Craftsman 917.293490 User manual

Owner's Manual
JCRAFTSMAWJ
7.0 HP
19 INCH TINE WIDTH
REAR TINE WITH
DUAL ROTATING TINES
TILLER
Model No.
917.293490
Safety
Assembly /_
•Operation /
•Maintenance _/_ °
•Espanol / __
•Repair Parts __'_ i,_
This product has a low emission engine which operates
differently from previously built engines. Before you start the
engine, read and understand this Owner's Manual.
CAUTION:
Read and follow all Safety
Rules and Instructions before
operating this equipment,
Seam, Roebuck and Co., Hoffman Estates, II 60179
Visit our Craftsman website:www.sears.com/craftsman

Warranty ............................................... 2
Safety Rules ......................................... 2
Product Specifications .......................... 4
Assembly .............................................. 5
Operation .............................................. 8
Maintenance ....................................... 14
Maintenance Schedule...................... 14
Serviceand Adjustments.................... 16
Storage...............................................20
Troubleshooting.................................21
IllustratedPartsList............................44
PartsOrdering.....................Back Cover
LIMITED TWO YEAR WARRANTY ON CRAFTSMAN TILLER
For two (2) years from date of purchase, when this Craftsman Tiller is maintained,
lubricated, and tuned up according to the operating and maintenance instructions in
the owner's manual, Sears will repair free of charge any defect in material or workman-
ship.
This Warranty does not cover:
•Expendable items which become worn during normal use, such as tines, spark
plugs, air cleaners and belts.
•Repairs necessary because of operator abuse or negligence, including bent
crankshafts and the failure to maintain the equipment according to the instructions
contained in the owner's manual.
•If this Craftsman Tiller is used for commercial or rental purposes, this Warranty
applies for only thirty (30) days from the date of purchase.
Warranty service is available by returning the craftsman power mower to the nearest
sears service center/department in the united states. This warranty applies only while
this product is in use in the united states.
ThisWarrantygivesyouspecificlegalrights,and you may also have otherdghts which
varyfrom statetostate.
SEARS, ROEBUCK AND CO., D/817WA, HOFFMAN ESTATES, IL 60179
IMPORTANT: This cutting machine is capable of amputating hands and feet and
throwing objects. Failure to observe the following safety instructions could result in
serious injury or death.
TRAINING •
• Read the Owner's Manual carefully. Be
thoroughly familiar with the controls
and the proper use of the equipment. "
Know how to stop the unit and disen-
gage the controls quickly.
•Never allow children to operate the
equipment. Never allow adults to °
operate the equipment without proper
instruction.
•Keep the area of operation clear of all "
persons, padicularly small children,
and pets. °
PREPARATION
•Thoroughly inspect the area where the
equipment is to be used and remove all
foreign objects. 2
Disengage all clutches and shift into
neutral before starting the engine
(motor).
Do not operate the equipment without
wearing adequate outer garments.
Wear footwear that will improve footing
on slippery surfaces.
Handle fuel with care; it is highly
flammable.
Use an approved fuel container.
Never add fuel to a running engine or
hot engine.
Fill fuel tank outdoors with extreme
care. Never fill fuel tank indoors.
Replace gasoline cap securely and
clean up spilled fuel before restarting.

• Useextension cords and receptacles
as specified by the manufacturer for all
units with electric drive motors or
electric starting motors.
• Never attempt to make any adjustments
while the engine (motor) is running
(except where specifically recommend-
ed by manufacturer).
OPERATION
•Do not put hands or feet near or under
rotating parts.
•Exercise extreme caution when
operating on or crossing gravel drives,
walks, or roads. Stay alert for hidden
hazards or traffic. Do not carry passen-
gers.
•After striking a foreign object, stop the
engine (motor), remove the wire from
the spark plug, thoroughly inspect the
tiller for any damage, and repair the
damage before restarting and operat-
ing the tiller.
•Exercise caution to avoid slipping or
falling.
• If the unit should start to vibrate
abnormally, stop the engine (motor)
and check immediately for the cause.
Vibration is generally a warning of
trouble.
•Stop the engine (motor) when leaving
the operating position.
•Take all possible precautions when
leaving the machine unattended.
Disengage the tines, shift into neutral,
and stop the engine.
•Before cleaning, repairing, or inspect-
ing, shut off the engine and make
certain all moving parts have stopped.
Disconnect the spark plug wire, and
keep the wire away from the plug to
prevent accidental starting. Disconnect
the cord on electric motors.
•Do not run the engine indoors; exhaust
fumes are dangerous.
•Never operate the tiller without proper
guards, plates, or other safety protec-
tive devices in place.
•Keep children and pets away.
•Do not ovedoad the machine capacity
by attempting to till too deep at too fast
a rate.
•Never operate the machine at high
speeds on slippery surfaces. Look
behind and use care when backing.
•Never allow bystanders near the unit.
•Usa only attachments and accessories
approved by the manufacturer of the
tiller.
•Never operate the tiller without good
visibility or light.
•Be careful when tilling in hard ground.
The tines may catch in the ground and
propel the tiller forward. If this occurs,
let go of the handlebars and do not
restrain the machine.
MAINTENANCE AND STORAGE
•Keep machine, attachments, and
accessories in safe working condition.
•Check shear pins, engine mounting
bolts, and other bolts at frequent
intervals for proper tightness to be sure
the equipment is in safe working
condition.
•Never store the machine with fuel in the
fuel tank inside a building where
ignition sources are present, such as
hot water and space heaters, clothes
dryers, and the like. Allow the engine to
cool before storing in any enclosure.
•Always refer to the operator's guide
instructions for important details if the
tiller is to be stored for an extended
period.
_Look for this symbol to point out
important safety precautions. It means
CAUTION!!! BECOMEALERT!H YOUR
_LAFETY IS INVOLVED.
CAUTION: Always disconnect spark
plug wire and place wire where it cannot
contact spark plug in order to prevent
accidental starting when setting up,
transporting, adjusting or making repairs.
_WARNING: Engine exhaust, some of
its constituents, and certain vehicle
components contain or emit chemicals
known to the State of California to cause
cancer and birth defects or other repro-
ductive harm.
3

PRODUCT SPECIFICATIONS
GASOLINE 4 QUARTS
CAPACITY: UNLEADED
REGULAR
OIL (API-SF-SJ): SAE 30
3APACITY: 19 OZ.) (ABOVE 40°F)
SAE5W-30/10W-30
(BELOW 40°F)
,SPARK PLUG : CHAMPION
(GAP: .030") RJ19LM OR
J19LM
CONGRATULATIONS on your purchase
of a Sears Tiller. It has been designed,
engineered and manufactured to give
you the best possible dependability and
performance.
Should you experience any problems you
cannot easily remedy, please contact a
Sears or other qualified Service Center.
We have competent, well-trained techni-
cians and the proper tools to service or
repair this unit.
Please read and retain this manual. The
instructions will enable you to assemble
and maintain your tiller properly. Always
observe the "SAFETY RULES".
Your new tiller has been assembled at the
factory with exception of those parts left
unassembled for shipping purposes. To
ensure safe and proper operation of your
tiller all parts and hardware you as-
semble must be tightened securely. Use
the correct tools as necessary to insure
proper tightness.
CUSTOMER RESPONSIBILITIES
•Read and observe the safety rules.
•Follow a regular schedule in maintain-
ing, caring for and using your tiller.
•Follow the instructions under the
"Customer Responsibilities" and
"Storage" sections of this Owner's
_Manual.
WARNING: This unit is equipped with
an internal combustion engine and
should not be used on or near any
unimproved forest-covered, brush-
covered or grass covered land unless the
engine's exhaust system is equipped with
a spark arrester meeting applicable local
or state laws (ifany). If a spark arraster is
used, it should be maintained in effective
working order by the operator.
In the state of California the above is
required by law (Section 4442 of the
California Public Rssourcas Code).
Other states may have similar laws.
Federal laws apply on federal lands. A
spark arrester for the muffler is available
through your nearest Sears service
center (See REPAIR PARTS section of
this manual).
These accessories were available when the tiller was purchased. They are also
available at most Seam Retail outlets and Service Centem. Most Seam Stores can
order repair parts for you when you provide the model number of your tiller.
ENGINE
JSPARKPLUGI MUFFLER I AIRFILTER IGASC_ IENGIm!OIL _AUn_R
TILLER PERFORMANCE
FURROW OPENER
¢
TILLER MAINTENANCE
BELT _NES SHEAR MN HAIRPIN CLIp

Your new tiller has been assembled at the
factory with exception of those parts left
unassembled for shipping purposes. To
ensure safe and proper operation of your
tiller all parts and hardware you assemble
must be tightened securely. Use the
correct tools as necessary to insure
proper tightness.
TOOLS REQUIRED FOR ASSEMBLY
A socket wrench set will make assembly
easier. Standard wrench sizes are listed.
(1) Utility knife
(1) Wire cutter
(1) Tire pressure gauge
(t) Screwdriver
(1) Pair of pliers
(1) 9/16" wrench
OPERATOR'S POSITION
When right or left hand is mentioned in
this manual, it means when you are in the
operating position (standing behind tiller
handles).
FRONT
OPERATOR'S
POSITION
RIGHT
CONTENTS OF HARDWARE PACK
(2) Handle Locks (1) Center Locknut
(1) Carriage Bolt 3/8-16 UNC
3/8-16 UNC x 1Gr. 5
(1) Hairpin Clips
,(1) Flat Washer
13/32 x 1 x 11 Ga.
°l
(2) Shear Pins & Clips
(1) Cable Clip
(1) Pivot Bolt
3/8-16 UNC Grade 5
O(1) Handle Lock Lever %

UNPACKING CARTON
ACAUTION: Be careful of exposed
staples when handling or disposing of
cartoning material.
IMPORTANT: When unpacking and
assembling tiller, be careful not to stretch
or kink cables.
I. While holding handle assembly, cut
cable ties securing handle assembly
to top frame. Let handle assembly
rest on tiller.
2. Remove top frame of carton.
3. Slowly ease handle assembly up and
place on top of carton.
4. Cut down right hand front and right
hand rear comers of carton. Lay side
carton wall down.
5. Remove packing material from handle
assembly.
Shift Rod
Assembly
INSTALL HANDLE
1. Insert the thicker black handle lock
(with teeth facing to the right) in
gearcase notch.
VIEWED FROM R.H. SIDE OF TILLER
Assembly
Gearcase Notch
Handle Lock
•_t HandleAssembly
'_UP Positon
Tightenhandle
lockleverI hold
3. Rotate handle assembl,
JlF _
down. Insert
rear carriage bolt first, with head of
bolt on L.H. side of tiller and loosely
assemble Iocknut.
4. Insert pivot bolt in front part of plate
and tighten.
5. Cut down left hand rear corner of
carton. Lay rear carton wall down,
which will remove the protective
cardboard flap from leveling shield.
6. Cut down remaining comers of carton
and lay panels flat.
7. Lower the handle assembly. Tighten
nut on carriage bolt so handle moves
with some resistance. This will allow
for easier adjustment.
8. Place flat washer on threaded end of
handle lock lever.
9. Insert handle lock lever through
handle base and gearcase. Screw in
handle lock lever just enough to hold
lever in place.
10. Insert the smaller silver handle lock
(with teeth inward) in the slot of the
handle base (just inside of washer).
11 .With handle assembly in lowest
position, securely tighten handle lock
lever by rotating clockwise. Leaving
handle assembly in lowest position
will make it easier to remove tiller from
carton. Flat Washer Handle Lock
Handle Lock, Lever
Slot
2. Grasp handle assembly. Hold in "up" Rear Cartridge
position. Be sure handle lock remains BpIt
in gearcase notch. Slide handle
assembly into position.
Handle Bass

INSERT CABLE CLIP
• Insert plastic cable clip into hole on the
back of handle column. Push cables
into clip,
Handle Column
Clip
CONNECT SHIFT ROD
1. Insert end of shift rod into hole of shift
lever indicator.
2. Insert hairpin clip through hole of shift
rod to secure.
ShiftLever
HairpinC_lip Indicator
Sh_ Rod
REMOVETILLER FROM CRATE
1. Make sure shift lever indicator is in "N"
(neutral) position.
2. Tilt tiller forward by lifting handle.
Separate cardboard cover from
leveling shield.
3. Rotate tiller handle to the right and
pull tiller out of carton.
CHECKTIRE PRESSURE
The tires on your unit were overinflatad at
the factory for shipping purposes. Correct
and equal tire pressure is important for
best tilling performance.
•Reduce tire pressure to 20 PSI.
HANDLE HEIGHT
•Handle height may be adjusted to
better suit operator. (See _O ADJUST
HANDLE HEIGHT" in the Service and
Adjustments section of this manual).
7

KNOWYOURTILLER
READTHIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
TILLER.
Compare the illustrations with your tiller to familiarize yourself with the location of
various controls and adjustments. Save this manual for future reference.
_T_ E_S _GINE _ lr _ _ FUEL O_
_LL_G T_L_ FO_A_O NE_ R_ERSE CRWA_I_ ON _F
ThrottleControl
Lever
Ddve Control Bar Shift Lever Indicator
Drag
Depth Stake_
Recoil
Starter
Handle
MEETS ANSI SAFETYREQUIREMENTS
Ourtillersconformto the safetystandardsofthe American National StandardsInstitute.
DRIVE CONTROL BAR -Used to engage
tines.
DEPTH STAKE - Controls depth at which
tiller will dig.
DRAG STAKE -Controls forward speed
in forward rotating till position.
OUTER SIDE SHIELD -Adjustable to
protect small plants from being buried,
THROTTLE CONTROL -Used to control
engine speed.
LEVELING SHIELD - Levels tilled soil.
SHIFT LEVER - Used to shift transmission
gears.
SHIFT LEVER INDICATOR - Shows
which gear the transmission is in.
RECOIL STARTER HANDLE - Used to
start the engine.
8

The operation of any tiller can result in foreign objects thrown into the eyes,
which can result in severe eye damage. Always wear safety glasses or eye
shields before starting your tiller and while tilling. We recommend a wide
vision safety mask over spectacles or standard safety glasses.
HOWTO USEYOURTILLER
Know how to operate all controls before
adding fuel and oil or attempting to start
engine.
STOPPING
TINES AND DRIVE
1. Release drive control bar to stop
movement.
2. Move shift lever to "N" (neutral)
position.
ENGINE
• Move throttle control to "STOP" posi-
tion. if equipped with stop switch, move
switch to =STOP*' position.
NOTE: Never use choke to stop engine.
Drive ControlBar
"ENGA_ _._ Lever
"DISENGAGED" /
Position Throttle/_C(i
TINE OPERATION -WITH WHEEL
DRIVE
• Always release ddve control bar before
moving shift lever into another posi-
tion,
•Tins movement is achieved by moving
shift lever to either the counter rotating
(_,) till position or the forward rotating
(_) till position and engaging drive
control bar.
FORWARD -WHEELS ONLY/TINES
STOPPED
•Release drive control bar and move
shift lever indicator to UF"(forward)
position. Engage ddve control bar and
tiller will move forward.
REVERSE -WHEELS ONLY/TINES
STOPPED
1. DO NOT STAND DIRECTLY BEHIND
TILLER.
2. Release the drive control bar.
3. Move throttle control to "SLOW"
position,
4, Move shift lever indicator to "R"
(reverse) position.
5. Hold ddve control bar against the
handle to start tiller movement.
HARD TO SHIFT GEARS
•Bdefly engage drive control bar and
release or rock tiller forward and
backward until are able to shift gears,
DEPTH STAKE
The depth stake can be raised or
lowered to allow you more versatile
tilling and cultivating, or to more easily
transport your tiller,
ShallowestTilling_.. ""Transport Position
DeepestTilling
DepthStake
U
DRAG STAKE
The drag stake should be raised when
tilling the counter rotating (_) till position.
The drag stake should be lowered when
tilling in the forward rotating (_) till
position.
Lowered_
(ForwardRotatingtill)
Raised
(Counterrotatingtill)
"RLUNG
NOTE: Use the counter rotating tine drive
when tilling hard or rockey soil, virgin
ground or sod.
1. Release depth stake and drag stake
pins. Pull the depth stake up for
increased tilling depth. Raise the
drag stake. Place proper pin in hole of
depth stake or drag stake to lock in
position.
2. Place shift lever indicator in counter
rotating (_) till position.
3. Hold the drive control bar against the
handle to start tilling movement. Tines
and wheels will both turn.
9

4. Move throttle control to =FAST"
position for deep tilling.
IMPORTANT: Always release drive
control bar before moving shift lever into
another position. "Locked"Position
I/J'r '-FleI..eased"
Nit ,B,N_U_.A_ _Position
Outer Side
Shield
TURNING
1. Release the ddve control bar.
2. Move throttle control to =SLOW"
position.
3. Place shift lever indicator in =F"
(forward) position. Tines will not turn.
4. Lift handle to raise tines out of ground.
5. Swing the handle in the opposite
direction you wish to turn, being
careful to keep feet and legs away
from tines.
6. When you have completed your turn-
around, release the ddve control bar
and lower handle. Place shift lever in
(till) position and move throttle control
to desired speed. To begin tilling,
hold drive control bar against the
handle.
CULTIVATING
NOTE: Use the forward rotating fine drive
when cultivating, tilling soft ground or
tilling pre-tilled soil.
1. Release the depth and drag stake
pins. Lower drag stake. Pull the depth
stake up for increased tilling depth.
Place proper pin in hole of depth
stake or drag stake to lock in position.
2. Place shift lever indicator in forward to
rotating (_) till position.
3. Hold the ddve control bar against the
handle to start tilling movement. Tines
and wheels will both turn.
4. Move throttle control "FAST" position
for deep tilling. To cultivate, throttle
control can be set at any desired
speed, depending on how fast or slow
you wish to cultivate.
IMPORTANT: Always lower the drag
stake when using the forward rotating tine
drive.
OUTER SIDE SHIELDS
The back edges of the outer side shields
are slotted so that the shields can be
raised for deep tilling and lowered for
shallow tilling to protect small plants from
being buried.
1. Loosen nut _A" in slot and nut "B".
2. Move shield to desired position (both
sides).
3. Retighten nuts.
TOTRANSPORT
ACAUTION: Before liftingor transporting,
allow tiller engine and muffler to cool,
Disconnect spark plug wire. Drain
gasoline from fuel tank.
AROUND THE YARD
1. Release the depth stake pin. Move
the depth stake down to the top hole
for transporting the tiller. Place depth
stake pin in hole of depth stake to lock
in position. This prevents tines from
scuffing the ground.
2. Place shift lever indicator in "F_
(forward) position for transporting.
3. Hold the drive control bar against the
handle to start tiller movement. Tines
will not turn.
4. Move throttle control to desired speed.
AROUND TOWN
1. Disconnect spark plug wire.
2. Drain fuel tank.
3. Transport in updght position to
prevent oil leakage.
BEFORE STARTING ENGINE
IMPORTANT: Be very careful notto allow
dirt to enter the engine when checking or
adding oil or fuel. Use clean oil and fuel
and store in approved, clean, covered
containers, use clean fill funnels.
CHECK ENGINE OIL LEVEL
The engine in your unit has been
shipped, from the factory, already filled
with SAE 30 summer weight oil.
1. With engine level, clean area around
oil filler plug and remove plug.
2. Engine oil should be to point of
ovedowing when engine is level.
•For approximate capacity see "PROD-
UCT SPECIFICATIONS" on page 4 of
this manual. All oil must meet A.P.I,
Service Classification SF, SG or SH.
3. Reinstall engine oil cap and tighten
10