
3/4
Step 4: Set the pump to its High Volume setting by rotating the air
switch clockwise until it clicks into place.
Step 5: Support the pump head by placing your palm on the
backside of the head and grasp the spokes with your
fingers to stabilize the pump.
Step 6: If you start to feel resistance while pumping
up your tire, set the pump to the High
Pressure mode by turning the air switch
counter clockwise till it clicks into place.
Step 1: If inflating a tube with a presta valve, remember
to unscrew the valve locknut and tap to insure
it is not stuck.
Step 2: Push the pump head onto your valve. Step 3: Lift the lever arm from the pump head to lock
into place.
4
0
-
1
0
0
p
s
i
0
-
4
0
p
s
i
4
0
-
1
0
0
p
s
i
0
-
4
0
p
s
i