Cozzia 7100 Manual

Maintenance service manual
Model: 7100

6: Guidance of change the inflator pump box.
A: Locate the zipper head at the back of the chair. Unzip it to the end. Then we can find inflator
pump box on the left side of the backrest frame.
B: Detach canvas we can find two metal bolts. Pull these two bolts up and we can fold the backrest frame.
(As pictures below show.)
C: Detach the lower part of backrest frame canvas and we can find 2pcs screws which secure the elastic
strip. Slacken and remove these two screws. (As pictures bellowing show.)
Locate the inflator pump box.
Locate the two metal bolts.
Backrest frame has been folded.
Locate the 2pcs screws.
The elastic strip has been released.
Locate the
zipper head.

D: Slacken and remove the 4pcs screws which secure the inflator pump box first. Then disconnect the
wire connecter and air hose connecter. Now we can detach the inflator pump box. ( As pictures
bellowing show.)
E: Turn over the inflator pump box we can find 4pcs screws. Slacken and remove these 4pcs screws then
we can open the box. Then we can repair it. ( As pictures bellowing show.)
Locate the 4pcs screws.
Locate the wire connecter
and air hose connecter.
The inflator pump box has
been detached.