Costway JH10003 User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
EN
DE
FR
ES
IT
PL
With your inspiring rating, COSTWAY will be more consistent to offer you EASY
SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
Mit Ihrer inspirierenden Bewertung wird COSTWAY konsistenter sein, um Ihnen EIN
SCHÖNES EINKAUFSERLEBNIS, GUTE PRODUKTE und EFFIZIENTEN SERVICE zu
bieten!
Avec votre évaluation inspirante, COSTWAY continuera à fournir une EXPÉRIENCE
D’ACHAT PRATIQUE, des PRODUITS DE QUALITÉ et un SERVICE EFFICACE !
Con su calificación inspiradora, COSTWAY será más consistente para ofrecerle
EXPERIENCIA DE COMPRA FÁCIL, BUENOS PRODUCTOS y SERVICIO EFICIENTE.
Con la tua valutazione incoraggiante, COSTWAY sarà più coerente per offrirti
ESPERIENZA DI ACQUISTO FACILE, BUONI PRODOTTI e SERVIZIO EFFICIENTE!
Dzięki twojej opinii COSTWAY będzie mógł oferować jeszcze WYGODNIEJSZE
ZAKUPY, LEPSZE PRODUKTY i SPRAWNIEJSZĄ OBSŁUGĘ KLIENTA.
Toilet Wheelchair
JH10003
USER’S MANUAL
US office: Fontana UK office: Ipswich AU office: Truganina
DE office: Hamburg FR office: Saint Vigor d'Ymonville PL office: Gdańsk

02 03
Parts List Before Assembly
Assembly Instruction
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1. Right armrest
2. PVC seat plate
3. Plastic seat plate
4. Right foot frame
5. M6 knob
6. Footrest
7. Left foot frame
8. Backrest frame
9. Backrest cushion
10. Left armrest
11. M8 triangle knob
12. Drum
13. Wheelchair frame
14. C-shaped buckle
15. 5” medical silent wheel
When you unpack the box, please take care to protect all the parts in
the box. If you assemble on the ground, put paper or carpet on the
ground to prevent scratches. Pay attention to distinguish the parts and
place them first. There are accessories in bulk in the box as shown in
the figure below.
Step 1: As shown in Figure
1, first take out the
C-shaped buckle on the
frame, and then align the 5”
medical silent wheel with the
tube of the frame, align the
corresponding holes, and
use the C-shaped buckle to
lock the four wheels. The
height is adjusted to the
same. Figure 1

04 05
Step 2: As shown
in Figure 2, align the
drum with the
plastic slot under
the plastic seat
plate.
Step 3: As shown in
Figure 3, align the
backrest cannula at the
same time with the two
nozzles of the frame and
press it down firmly, and
then tighten the M8
triangle knob to lock it.
Step 4: As shown in
Figure 4, align the left
foot frame with the hole
of the upper tube of the
wheelchair and press
down.
Figure 2
Figure 3
Figure 4
Step 5: As shown in
Figure 5, hold the tube
frame and rotate the
left foot frame until the
inner pin is locked in
place.
Step 6: As shown in
Figure 6, align the right
foot frame with the hole
of the upper tube of the
wheelchair and press
down.
Step 7: As shown in
Figure 7, hold the tube
frame and rotate the
right foot frame until the
inner pin is locked in
place. Then install the
seat plate on the plastic
seat plate.
Figure 6
Figure 7
Figure 5

06 07
Check After Installation
Component Instruction
1. Whether the toilet wheelchair is installed correctly, please refer to
the manual for comparison.
2. Verify that all the accessories are fully assembled, and you can
check for extra accessories.
3. Check if there is any looseness in the installation. If there is any
looseness, install it properly.
4. Check the appearance of all components for skew, and make
appropriate adjustments.
1. As shown in Figure A1, there is
no brake. If you need to brake,
press the red switch firmly!
2. As shown in Figure A2, it is in
the braking state. If you need to
release the brake, press the black
switch of the wheel firmly, and the
red switch will pop up.
3. As shown in Figure A3 and A4,
to adjust the height of the footrest,
loosen the knob, remove the
screw, and adjust the tube to the
desired position. Then tighten the
screw and tighten the knob firmly.
A1 A2
A3 A4
Warning
Maintenance
1. Before use, make sure to step on the brake!
2. Before each use, check whether the backrest, footrest, and seat plate
are secure!
3. Before use, make sure that the height of the 4 wheels are the same,
so do the 2 footrests!
4. When using the toilet wheelchair, the footrest must be folded first.
After sitting up, fold the footrests down again. If you don't fold it, there is
a danger of tripping and injury!
5. When using the toilet wheelchair, people can’t stand on the footrest,
otherwise there will be a danger of falling and injury!
7. The maximum load is 300 lbs (136 kg)! Cannot be used overweight!
8. If you find any damage to the toilet wheelchair, please contact our
customer service!
9. Don't lean on the armrest! Otherwise there is a danger of falling!
10. Do not stand on the toilet wheelchair, and do not let unattended
children use it! Prevent injuries!
1. Do not scratch or scrape the surface of the product with hard objects
to prevent damage to the material.
2. For daily cleaning and maintenance, apply neutral synthetic detergent,
wipe with a damp cloth, and then wipe with a dry cloth.
3. Do not contact with strong acids and alkalis to prevent corrosion.
Storage Conditions and Methods
After packaging, the toilet wheelchair should be stored at a temperature
not exceeding 14OF to 104OF (-10OC~ 40OC), and a relative humidity not
exceeding 80%. Store it in a clean, non-corrosive gas, well-ventilated
room. Keep it away from moisture, sunlight, and heat sources during
transportation.