
Micro+Smokerlyzer®
QuickStart Guide
5
© Copyright 2014 coVita LLC All Rights Reserved v070614
3
30 Washington Ave Ste D Haddonfield, NJ 08033
tel (800)707-5751 ●fax (800)721-2377 ●info@covita.net ●www.covita.net
C. Operating Instructions
1. Press and hold the ON/OFF button until the display becomes
active. Release the button.
2. Insert the D-Piece into the monitor.
3. Place a mouthpiece into the D-Piece.
4. Start breath test | inhale and touch the icon.(User should
hold their breath for 15 seconds)
5. After the beep, blow slowly into the mouthpiece, aiming to
emptythe lungs completely.
6. Monitor’s display will change colors and sounder will emit sound
based on reading.
7. The carbon monoxide parts per million (ppm) and percentage
carboxyhaemoglobin(%COHb) - CO inthe blood, will be
displayed on the screen. For expectant mothers, touch fetus
icon to provide the %FCOHb conversion.
8. Reading will appear onscreen until you touchanother icon.
9. To repeat the breath test, follow the steps above.
10.To switchthe monitor off, press and hold the ON/OFF button for
three seconds. The monitor will power off after ten minutes of
inactivity.
D. Typical Smoking Ranges
0 - 6 PPM | Non-Smoker Range
.
7-19 PPM | Light Smoking Range
oTypically observed when smoking under a pack of
cigarettes a day.
.
20+ PPM | Heavy Smoking Range
oTypically observed when smoking over a pack of
cigarettes a day.
NEVER USE cleansing products containing alcoholor other cleaning agents or
solvents around your monitor. Bedfont offers alcohol-free cleansing wipes which
are specifically engineered for use on Bedfont monitors and accessories.
Effective against 99.999% of Germs, Spores, Bacteria, and Fungi. Tested
against H5N1 Avian Flu and H1N1 Swine Flu. Additionally, Bedfont offers a
hand sanitizer which was designed to safely and gently cleanse your hands.
Because it’s engineered to be alcohol-free, it won't interfere with your monitor's
sensor or accessories. Kills 99.99% of germs, bacteria, & fungi without drying
your skin.