Costway baby joy ABST-H12 User manual




Please read all instructions carefully and keep it for future reference.
Warnings:
Attention: For home use only.
Suitable age range:6 mouths - 8 years old
Danger: Keep all small parts and packaging materials for this product away from babies and
children, otherwise they may pose a choking hazard.
Danger: Lack of attachment may cause a risk of tipping or fall hazards.
General Warnings:
The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
Remove all packaging, separate and count all parts and hardware.
Please ensure that all parts are correctly installed, incorrect installation can lead to a danger.
We recommend that, where possible, all items are assembled near to the area in which they will
be placed in use, to avoid moving the product unnecessarily once assembled.
Ensure a secure surface during construction, and place the product always on a flat, steady
and stable surface.
Please check and maintain regularly, the most important parts for suspension, fixing,
anchoring to the ground.
Product Information
Product name: UFO children's slide
Model: ABST-H12
Suitable age range: 6 months - 8 years old
③
④
②
①

④Nut*8
②Side panel*2
①Slideway*1 ③Pedal*2
1
2
Insert slide into side panel along slot
and tighten the nut
Insert pedal into side panel along slot
and tighten the nut

7
www.costway.com
3
4
Install the other side panel and tighten the nut
The assembly is complete
ALWAYS FOLLOW THESE RULES
Please read carefully and follow the following precautions/considerations
1. To be setup and installed only by an Adult.
2. This product is only suitable for children aged over 36 months.
3. Adult supervision is required at all times
4.Do not approach fire.
5. Installation area should be as wide as possible, flat and avoid dampness
6. Containing small parts, be careful not to swallow them by mistake,
should be used under adult's supervision
7. Check whether the product is firmly installed before use
8. Packing materials should be tidied up and properly preserved.
Maintenance
1. Please wipe the surface stains of product with a dry cloth. If necessary,
use mild soap or detergent to clean them. After wiping with a soft wet cloth,
wipe them with a dry cloth. Do not use a strong acid-alkaline cleaning solution
to clean them
2. If not used for a long time, please put it in a cool and dry place and cover it
with clean cloth or blanket

8