Cotell FG1088-A1DSP User manual

FG1088-A(1D)SP
Hospitality Telephones
User Guide
Fuego1000™ SmartStation™
Desktop Telephone
FG1088-A (1D) SP

FG1088-A(1D)SP
FG1088-A(1D)SP Face Drawing
Features
1-line
Analog
Surface mount technology with CPU
control
Full length customizable faceplate
Message waiting indicator lamp
1-10 programmable memory button
High immunity to electro-magnetic
radiation
Gloss or Matt finished with high quality
plastic casing
Magnetic hook-switch
16 digit LCD
Adjustable flash-hook timer
Handset & speaker volume control
Ringer volume control
Redial, hold, mute & flash
Caller ID (FSK or DTMF)
Data port
Small footprint

FG1088-A(1D)SP
Installation
1. Unpack the box and check for the following items:
a. Main telephone body
b. Base support unit
c. Handset
d. Handset cord
e. Line cord
2. Carefully use the screws provided to fasten the base support unit to the main
telephone body.
3. Connect the handset to the telephone using the coiled handset cord provided.
4. Connect one end of the line cord to the telephone RJ11 socket and the other end
to the wall telephone outlet.
5. Install the faceplate (delivered separately) onto the telephone.
Operation
A. Initiating a Call
Using the handset
1. Lift the handset.
2. Listen to dial tone.
3. Press the desired number on the keypad or press a memory button for autodial.
4. To cut off the call temporarily to make another call, press the flash button.
5. To end the call, place the handset back on the cradle.
Using speakerphone
1. Press speaker button. The red LED indicates that the speaker is active.
2. Listen to dial tone
3. Press the desired number on the keypad or press a memory button for autodial.
4. To cut off the call temporarily to make another call, press the flash button.
5. To end the call, press the speakerphone button again. The LED will goes off.
B. Answering a Call
An audible ringing sound and the flashing LED indicates and incoming call
Using the handset
1. Lift up the handset to answer the call.
2. To end the call, place the handset back on the cradle.
Using speakerphone
1. Press the speakerphone button to answer the call.
2. To end the call, press the speakerphone button again. The LED will turn off.

FG1088-A(1D)SP
C. Redial
Using the handset
1. Lift up the handset, press the REDIAL button to initial a redial call
2. To end the call, place the handset back on the cradle.
Using the speakerphone
1. Press the speakerphone button. The red LED indicates the speakerphone is active,
press the REDIAL button to initial a redial call
2. To end the call, press the speakerphone again. The LED will turn off.
D. Speakerphone Volume
1. Adjust the Vol+ or Vol- button to increase or decrease the speakerphone volume.
E. Ringer Volume
1. Flip the Hi-Lo switch below the telephone body to increase or decrease the ring
volume.
F. Flash
1. Press the FLASH button momentarily will enable a call transfer.
2. Press the FLASH button for a longer period of time will reactivate a dial tone to
make another call.
G. Hold
1. During conversation, press the HOLD button will place a call on hold. The opposite
party will hear music.
2. To deactivate the call on hold, press the HOLD button again.
H. Mute
1. During conversation, press the MUTE button will disable the opposite party from
hearing your conversation
2. To deactivate Mute, press the MUTE button again.
I. Programmable Memory Button
FG1088-A (1D) SP has up to 10 programmable memory buttons. These buttons can
be used to store commonly dial numbers or codes for activating PABX features.
Storing a number or a code
1. Off hook
2. Press SET/STORE key
3. Press desired numbers
4. Press desired memory key (M1~M10)

FG1088-A(1D)SP
J. Message Retrieval
FG1088A (1D) SP requires 1 of the 10 memory button to be reserved for message
retrieval button. The mail box number will be programmed into this memory location
“Message” or “MSG”.
When there is an incoming message, the message indicator will light up.
Retrieve a message using the handset
1. Lift up the handset; press the “Message” or “MSG” button to retrieve the message.
2. Once completed, place the handset back on the cradle
Retrieve a message using the speakerphone
1. Press the speakerphone button, the red LED indicates that the speakerphone is
active. Press the “Message” or “MSG” button to retrieve the message.
2. Once completed, press the speakerphone again. The red LED will turn off.
K. Time Setting
Fig 1
To set hour, minute & Second
1. On hook
2. Press STORE key
3. LCD show “01234” (see below picture 1)
4. Press 0
5. LCD show, hour, minute, second (see below fig 2)
6. Press the desired time
7. Press STORE key again
M
D
IN
OUT
TUE
WED
THU
FRI
SAT
MAIL
MON
SUN
REP
NEW
锁

FG1088-A(1D)SP
Fig 2
To set Year, month, the procedure is the same (see below fig 3)
Fig 3
L. Outgoing Prefix Setting
1. Continue to press SET/DEL several times until the LCD indicator shows ”PRE
CODE---” flickers. Press PAGE UP or PAGE DOWN to select outgoing prefix
number, press SET/DEL to confirm.
M.Incoming Call record erasure
1. Lift up the handset, press PAGE UP or PAGE DOWN to check the incoming call
records. Press SET/DEL to delete the selected telephone number. By pressing
SET/DEL continuously for 3 seconds will delete all the incoming call records.
N. Dialed Number Record Erasure
1. Lift up the handset, press REDIAL to check the dialed number record, press
SET/DEL to delete the selected telephone number. By pressing SET/DEL
continuously for 3 seconds will delete all the dialed number records.
M
D
IN
OUT
TUE
WED
THU
FRI
SAT
MAIL
MON
SUN
16
REP
NEW
锁
M
D
IN
OUT
TUE
WED
THU
FRI
SAT
MAIL
MON
SUN
16
REP
NEW
锁

FG1088-A(1D)SP
O. Flash Timer Setting
1）To set flash time 100ms
a. Off hook
b. Press * # * 100 FLASH
c. The flash time is set to be 100ms
To set 1000ms or 300ms, the procedure is the same except to change the timer value
accordingly

FG1088-A(1D)SP
IMPORTANT SAFETY INSTRUCTIONS
WHEN USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS.
INCLUDING THE FOLLOWING:
1. READ AND UNDERSTAND ALL INSTRUCTIONS IN THIS MANUAL.
2. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE PRODUCT.
3. UNPLUG THE PRODUCT FROM THE WALL OUTLET BEFORE CLEANING. DO NOT USE LIQUID
CLEANER OR AEROSOL CLEANERS. USE A DAMP CLOTH FOR CLEANING.
4. DO NOT USE THIS PRODUCT NEAR WATER FOR EXAMPLE NEAR A BATHTUB, WASH BOWL,
KITCHEN SINK OR LAUNDRY TUB, IN A WET BASEMENT, OR NEAR A SWIMMING POOL.
5. DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND OR TABLE. THE PRODUCT MAY
FALL, CAUSING SERIOUS DAMAGE TO THE PRODUCT.
6. SLOTS AND OPENINGS IN THE CABINET AND THE BACK OF BOTTOM ARE PROVIDED FOR
VENTILATION, TO PROTECT IT FROM OVERHEATING, THESE OPENINGS MUST NOT BE BLOCKED
OR COVERED. THE OPENINGS SHOULD NEVER BE BLOCKED BY PLACING THE PRODUCT ON
THE BED, SOFA, RUG OR ANY OTHER SIMILAR SURFACE. THIS PRODUCT SHOULD NEVER BE
PLACED NEAR OR OVER A RADIATOR OR HEAT REGISTER. THIS PRODUCT SHOULD NOT BE
PLACED IN A BUILT-IN INSTALLATION UNLESS PROPER VENTILATION IS PROVIDED.
7. NEVER PUSH OBJECTS OF ANY KIND INTO THIS PRODUCT THROUGH CABINET SLOTS AS THEY
MAY TOUCH DANGEROUS VOLTAGE POINTS OR SHORT OUT PARTS THAT COULD RESULT IN A
RISK OF FIRE OR ELECTRIC SHOCK. NEVER SPILL LIQUID OF ANY KIND ON THE PRODUCT.
8. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT DISASSEMBLE THIS PRODUCT, BUT TAKE IT
TO A QUALIFIED SERVICEMEN WHEN SOME SERVICE OR REPAIR WORK IS REQUIRED. OPENING
OR REMOVING COVERS MAY EXPOSE YOU TO DANGEROUS VOLTAGES OR OTHER RISKS.
INCORRECT REASSEMBLE CAN CAUSE ELECTRIC SHOCK WHEN THE APPLIANCE IS
SUBSEQUENTLY USED.
9. UNPLUG THIS PRODUCT FROM THE WALL OUTLET AND REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL UNDER THE FOLLOWINGCONDITIONS:
- WHEN THE POWER SUPPLY CORD OR PLUG IS DAMAGED OR FRAYED
- LIQUID HAS BEEN SPILLED INTO THE PRODUCT.
- IF THE PRODUCT HAS BEEN EXPOSED TO RAIN OR WATER.
10. IF THE PRODUCT DOES NOT OPERATE NORMALLY BY FOLLOWING THE OPERATING
INSTRUCTIONS. ADJUST ONLY THOSE CONTROLS THAT ARE COVERED BY THE OPERATING
INSTRUCTIONS BECAUSE IMPROPER ADJUSTMENT OF OTHER CONTROLS MAY RESULT IN
DAMAGE AND WILL OFTEN REQUIRE EXTENSIVE WORK BY A QUALIFIED TECHNICIAN TO
RESTORE THE PRODUCT TO NORMAL OPERATION.
- IF THE PRODUCT HAS BEEN DROPPED OR THE CABINET HAS BEEN DAMAGED.
- THE PRODUCT EXHIBIT A DISTINCT CHANGE IN PERFORMANCE.
11. AVOID USING A TELEPHONE (OTHER THAN A CORDLESS TYPE) DURING AN ELECTRICAL STORM.
THERE MAY BE A REMOTE RISK OF ELECTRIC SHOCK FROM LIGHTING.
12. DO NOT USE THE TELEPHONE TO REPORT A GAS LEAK IN THE VICINITY OF THE LEAK.SAVE
THESE INSTRUCTIONS

FG1088-A(1D)SP
WARRANTY EXCLUSIONS
This warranty does not cover, or may be voided by the followings:
1. Any damage resulting from abuse or misuse (i.e. liquid spills, abuse, or customer’s
modification ( warranty label broken) of the telephone.
2. Any damage caused by failure to follow operating or installation instructions provided with
the telephone.
3. New faceplates or damage to the faceplate or discoloration of the telephone.
4. Any damage resulting from improper connection of the telephone to other equipment.
5. A telephone used in a harsh or corrosive environment.
6. Incompatibility with anything other than the PBX for which the telephone was intended
during purchased.
7. Cords, connectors and replaceable batteries.
8. Force majeure.
9. Damages in transit.
10. Any damage resulting from unauthorized modification or repair of the telephone.
COTELL PRODUCT SUPPORT
If you need technical assistance with this product, please contact COTELL INTERNATIONAL
LIMITED via one of the following methods:
Telephone : [phone]
Fax : [phone]
Email :: Sale[email protected]
Website : www.cotell.cn
Please contact us should the above operating instructions do not match the actual telephone.