Crate&Barrel Mid Century Spindle Conversion Bed User manual

800.967.6696 | crateandbarrel.com
Made in Vietnam - r04
WARNING
!
CLEANINGANDCARE:
Cleansurfaceswithadryordampsoftcloth.Donotuseabrasivecleaners.
Periodically check and ensure that the components of this bed are in their proper position,
free from damage, and all connectors are tight.
• Do not place near windows where cords from blinds or drapes may strangle a child.
• Do not place items with a string, cord or ribbon around a child’s neck, such as hood
strings or pacifier cords.
• Do not suspend strings over a bed for any reason.
• The intended mattress dimension on the bed are as follows:
Full: 53”-54”W x 74”-75”L
Mid-Century Spindle Conversion Bed Assembly Instructions

20 - Large bolts
*Provided with crib packaging
2 - Small bolts 14 - Screws
2 - Spring washers
20 - Spring washers
(Pre-attached to large bolts)
*Provided with crib packaging
2 - Flat washers
20 - Flat washers
(Pre-attached to large bolts)
*Provided with crib packaging
Phillips head screwdriver
(Not included)
2 - Small bolt caps2 - Half-moon brackets
800.967.6696 | crateandbarrel.com
WARNING:
CHOKING HAZARD - SMALL PARTS
Small parts present in unassembled state.
Adult assembly required.
This page lists the contents included in the box. Please take
time to identify the hardware as well as the individual
components of the product. As you unpack and prepare for
assembly, place the contents on a carpeted or padded area
to protect them from damage. Please follow the assembly
instructions closely. Improper assembly can result in
personal or property damage.
Note: 2 adults are required to safely assemble this product.
Mid-Century Spindle Conversion Bed Assembly Instructions
Page 1 of 6
Made in Vietnam - r04
1 - Small Allen wrench 1 - Small Allen wrench
*Provided with crib packaging
NOTE: Hardware will be re-used from crib/toddler bed assembly

800.967.6696 | crateandbarrel.com
Made in Vietnam - r04
Mid-Century Spindle Conversion Bed Assembly Instructions
Page 2 of 6
1 - Side panel
*Provided with
crib packaging
AB
2 - Leg A
*Provided with
crib packaging
2 - Leg B
*Provided with
crib packaging
1 - Slat
assembly
2 - Side rails
1 - Footboard

With assistance of another adult, attach headboard assembly to 1 side rail with 3 large bolts, 3 spring washers and 3
flat washers as shown. Secure bolts with a small Allen wrench.
1
2
Made in Vietnam - r04
Mid-Century Spindle Conversion Bed Assembly Instructions
800.967.6696 | crateandbarrel.com
Page 3 of 6
Attach 1 leg A and 1 leg B to 1 side panel/headboard as shown. Using a small Allen wrench, secure each leg with 2 large
bolts, 2 spring washers and 2 flat washers as shown. Repeat steps for footboard. Do not over tighten the bolts.
A
A
B
A
B
side panel/
headboard
foot rail
headboard
assembly
(Pre-attached to large bolts)
(Pre-attached to large bolts)

At this point, insert 1 large bolt, 1 spring washer, 1 flat washer and 1 half-moon bracket into footboard assembly as
shown. Secure bolt with a small Allen wrench.
With assistance of another adult, attach footboard assembly to side rail with 2 large bolts, 2 spring washers and 2 flat
washers as shown.
800.967.6696 | crateandbarrel.com
3
4
Made in Vietnam - r04
Mid-Century Spindle Conversion Bed Assembly Instructions
Page 4 of 6
footboard
assembly
(Pre-attached to large bolts)
(Pre-attached to large bolts)

At this point, insert 1 large bolt, 1 spring washer, 1 flat washer and 1 half-moon bracket into footboard assembly as
shown. Secure bolt with a small Allen wrench.
800.967.6696 | crateandbarrel.com
Attach remaining side panel to bed assembly and secure with 5 large bolts, 5 spring washers and 5 flat washers as shown.
Made in Vietnam - r04
Mid-Century Spindle Conversion Bed Assembly Instructions
Page 5 of 6
5
6
(Pre-attached to large bolts)
(Pre-attached to
large bolts)

800.967.6696 | crateandbarrel.com
Insert 2 bolt caps into exposed holes of outside of headboard assembly as shown. Secure each bolt cap with 1 small
bolt, 1 spring washer and 1 flat washer, using 2 small Allen wrenches. Assembly is now complete.
Made in Vietnam - r04
Mid-Century Spindle Conversion Bed Assembly Instructions
Page 6 of 6
7
8
Position bed assembly upright. Place slat assembly into bed assembly and secure with 14 screws as shown. Secure, but
do not over tighten, screws with a Phillips head screwdriver.