Country Living D71 M80758 User manual

OWNER’S
MANUAL
Date of purchase: _____/ _____/ _____
Ashmore 5 Piece
Gathering Set
Product code: D71 M80758
UPC code: 7-6945575818-7
1
Vendor Item: AS-J-252-3YT

2
PARTS
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
A (1)
Table Rim (16 Bolts and
16 Metal Washers attached)
B (1)
Metal Center Ring
ACCESSORIES
Ed (1)
Assembly
Instructions Sheet
Ec (1)
Allen Wrench
C (4)
Metal Leg (1 Bolt and1 Metal
Washers attached each leg)
D (4)
Tile
Ea (1 spare)
Bolt
Eb (1 spare)
Metal Washer
Ee (32 + 3 spares)
Tile pad

3
CARE INSTRUCTIONS
Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents.
Cover furniture with outdoor furniture covers when not in use.
Made in CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
For questions or comments about product:
Call toll-free:
800-457-4652
Please refer to part numbers when reordering
sears.com
ASSEMBLY INSTRUCTIONS
1Place the table rim (A) upside on a flat surface.
Insert the pin of the metal leg (C) into the hole of
metal center ring (B) by inserting a bolt (Ea) through
a metal washer (Eb), through metal center ring (B) and
secure into the metal leg (C). See Fig. 1. Don’t tighten
completely. Repeat procedure for the other three legs.
2Attach the assembled metal center and metal legs to
the table rim (A). Align the holes in the metal leg with
the holes in the table rim. For each hole, insert a
bolt (Ea) through a metal washer (Eb), through metal
leg (C) and secure into the table rim (A). See Fig. 2.
Don’t tighten completely. Repeat procedure for the
other three legs.
Your table is ready for use.
3Securely tighten all bolts diagonally by using
Allen wrench (Ec). Turn the table over. Evenly
attach two tile pads (Ee) to each side in the
table rim (A). Place the tiles (D) onto the table
rim. Level the table by adjusting leg feet up and
down as desired. See Fig. 3.
Fig. 1
Fig. 2
Fig. 3
C
B
Ea
Eb
C
B
A
C
Ea
Eb
Ea
Eb
A
D
A
Ee