Costway TL35461 User manual

USER'S MANUAL
Kayak Roof Rack
TL35461
UNITED STATES
CANADA UNITED KINGDOM
GERMANY
FRANCE ITALY
SPAIN
JAPAN
RUSSIA
AUSTRALIA
With your inspiring rating, COSTWAY will be more consistent to offer you EASY
SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
Mit Ihrer inspirierenden Bewertung wird COSTWAY konsistenter sein, um Ihnen
EIN SCHÖNES EINKAUFSERLEBNIS, GUTE PRODUKTE und EFFIZIENTEN
SERVICE zu bieten!
Avec votre évaluation inspirante, COSTWAY continuera à fournir une
EXPÉRIENCE D’ACHAT PRATIQUE, des PRODUITS DE QUALITÉ et un
SERVICE EFFICACE !
Con su calificación inspiradora, COSTWAY será más consistente para ofrecerle
EXPERIENCIA DE COMPRA FÁCIL, BUENOS PRODUCTOS y SERVICIO
EFICIENTE.
Con la tua valutazione incoraggiante, COSTWAY sarà più coerente per offrirti
ESPERIENZA DI ACQUISTO FACILE, BUONI PRODOTTI e SERVIZIO
EFFICIENTE!
Dzięki twojej opinii COSTWAY będzie mógłoferowaćjeszcze WYGODNIEJSZE
ZAKUPY, LEPSZE PRODUKTY i SPRAWNIEJSZĄOBSŁUGĘKLIENTA.
US office: Fontana
UK office: Ipswich
DE office: FDS GmbH, Neuer Höltigbaum 36, 22143 Hamburg, Deutschland
FR office : 26 RUE DU VERTUQUET, 59960 NEUVILLE EN FERRAIN, FRANCE

02 03
1
2 3
5
6
4
Parts List
Qty
2
2
2
4
4
4
Part Name
Kayak Rack
Tie Down Strap
Metal Plate
Bolt
Knob
Washer
1
2
3
4
5
6
1. Pay attention to the car roof crossbar types described in the manual to avoid
installation conflicts.
2. Measure the height between the car roof and the crossbar before installa-
tion, and choose bolts of the appropriate length to prevent excessively long
bolts from scratching your car.
3. Make sure to only let the buckle with the wider fabric part touch the surface
of kayak to avoid the buckle directly touching and damaging your kayak.
4. If you are missing any parts or any parts are broken, please feel free to
contact our customer service team and we’ll help you out anytime, anywhere.
CAUTIONS
Assembly
Step 1: Unlock levers on both sides of rack.

04 05
90 0
Step 2: Unfold rack. Place vertical tube in 90° position, then lock levers on
both sides.
Metal Plates Base P ad C rossbar K nobsW ashers
Bolt
Step 3: Place rack on cross-bar. Make sure rack end doesn’t hang over end of
cross-bar. Attach racks with hardware: Insert two bolts through base pad. Attach
metal plate, washer and then knob. Tighten knobs on each bolt to secure rack.
Step 4: Position strap on upper section on each rack.
Step 5: Repeat Steps 1-4 for second rack.
Step 6: Load and center the kayak on the racks. Wind the strap end from above
the kayak to the front and place the buckle close to the kayak.

06
Step 8: The other strap is fixed in the same way.
Step 7: Pass the other strap end through the bottom of crossbar and then
wind the end to its top to touch the buckle. Push the end upward into the
buckle and tighten the strap.
Note: When racks are not in use, fold them down in the flat
position and lock. Remove straps and store in vehicle.