Costway HU10063 User manual

Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP !
Contact Us !
Do NOT return this item.
Nightstand with Drawer
HU10063
USER’S MANUAL
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
US:[e-mail]
UK:[e-mail]
AU:[email protected]
US office: Fontana UK office: Ipswich AU office: Truganina

03
Before You Start
02
Read each step carefully before starting. It is very important
to ensure each step followed in correct order, otherwise
assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw
edges. Have a check to make sure all parts are included.
Work in a spacious area, preferably on a carpet close to
where the unit will be used.
Keep the handtools close at hand. Do not use power tools to
assemble your furniture. They may scratch or damage the
parts.
No. Part Qty
ATop 1
BBottom 1
CSide panel 2
DBottom apron 1
ESide apron bottom 2
FTop support 2
GDrawer face 1
HDrawer back 1
IDrawer side panel 2
Minifix
1
5
9
2
6
10
3
7
4
8
Wood dowel
M8 x 30mm
CSK Screw
M4 x 32 mm
CSK Screw
M3.5 x 16mm
CSK Screw
M4 x 25mm
Handle Handle screw
M4 x 18mm
Power nail 3/4
PVC nail leg Drawer slide
JDrawer bottom 1
KLeg 4
LSupport-drawer slide 2
MBack panel 1
20 sets
1 set
X4 X14 X8
X6
X4
X1 X2 X25

04 05
A
B
C
D E
F
G
H
I
J
K
L
M
3
4
6
1
1
3
8
3
8x
8
3
4
6
7
1-Assemble the drawer side panel and drawer back panel. Install
the bottom panel and attach the drawer slide at side panel. Then
assemble the drawer handle with screws.
2-Install the side apron bottom and bottom apron at the bottom
panel.
x8
x4
x1
x8
M4 x 32 mm
M3.5 x 16 mm
x2
x2
x6
M4 x 32 mm
7x2
M4 x 18 mm
10 x2
#A

06 07
1
1
2
5
4x
4
4x
16x
8x
4x
2
3-Install the leg on the side panel.
4-Install the support-drawer slide on the
side panel and connecting the top support
with support drawer slide.
5-Install the side panel on the bottom panel.
6-Install the top support on the top
panel, and install the top on the side
panel.
17x
8
5
9
4x
x16
x8
x4
1
1
5
10
x2
x2
x4
x4
x2
M4 x 25 mm
#B
1
9
x4
x4
1
5
8
x4
x2
x17
4M3.5 x 16 mm
M4 x 25 mm

Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary.
Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to the
finish.
Liquid spills should be removed immediately. Using a soft clean cloth, blot
the spill gently. Avoid rubbing.
Check bolts/screws periodically and tighten them if necessary.
It is best to keep your furniture in a climate-controlled environment.
Extreme temperature and humidity changes can cause fading, warping,
shrinking and splitting of wood.
It is advised to keep furniture away from direct sunlight as sun may
damage the finish.
Proper care and cleaning at home will extend the life of your purchase.
Following these important and helpful tips will enhance your furniture as it
ages.
Further advice about wood
furniture care
08 09
7-Put back the complete assembly
drawer in the cabinet.
Complete Assembly