Crate&Barrel PATERSON User manual

Made in China - r04 Page 1 of 4
Thank you for purchasing the Paterson Bench. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
PATERSON BENCH
Customer Service 800.967.6696 |Latest instructions available at www.crateandbarrel.com
HARDWARE
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
8 - cam
screws
8 - cams22 - wood
dowels
8 - barrel
nuts
8 - large
bolts
COMPONENTS
2 - side panels
(1 left, 1 right)
1 - partition 1 - top panel
1 - back panel 1 - cushion
(sold separately)
1 - base
Missing hardware?
Please call 800.606.6387 for replacements.

PATERSON BENCH
Made in China - r04 Page 2 of 4
Customer Service 800.967.6696 |Latest instructions available at www.crateandbarrel.com
1 A) Insert 2 cams and 4 wood dowels into partition as shown. Make sure arrow on each cam
points toward nearest edge with holes.
B) Insert 8 cam screws into top panel as shown. Secure, but do not over tighten, with a phillips
head screwdriver.
2 Fit dowels of partition into corresponding holes of top
panel as shown. Using a screwdriver, turn each cam
clockwise until it securely engages each cam screw. 3 Insert 2 cams and 4 wood dowels in left and right
side panels as shown.
B
NOTE: Do not over
tighten the cam screws
partition
NOTE: Make sure arrow on
each cam points toward nearest
edge with holes
top panel
partition
top panel
right side panel
NOTE: Make sure cams in
partition are secured to
cam screws in top panel
A
left side panel

PATERSON BENCH
Made in China - r04 Page 3 of 4
Customer Service 800.967.6696 |Latest instructions available at www.crateandbarrel.com
5 Fit dowels of back panel into corresponding holes of
left and right side panels as shown.
6 With assistance of another adult, carefully fit dowels
of back/side assembly into corresponding holes of top
assembly. Secure cams.
7 Insert 8 barrels nuts into assembly as shown. Using
a screwdriver, align hole in barrel nut with holes in
nearest edge.
NOTE: Make sure pilot holes
in back panel face outwards
during assembly
back panel
right side panel
left side panel
back/side
assembly
top
assembly
NOTE: Make sure hole
in barrel nut aligns with
hole in nearest edge
NOTE: Make sure cams in back/side
panels are secured to cam screws in
top assembly
4 Insert 2 cams and 10 wood dowels into back
panel as shown.
back panel
NOTE: Make sure the cams in
back/side panels are positioned
at the bottom during assembly

PATERSON BENCH
Made in China - r04 Page 4 of 4
Customer Service 800.967.6696 |Latest instructions available at www.crateandbarrel.com
9 With assistance of another adult, position unit
upright. Place cushion (sold separately) onto top
assembly as shown.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.
8 With assistance of another adult, fit dowels of assem-
bly into corresponding holes of base. Using a screw-
driver, attach base with 8 large bolts and through each
barrel nut as shown. Do not over tighten the bolts.
base
cushion
(sold separately)
NOTE: Do not over tighten
the bolts

Made in China - r03 Page 1 of 2
Thank you for purchasing the Paterson Back Panel.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
PATERSON BACK PANEL
Customer Service 800.967.6696 |Latest instructions available at www.crateandbarrel.com
ASSEMBLY HARDWARE
2 - small
screws
WALL MOUNTING HARDWARE
1 - large
screw
1 - plastic
anchor
1 - wall
strap
1 - wall
bracket
1 - anti-tip
bracket
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
9 - bolts
COMPONENTS
1 - bench assembly
(sold separately)
1 - back panel
assembly
Missing hardware? Please call 800.606.6387 for replacements.
ASSEMBLY
With the assistance of another adult, position back panel
assembly as shown. Attach back panel assembly to bench
assembly (sold separately) with 9 bolts as shown. Secure,
but do not over tighten, bolts with a phillips head screwdriver.
Assembly is now complete.
back panel
assembly
bench assembly
(sold separately)
NOTE: Do not over
tighten the bolts
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.

PATERSON BACK PANEL
Made in China - r3 Page 2 of 2
Customer Service 800.967.6696 |Latest instructions available at www.crateandbarrel.com
WALL
For added safety and stability, it is recommended that the wall mounting
hardware be installed. For safe mounting, it is essential to use wall
anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.).
Mount to wood studs whenever possible.
A) Attach anti-tip bracket to top of back panel assembly using 2 small
screws as shown.
B) Determine the final location of unit. Mark position on the wall,
approximately 2" below the anti-tip bracket mounted to the back of the
unit.
C) Drill a pilot hole in the wall stud. If the wall stud is not available, drill a
hole in the wall that is slightly smaller in diameter than the anchor. Gently
tap the plastic anchor until the flange of the anchor is flush with the wall.
D) Attach wall bracket to the wall by inserting 1 large screw, and into
the plastic anchor in the wall.
E) Place the unit so the anti-tip bracket on the back edge is aligned with
the wall bracket on the wall.
F) Lace one end of the wall strap through both brackets, and into the
other end of the strap.
G) Pull the strap tightly until secure.
Wall mounting assembly is now complete.
NOTE: If you are unsure about
your wall type or what mounting
method you should use, consult
a qualified professional or your
local hardware store.
OPTIONAL WALL MOUNTING
INSTRUCTIONS
back panel
assembly
A
C
DFanti-tip
bracket
small
screw
wall
bracket
plastic
anchor
large
screw
wall
strap