Craftsman CMXPTSG1006NB User manual

1/4 in. Angle Die Grinder
Amoladora de troqueles en ángulo de 1/4 pulg.
Meuleuse angulaire à rectifier les matrices de
1/4 po
CMXPTSG1006NB
INSTRUCTIONMANUAL | GUIDE D’UTILISATION | MANUAL DE INSTRUCCIONES
IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.
POUR TOUTE QUESTION OU TOUT COMMENTAIRE, NOUS CONTACTER.
SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS.
1-888-331-4569 WWW.CRAFTSMAN.COM

1
ENGLISH
Components
11/4 In. Angle Die Grinder
2 Collet Jacket
3Spindle
4Trigger
5Safety Lever
6Spindle Lock
7Collet
8Air Inlet
9Wrench
Fig. A
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to
hazardous situations and your risk of personal injury or property damage.
DANGER:Indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING:Indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION:Indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury.
NOTICE:Indicates a practice not related to personal injury which, if not avoided, may
result in property damage.
(Used without word) Indicates a safety relatedmessage.
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
WARNING: Never modify the product or any
part of it. Damage or personal injury could result.
WARNING:To reduce the risk ofinjury,read the
instruction manual.
If you have any questions or comments about
this or any product, call CRAFTSMAN toll free
at: 1-888-331-4569.
1
3
6
25
7
4
8
9

Specifications
ModelCMXPTSG1006NB
Collet 1/4" (6.35 mm)
Free Speed 21,000 rpm
Average Air Consumption 4.5 scfm
Air Inlet 1/4" npt
Air Hose 3/8" (9.53 mm)
Working Pressure 90 psi
1/4 in. Angle Die Grinder
2
ENGLISH
WARNING:Failure to observe and follow safety instructions could result in injury or death.
WARNING:Improper operation or maintenance of this tool could result in serious injury
and property damage. Read and understand all warnings and operation instructions before
using this tool. When using any tool, basic safety precautions should always be followed to
reduce the risk of personal injury. Anticipate and be alert for sudden changes in motion
during startup and operation of any power tool. Do not operate tool if trigger does not turn
the tool on or off. Do not use this tool at heights exceeding 6 feet (2m). Use each tool for its
intended function only. Do not use this product in unsafe work conditions. It is always
recommended to keep a fire extinguisher and first aid kit near work areas.
WARNING:User must also read the compressor manual and follow all compressor safety
instructions.
CMXPTSG1006NB
Compressor requirements
IMPORTANT: To operate correctly, this tool requires airflow that is at least 4.5 cubic feet per
minute (SCFM) at 90 pounds per square inch (PSI). Check the specifications of your air
compressor to be sure that it can support both the minimum SCFM and PSI required. The air
hose length could affect how much air pressure the tool is actually receiving. You may need to
adjust the air pressure higher on the air regulator to achieve the working pressure of 90 PSI.
™
4.5 SCFM @ 90 PSI
Tool Requirements
Exigences relatives aux outils
Requisitos de herramientas

What can happen How to prevent it
This air powered tool is capable of propelling materials
such as fasteners, metal chips, and other debris at high
speed which could result in serious injury.
Always wear ANSI approved Z87.1 safety glasses.
Never leave operating tool unattended.
Disconnect tool from air supply when tool is not in use or
when changing accessories to prevent accidental operation.
Compressed air can be hazardous, propelling objects or
particles that can cause injury into soft tissues such as eyes
and ears.
For additional protection, use an approved face shield in
addition to safety glasses.
Tool attachments can become loose or break and fly apart,
becoming projectiles or propelling other objects at the
operator or bystanders in the work area.
Do not use accessories with excessive wear. Make sure the
attachment is securely fitted before operating tool.
3
ENGLISH
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
What can happen How to prevent it
This tool is capable of generating sparks, which can result
in ignition of flammable materials. Never operate tools near flammable substances such as gasoline, naphtha, cleaning solvents, etc.
Work in a clean, well-ventilated area free of combustible
materials.
Never use oxygen, carbon dioxide or other bottled gases as
a power source for air tools.
What can happen How to prevent it
Exposure to noise produced by air tools can lead to
permanent hearing loss. Always wear ANSI S3.19 hearing protection.
RISK OF EYE OR HEAD INJURY
WARNING
WARNING
WARNING RISK OF FIRE OR EXPLOSION
RISK OF LOSS OF HEARING

4
ENGLISH
What can happen How to prevent it
This tool is not provided with an insulated gripping
surface. Contact with a “live” wire will also make exposed
metal parts of the tool “live” and can result in electrical
shock, electrocution or death.
Never use air tools where they may come in contact with
energized electrical wiring.
Air tool accessories that come into contact with hidden
electrical wiring could cause electrocution or death. Thoroughly investigate workpieces and work areas for possible hidden wiring before performing work.
What can happen How to prevent it
Loose hair, clothing, jewelry or other loose objects can
become entangled in the moving elements of this tool and
can cause serious injury.
Do not wear loose clothing, jewelry, or anything that may
get caught or tangled when using tool.
Remove any jewelry which may be caught by the tool.
Always keep hands and body parts away from moving
parts.
Always wear properly fitted clothing and other properly
fitted safety equipment when using this tool.
What can happen How to prevent it
This tool is capable of causing serious injury if operated
improperly, or in a manner for which the tool is not
intended.
Accessories can become extremely hot through friction
where they contact the workpiece. Make sure hands are kept away from accessories during tool use.
Keep the working part of the tool away from hands and
body.
Understand the tool’s limitations.
Read and understand instruction manual.
WARNING
WARNING
WARNING RISK OF ELECTRIC SHOCK
RISK OF ENTANGLEMENT
RISK OF CUTS OR BURNS OR HAND ENTRAPMENT

5
ENGLISH
What can happen How to prevent it
A tool left unattended or with the air hose attached can be
activated by unauthorized persons leading to their injury
or injury to others.
Remove air hose when the tool is not in use and store tool
in a secure location away from reach of children and
untrained users.
Air tools can propel materials throughout the work area. Use only parts and accessories recommended by the
manufacturer.
Keep work area clean and free of clutter.
Do not allow children to operate tool, and keep children
away from the work area.
Keep work area well lit.
Securely fit the attachment to the angle die grinder.
Inspect that the accessory is tight prior to use. Missing or
damaged items should be replaced before use.
Keep bystanders a safe distance away from work area.
Anyone entering the work area must wear personal
protective equipment.
Fragments of workpiece or of a broken accessory may fly
away and cause injury beyond immediate area of
operation.
Air tools can become activated by accident during
maintenance or tool changes. Disconnect the tool from the air supply during accessory changes, tool changes, maintenance or repair.
Never carry the tool by the air hose.
To avoid unintentional operation, never carry the tool with
the trigger depressed or engaged.
Only an authorized service representative should service
the tool.
Loss of control of the tool can lead to operator injury or
injury to others in the work area. Before changing accessories, making repairs, or when tool is not in use, shut off the air supply and release/drain air
pressure from hose.
Disconnect tool from air supply and store in a safe location.
Never use the tool while using medications, drugs or
alcohol.
Air tools can cause the workpiece to move upon contact,
leading to injury. Always make sure the workpiece is secure. Use clamps or other devices to prevent movement.
WARNING RISK OF PERSONAL INJURY

6
ENGLISH
There is a risk of bursting if the tool is damaged. Follow lubrication instructions for best and safest
operation.
Follow instructions on how to properly change accessories.
Poor quality, improper or damaged attachments can
detach or fly apart during operation, sending projectiles
through the work area and causing serious injury.
Always use tool attachments rated for the speed of the
power tool.
Never use tools, which have been dropped, impacted, or
are damaged.
Do not apply excessive force to the tool; let the tool
perform the work.
Never use a tool that is leaking air, has missing or
damaged parts, or requires repairs.
Always follow assembly, operation, maintenance
instructions.
Improperly maintained tools and accessories can cause
serious injury. Do not use damaged, frayed or deteriorated air hoses and/or fittings.
Maintain the tool and accessories with care.
Keep tools clean and properly oiled for best and safest
performance.
Do not lubricate tools with flammable or volatile liquids
such as kerosene, diesel or jet fuel.
Repetitive motions, awkward positions and exposure to
vibration can be harmful to hands and arms. Discontinue use of tool if discomfort, tingling feeling or pain occurs.
Consult a physician before resuming use if any of these
symptoms occur.
Using an accessory not intended for a specific tool
increases the risk of injury to the operator and everyone
else in the work area.
Always use accessories and attachments designed for the
tool and the work at hand.
Do not improvise or modify tools or accessories.
Loss of control of the tool can lead to operator injury or
injury to others in the work area. Keep proper footing at all times when handling tools. Slipping, tripping falling or over reaching are major
causes of serious injury and/or death.
Keep tool handles dry, clean and free from oil/grease.
Stay alert. Use common sense. Do not operate tools when
you are tired.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are
missing, call 1-888-331-4569 for a free replacement.
Do not remove any labels – replace any damaged label.

7
ENGLISH
NOTICE:Use threaded sealant tape (not
included) on the threading of the male
plug.
PREPARATION
ASSEMBLY
Estimated Assembly Time: 1 – 3 minutes
Before beginning the assembly of the product, make sure all parts are present. Compare parts
with package contents list. If any part is missing or damaged, do not attempt to assemble the
product.
Tools Required for Assembly (not included):
•9/16 in. (14 mm) or adjustable wrench
1. Remove plastic air inlet protective cap
from air inlet .
8
2. Tighten male plug (not included),
turning clockwise with a wrench (not
included) for air tight connection.
DO NOT OVERTIGHTEN.
3. Place 2 – 3 drops of air tool oil (not
included) into the opening of the male
air plug before each use.
8

8
ENGLISH
5. Insert a 1/4 in. shank accessory (not
included) into the collet . Tighten
the collet by depressing the Spindle
Lock and placing the wrench
on the flats of the collet and turning it
clockwise. Make sure the 1/4 in. shank
accessory is installed securely and
tightly.
7
7
6 9
4. Loosen the collet by depressing the
Spindle Lock and placing the
wrench on the flats of the collet and
turning it counterclockwise.
7
9
6
WARNING:Only use accessories
that have an RPM rating equal to or
greater than the tool itself. Also
make sure any accessory is
compatible with the collet opening.
Before using tool, always make sure
attachments are properly
mounted/secured. If attachments
are not properly mounted/secured,
they can present a serious hazard
and may cause bodily injury for the
operator or anyone in or around the
work area. Always follow the
attachment manufacturer's
specifications for properly attaching
accessories to tool.
7
9
6
2
7
PUSH
9
6
2
PUSH

9
ENGLISH
NOTICE:Working pressure is the amount
of air pressure the tool sees when
operating.
OPERATING
6. Connect the air hose to the male plug.
Set the working pressure at 90 PSI for
best tool performance.
1. Push safety lever forward and press
down on the trigger to start the
tool .
5
4
1
1
4
5