
www.costway.com
Instructions for using the mirror:
1. Please handle with care! Edge damage can cause the glass to break
suddenly.
2. The mirror must be installed and debugged by a qualified professional
electrician. Avoid personal mistakes causing mirror damage or dumping
accidents.
3. Before installing the mirror, be sure to cut off the circuit power supply.
Different wall materials require different types of mounting parts. Please
select suitable screws according to your requirements to ensure safety.
4. The plug part should not be exposed to water or sprayed. If you cannot
guarantee it, you need to add a professional socket waterproof box to the
socket.
5. Touch the switch on the mirror to switch between white light, yellow
light and natural light. Long press to adjust the brightness.
The installation process is shown in the figure below:
1. First, drill holes on a solid wall with a suitable hole pitch.
2. Put the wall anchor into the pre-drilled hole, and twist the screw B to the
proper length.
3. Hang the mirror on the twisted screw B.
4. Finally connect the plug adapter D.
03