Using Your Food Chopper
1. Before first use, wash cover, bowl, and blade in hot, soapy water.
Blade is sharp; handle carefully. Rinse and dry.
2. Read “Chopping Tips”
3. Make sure chopper is unplugged.
Lock bowl onto base by turning counterclockwise.
See illustration
4. Place blade in bowl over center shaft.
Blade is sharp; handle carefully.
5. Place food in bowl.
6. Place cover on bowl and turn cover
counterclockwise to lock. See illustration.
7. Plug into electrical outlet. Press the LOW or
HI Pulse button to process. To turn off,
release the button. Do not remove cover
until blade has stopped turning.
8. Remove cover. Unlock bowl by turning clockwise.
Remove bowl from the base. Carefully remove blade.
Blade is sharp; handle carefully.
IF CHOPPER DOES NOT START: Review the previous steps to make
sure the bowl and cover are both in the locked positions.
Chopping Tips
● The bowl has a capacity of 3 cups. For liquid ingredients. Do not
exceed 3 cups (MAX LIQUID FILL line on bowl).
● For more control, process by pressing the LOW or HI Pulse button
briefly then releasing. Check consistency and continue if desired.
● Tear bread into pieces, then process to make bread crumbs. Break
crackers or cookies into pieces, then process into crumbs for use as
recipe ingredients or pie crusts.
● To chop carrots, celery, mushrooms, green peppers, or onions, cut
them into 1-inch chunks and place in a bowl. This will result in more
uniform consistency.
● Chop nuts; mince parsley, basil, chives, or garlic.
Puree small amounts of cooked fruit or vegetables for baby food or
use as a base for sauces or soups.
● Do not process coffee beans, baking chocolate, or whole, hard
spices in the food chopper. This could damage the chopper.
TO MAKE
Tips:
● Meat, Chopped Cut 300g into 20~25mm block , Pulse on15 s.
● Carrot, Chopped Cut 200g into 20~25mm block , Pulse on 30 s.
Care and Maintenance
WARNING: To avoid the risk of electric shock, always ensure the
product is unplugged from the electrical outlet before assembling,
disassembling, relocating, servicing, or cleaning it.
WARNING: Handle the Blades with care as they are extremely sharp.
Use caution when attaching, detaching, cleaning, or storing the
Blades.
● Always clean the product immediately after each use.
● Wash the Cover, Container Bowl, and the Blades in warm, soapy
water; rinse and let dry.
● Clean the Base by wiping it with a damp cloth. To avoid product
damage, do not immerse the Base into water or other liquids.
● To avoid damage to the product, do not use abrasive cleaners or
scouring pads to clean the product parts.
● Reassemble the product before placing it into storage. (Reference
the “To Assemble” section.)
● Store the product in a cool, dry place.
Electrical Specifications
Voltage Frequency Wattage
120 VAC 60 Hz 300W
06 07
