CorrMed Porta-Thermal User manual

Instructions for loading your
CorrMed Porta-Thermal Carry Bag | Chilled 2-8C
30 Litre Thermal Carry Bag
STEP 4
Load 4 gels at the top and
place pillow on top.
Packing your bag
STEP 1
Load 1 block in to
each pocket.
STEP 3
Load vaccines, layer with
separators, insert the probe
in to the centre of the load.
STEP 6
Place bag in to the
trolley and clip on.
01452 830269 [e-mail]
STEP 2
Load 4 gels at the base.
STEP 5
Close the bag and
insert data logger in
to the pouch.
For more information on maintenance & care please visit our website
Before you start - Pre-condition coolant
Wipe the coolant down and place in a fridge
for 24 hours, as close to 2C as possible.
Prepare your data logger
Download the free tempbase software to
ensure the data logger settings are correct for
the temperature range and log cycle you wish
to monitor. If you are using a probe, ensure
‘probe mode’ is set to external.

Instructions for loading your
CorrMed Porta-Thermal Carry Bag | Chilled 2-8C
20 Litre Thermal Carry Bag
STEP 4
Load 4 gels at the top and
place pillow on top.
Packing your bag
STEP 1
Load 1 block in to
each pocket.
STEP 3
Load vaccines, layer with
separators, insert the probe
in to the centre of the load.
STEP 6
Place bag in to the
trolley and clip on.
01452 830269 [e-mail]
STEP 2
Load 4 gels at the base.
STEP 5
Close the bag and
insert data logger in
to the pouch.
For more information on maintenance & care please visit our website
Before you start - Pre-condition coolant
Wipe the coolant down and place in a fridge
for 24 hours, as close to 2C as possible.
Prepare your data logger
Download the free tempbase software to
ensure the data logger settings are correct for
the temperature range and log cycle you wish
to monitor. If you are using a probe, ensure
‘probe mode’ is set to external.

Instructions for loading your
CorrMed Porta-Thermal Carry Bag | Chilled 2-8C
10 Litre Thermal Carry Bag
STEP 4
Load 4 gels at the top and
place pillow on top.
Packing your bag
STEP 1
Insert 1 small block in
to each pocket.
STEP 3
Load vaccines, layer with
separators, insert the probe
in to the centre of the load.
STEP 6
And you’re ready to go.
01452 830269 [e-mail]
STEP 2
Load 4 gels at the base.
STEP 5
Close the bag and
insert data logger in
to the pouch.
For more information on maintenance & care please visit our website
Before you start - Pre-condition coolant
Wipe the coolant down and place in a fridge
for 24 hours, as close to 2C as possible.
Prepare your data logger
Download the free tempbase software to
ensure the data logger settings are correct for
the temperature range and log cycle you wish
to monitor. If you are using a probe, ensure
‘probe mode’ is set to external.

Before you start - Pre-condition coolant
Wipe the coolant down and place in a fridge
for 24 hours, as close to 2C as possible.
Prepare your data logger
Download the free tempbase software to
ensure the data logger settings are correct for
the temperature range and log cycle you wish
to monitor. If you are using a probe, ensure
‘probe mode’ is set to external.
Instructions for loading your
CorrMed Porta-Thermal Carry Bag | Chilled 2-8C
3 Litre Thermal Carry Bag
STEP 4
Close the bag and insert data
logger in to the pouch.
Packing your bag
STEP 1
Load vaccine in the base.
STEP 3
Place 1 gel on top and then pillow.
01452 830269 [e-mail]
STEP 2
Load 4 gels around the vaccine.
For more information on maintenance & care please visit our website