. CL270BLFP
Dimensions 303*70*130mm
Material Zinc Alloy (Black), Stainless Steel Mortise Lock
Weight 4KG
Communication mode Bluetooth 4.0BLE (Bluetooth Low Energy)
Unlocking Options Bluetooth, Code, Key, Fingerprint, Fob
Support System Android 4.3 / IOS 7.0 above
Unlock time ≈ 1.5 sec
Power supply 4pcs AA batteries
Static current ≤30uA
Working current ≤200mA
Product Specifications

11-13 Thompson Street Abbotsford VIC 3067, Australia Call 1300 366 277 [e-mail]
Add Bluetooth Admin
Touch the keypad to wake up lock, the lock will indicate “Please add Bluetooth
administrator ”, then you can add the Admin on the app.
Delete Bluetooth admin
1. When near the door lock, you can delete the Admin on the app and the lock will
indicate “Administrator deleted successfully”.
2. Hold the reset button on the back panel, the lock will indicate “Please enter the
initialization password”, then enter “000#”, the lock will be indicate “Administrator
deleted successfully”.
Add IC card
Choose “IC cards” on the app, the lock will indicate “Please swipe your card”, then
swipe card on the sensor zone.
Add fingerprint
Choose “Fingerprints” on the app, the lock will indicate “Please press your finger”, after
press your finger, the lock will indicate “please press again”, then press your finger
again. After this, the fingerprint will be added successfully
Password unlock
Input your passcode, then # (e.g. 0000#), If password verification is successful, the
lock will indicate “Unlocked”. If password is incorrect/expired, the lock will indicate
“Invalid password”, If you repeatedly enter incorrect passwords, the lock will indicate
“Illegal operation, the system is locked” or “Operation failed”.
Fingerprint unlock
Press the registered finger on sensor zone, the lock will indicate “Unlocked” or
“Operation failed”.
IC card unlock
After swiping the card on sensor zone, the lock will indicate ”Unlocked” or “Operation
failed”.
Lock
The lock will be automatically locked 5 seconds after unlocking, the lock will indicate
”Locked”.
Modify the user password
Enter (*10#”Old Code”#”New Code”#”New Code”#.)
Low power indication
When batteries are low, touch the keypad to wake up lock，a warning tone will indicate
”Low power, please change battery”. At the same time backlight flashes one second.
Keypad lockout
After 5 unsuccessful attempts at entering a pin code, the lock will indicate ”Failed” and
be unresponsive for 5 minutes. IC card, fingerprint or the app can be used to unlock in
this state, and the pin code can be used again after unlocking.
Bluetooth Fingerprint Lock Manual

11-13 Thompson Street Abbotsford VIC 3067, Australia Call 1300 366 277 [e-mail]
If the user does not wish to use the app to manage the lock, please operate
using the instructions below.
Change master code（Default code is 123456）
Enter *12#”Old code”#”New code”#” New code”#
Add Code/IC card/Fingerprint
Enter *85#Master Code# Enter fingerprint/Code/or Scan card
Delete all fingerprints
Enter *70#”Master Code”# delete all fingerprints
Delete all codes
Enter *71#”Master Code”# delete all codes including codes generated by the
TTLock App. (except the master code)
Add Bluetooth Admin
Enter *83#Master Code#
Note：Once you add the Bluetooth Admin, all users previously added will be in-
valid, you can add users inside the app.
Bluetooth Fingerprint Lock Manual

11-13 Thompson Street Abbotsford VIC 3067, Australia Call 1300 366 277 [e-mail]
Using The TTLock App

11-13 Thompson Street Abbotsford VIC 3067, Australia Call 1300 366 277 [e-mail]
Android Apple (iOS)
Installing TTLock
Search for “TTLock” on the App Store

11-13 Thompson Street Abbotsford VIC 3067, Australia Call 1300 366 277 [e-mail]
Bluetooth Lock functions
 Unlock your door with an eKey using the TTlock app
 Grant or revoke eKeys to guests and generate passcodes remotely
 Entry records for eKeys are viewable by the admin user
 Receive push notifications when door is unlocked
 Set validity periods for eKeys (eg: permanent or temporary (Active 2017.06.20 15:00 &
Expire 2017.06.21 10:00))
 Set validity periods for passcodes (eg: one-time, minute(s), hour(s), day(s), month(s), per-
manent)
 Bluetooth LE allows for a significantly longer battery-life (one-year), WiFi locks typically
drain batteries every few months, many of them require a separate base station
 Easily control all admin settings through the TTlock app
 Set one six-digit admin passcode of your choice
 Register a secure TTlock account to control your lock from multiple devices

11-13 Thompson Street Abbotsford VIC 3067, Australia Call 1300 366 277 [e-mail]
Pair your device:
1) Touch the digital keyboard, remove one battery, touch the keyboard
one more time, then put back the battery immediately.
2) Press the ‘#’ button within 3-5 seconds, you will hear ‘Di Di’ to confirm the lock is in discovery mode.
3) Immediately open your app, tap the menu icon in the top-left corner, then ‘add devices’, ‘lock’ and se-
lect your lock from the list. Your lock will only be selectable when it’s in discovery mode.
4) When you find your lock in the TTlock app, it means the pairing is successful, if not, try the above steps
again.
Changing the Admin code:
1) Open the TTlock app.
2) Select the lock you wish to change the admin code for.
3) Tap the ‘gear’ symbol in the top-right hand corner of the
screen.
4) Tap ‘Admin passcode’ and follow the prompts.
Sending e-Keys:
1) Open the TTlock app.
2) Select the lock you wish to authorise an eKey for.
3) Tap ‘eKey’. Choose period key or permanent key.
4) Input the person’s mobile number, leave a message, then tap
‘send’.
Sending passcodes:
1) Open the TTlock app.
2) Select the lock you wish to authorise a passcode for.
3) Tap ‘passcode’. Choose a validity period
(one-time, minute(s), hour(s), day(s), month(s), permanent).
4) Tap the ‘generate’ button to create a code.
5) Tap ‘Send Text Msg’ to send the code to the user.
Unlock:
1) Open the TTlock app.
2) Touch digital keyboard until the backlight is on.
3) Listen to the doorbell tone from your phone.
4) Hear the lock motor disengaging the dead bolt.
Receive a text message when one of your
family members arrives at home.

11-13 Thompson Street Abbotsford VIC 3067, Australia Call 1300 366 277 [e-mail]