9
Select any auto program and press the OK button.
The chair will automatically begin scanning your
body, mapping your back, shoulders, and neck.
During this process it is important to remain
seated back into the chair without lifting your
head.
The scan can be viewed on the remote control
screen. If ne tuning is needed just after your
body scan, wait for the shoulder adjust prompt
to appear and then use the Up or Down arrow
buttons to move the massage rollers up or down
for the perfect shoulder kneading position.
TrueFit™ Body Scanning
To easily exit the chair at any time, press the ON/OFF power button on the remote control to
restore the chair to the upright position.
WARNING! Check to make sure children and pets are clear of chair before pressing on/o
button to return chair to upright position. See next page for detailed hazard warnings.
Getting out of the Chair
If you nd that you need to adjust your shoulder
height position after leaving the shoulder adjust
screen, simply use the left and right arrows when
in the in-use screen to navigate to shoulder
position. Press OK to select. Once selected you
will be taken back to the Shoulder adjust screen
where you can use the up and down arrows to ne
tune your shoulder position.
Re-adjust Shoulder Position
Shoulder Position
Shoulder Position
Total Body
