Country Living Seneca User manual

OWNER’S
MANUAL
Date of purchase: _____/ _____/ _____
Seneca 7 Piece
Dining Set
Product code: D71 M80225
UPC code: 7-6945575492-9
1
Vendor Item: AS-J-252-1T

2
PARTS
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
A (1)
Table Rim (12 Bolts and 12
Metal Washers attached)
B (4)
Metal Leg
ACCESSORIES
Dd (1)
Assembly
Instructions Sheet
Dc (1)
Allen Wrench
C (4)
Tile
Da (1 spare)
Bolt
Db (1 spare)
Metal Washer

3
CARE INSTRUCTIONS
Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents.
Cover furniture with outdoor furniture covers when not in use.
Made in CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
For questions or comments about product:
Call toll-free:
800-457-4652
Please refer to part numbers when reordering
sears.com
ASSEMBLY INSTRUCTIONS
1Place the table rim (A) upside on a flat surface.
Remove all bolts (Da) and metal washers (Db) that
are attached to the table rim. Attach a leg to the
table rim (A), align the holes in the bracket of the
metal leg (B) with the holes in the table rim (A).
For each hole, insert a short bolt (Da) through a
metal washer (Db), through the bracket of the metal
leg (B) and secure into the table rim (A). See Fig. 1.
Don’t tighten completely. Repeat procedure for the
other three legs.
2
Your table is ready for use.
Turn the table over. Securely tighten all bolts
diagonally by using Allen wrench (Dc). Place the
tiles (C) onto the table rim. Level the table by
adjusting leg feet up and down as desired.
See Fig. 2.
B
Db
A
Da
A
B
Fig. 1
C
Fig. 2