Costway GC332521 User manual

A
Pvc grip
B
Scorecard holder
C
Handle tube
D
Upper bag holder bracket
E
Adjustable handle mechanism
F
Main upper frame tube
G
Connecting rods
H
Leg bracket
I
Slippery connecting rods
J
2 holes leg frame
K
4 holes leg frame
L
Right weight stabilizer
L1
Left weight stabilizer
M
Right wheel locking mechanism
M1
Left wheel locking mechanism
N
Anti-splay wire
P
Main wheel
Q
Main lower frame tube
R
Lower bag holder bracket
S
Front wheel assembly
T
Umbrella holder base
U
Umbrella holder storage rack
V
Umbrella holder
W
Joint
X
Mesh bag
PARTS LIST
GC332521
MAINTENANCE
To clean to the cart, wipe with a soft, dry cloth. Car polish may be
used to maintain finish. Lubricate moving parts every 6 months.
Warning:
For your own safety, please read and understand these warnings and
keep this user guide for future reference.
Always make sure the cart is fully extended and locked before use.
Always make sure the cart is folded and locked properly before lifting or
transporting.
Do not run while using this product.
Do not use accessories other than those designed for use with this cart.
Keep all packing materials away from children and recycle where possible
or where required by law.
USE THE BRAKE
Fig.1
To put in use：
Simply attach the umbrella holder
onto the cart as in Fig. 2＆3.
To store：
Attach the umbrella holder to the storage
rack on the handle as in Fig. 4＆5.
Push on the brake pedal to stop
the rear wheel and pull off to
release as in Fig.1.
Fig.2
Fig.3
Fig.4
Fig.5
UMBRELLA HOLDER

Fig.6
UNFOLDING
FOLDING
Fig.14
Fig.8
Fig.9
Fig.10
Fig.15
Lift the upper
bag holder
bracket as Fig.6.
Fig.13
Button
Fig.12
Make sure the handle
height adjusting knob
is fully tighten , then
pull the handle and
upper bag bracket as
shown in Fig. 7 to
extend the cart.
As shown in Fig 8, press the
button and rotate the front wheel
180 degree clockwise so the
front wheel is at center of the
cart.
Press the button of lock
mechanism and insert the wheel
axle into the hole to assemble
rear wheel as Fig.9.
The cart is fully
extended as shown
in Fig. 10.
Press the button and rotate the
front wheel 180 degree
counterclockwise so the front
wheel is on the right of the front
wheel fork (when you stand
infront of the cart) as Fig11.
Make sure the handle height adjusting knob is fully tighten ,
slightly lift up the handle as Fig. 12 ,and then press the folding
button and push the handle downward as shown in Fig. 13.
Fold down the upper
bag holder bracket
as Fig.14.
The cart is fully
folded as Fig.15.
Handle
height
Fig.7
handle
height
Button
Fig.11
Button

Front Wheel Adjustment Mechanism
If the cart veers to the right:
Step 1: Face the front wheel of the cart and use the provided Allen wrench to loose
the two side screws as in Fig.B.
Step 2: Then use the Allen wrench to adjust the front bolt clockwise until the front
wheel is centered as in Fig.C. Then tighten the two side screws as in Fig.D.
If the cart veers to the left:
Step1: The same as above.
Step 2: Adjust the front bolt counterclockwise until the front wheel is centered as in
Fig.C. Then tighten the two side screws as in Fig.D.
Fig.C
Fig.D
Fig.A
Fig.B
Left
Right