Costway HW61186 User manual

FLOOR AREA
2MX2M
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Visit us: www.costway.com
Follow Costway
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
Storage Cabinet
HW61186
ASSEMBLED BY 1 ADULT
EN DE FR ES IT

2
Contact Us!
Hardware inside
Do NOT return this item.
Contact our friendly customer service department for help first.
Before You Start
Read each step carefully before starting. It is very important to ensure each step followed in
correct order, otherwise assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all
parts are included.
Work in a spacious area, preferably on a carpet close to where the unit will be used.
Keep the handtools close at hand. Do not use power tools to assemble your furniture.
They may scratch or damage the parts.
3
product

4 5
Top Panel x 1
(30(w)cmx30(d)cm)
321 Left Side Panel x 1
(78.5(w)cmx28.4 (d)cm)
Right Side Panel x 1
(78.5(w)cmx28.4(d)cm)
Bottom Panel x 1
(28(w)cmx21.5(d)cm)
654 Fixed Shelf x 1
(28(w)cmx21.5(d)cm)
Adjustable Shelf x 1
(26(w)cmx21.2(d)cm)
Door x 1
(51.4(w)cmx21.3(d)cm)
87 Back Panel
(74.3w)cmx23.5 (d)cm)
2xwercSmm41
30mm Wooden Dowel x 12Female Camlock x 1235mm Male Camlock x 12
Handle x 110mm Screw x 9Hinge x 2
14mm Screw x 12
12mm Screw x 1Safety Strap x 1
Wall Plug x 1 Washer x 2
35mm Screw x 1
25mm Shelf Supports x 414mm Screw x 2
L
Magnetic Catch x 1 Catch Plate x 1
please contact us in time.

6 7
1
2
3
3
2
5
4
A
A
A
A
F
F
D
A
A
A
A
M
Q
N
A
A
A
A
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
Inserting Male Camlocks
1. Insert 12 x Male
Camlocks A into Panels 1
2 and 3 as shown.
2. Connect Magnetic Catch
D to Right Side Panel 3
as shown using 2 x Screw F.
The unit is floor
standing, but it is
recommended that the
unit is secured to the
wall.
3. To the underside of Top
Panel 1 , connect wall
strap M as shown using 1
x Washer Q and screw N
A1
23
D3
F
1
M
QN
1. Insert 8 x Dowels B
into the ends of Panels 4
and 5 as shown.
2. Locate Panels 4 and
5 onto Male Camlocks
in Panel 2 . Locate Male
Camlocks in Panel 3 into
adjacent holes in panels 4
and 5
3. Into the underside of
Panels 4 and 5 insert
8 x Female Camlocks
Use a screwdriver to turn
the Female Camlocks
Clockwise to lock
For more information refer
to the Using Camlocks
Section
C
4
5
4
5
2
3
4
5
45
B

8 9
1
8
B
B
K
C
C
C
4
1. Insert 4 x Dowels C into
the top edge of Side Panels
2 and 3 as shown
2. Locate Top Panel 1 into
positon as shown.
3. Insert 4 x Female
Camlocks B into Side
Panels 2 and 3. Use a
screwdriver to turn the
Female Camlocks
Clockwise to lock
For more information refer
to the Using Camlocks
Section
2
3
C
23
1
B
23
1. Locate Back Panel 8
into position. Ensure that
the wall strap pulls through
the gap shown.
2. Connect Back Panel 8
to the unit using 12 x
Screws K
8
8
K
6
7
I
HH
G
E
L
5
6
1. Insert 4 x Shelf
Supports L into internal
holes in Side Panels 2
and 3.
2. Locate Shelf 6 onto
Supports as shown 2
3
2
3
L
6
1. To door 7 , attach 1 x
Catch Plate E using 1 x
Screw H.
2. Connect 2 x Hinges G
as shown using 2 x Screw
H per Hinge
7
E
H
G
H

10 11
7
H
H
I
J
J
O
P
M
Q
7
8
2
1. Connect Handle I to
the Door using
2 x Screws J
2. Connect the Door to the
unit by attaching the
hinges to Side Panel 2
as shown using 2 x Screw
H per Hinge
I
J
2
H
The unit is floor
standing, but it is
recommended that the
unit is secured to the
wall.
1. Move the unit into
desired position.
2. Mark the location of the
fixing holes on the wall
with a scribe.
3. Drill hole and insert 1 x
wall plug D
4. Secure the strap to the
wall using 1 x Washer Q
and 1 x Screw O
Note: To hide the strap
behind the unit, drill the
holes lower than the top of
the unit
Warning:
Before driling,check
wall for hidden pipes
and cables.
P
Q
Assembly Complete
O
If you need help or have damaged or missing parts, please contact us in time.
please contact us in time.