Creacheer ONE User manual

Creacheer ONE
Wearable Computer
User Manual
DRAFT
Model CR1

2
DRAFT
Introduction
Thanks for purchasing Creacheer ONE. This User Manual
includes important information related to care and safe han-
dling and shows how to get started using the product.
Product Components
(1) Sensor Module
(2) Charging Dock
(3) Adhesive Stickers
(4) Charging Cable
1
3
4
2

3
DRAFT
Intended Use
Creacheer ONE is a wearable device that senses body posi-
tion and motion, delivers vibration alerts, and provides other
wearable computing functionality. Creacheer ONE commu-
nicates wirelessly via Bluetooth and operates in conjunction
with approved software applications running on the user’s
smartphone or mobile device.
NOTE: Creacheer ONE is not a medical device and is not
intended to diagnose, treat, cure, or prevent any disease.
Product Safety
Users must read, understand, and follow all instructions in
this manual before operating this product. Failure to do so
may result in electrical shock, injury, re, data loss, and or
damage to the product.
DANGER
To reduce the risk of electrical shock:
• Do not expose the Charging Dock or the Charging Cable
to moisture or liquids.
• Do not submerge or swim with the Sensor Module. While
capable of resisting splashes and rinsing, it is not de-
signed to be submerged.
WARNING
To reduce the risk of electrical shock, injury, re, data loss,
and or damage to the product:
• Only use the product for its intended use.
• This is not a toy and is not intended for children. Do
not allow children to have unsupervised access to the
Creacheer ONE product. Small parts included with this
product may represent a choking hazard.
• Do not attempt to open the enclosure of any product

4
DRAFT
component or attempt to repair the product yourself.
This may expose you to electrical or other hazards and
will void the product warranty.
• The Sensor Module component contains a lithium-ion
polymer battery. Do not puncture the Sensor Module,
expose it to extreme heat, expose it to crushing loads,
or dispose of it in a re. Do not attempt to replace the
battery. It is rechargeable but non-replaceable.
• For charging the device, use only the provided Charging
Cable, or another certied USB cable of less than 3 me-
ters in length, plugged into a certied USB powered port.
• Before wearing the Sensor Module for a signicant dura-
tion, rst test to determine if your skin is sensitive to the
Sensor Module or Adhesive Sticker. Some people may
have adverse skin reactions.
• Each Adhesive Sticker is intended to be worn for up to 24
hours. Do not reuse stickers or wear for longer than 24
hours.
• Do not place the Sensor Module or Adhesive Sticker on
irritated or injured skin.
• When removing the Sensor Module and Adhesive Stick-
er, remove the device slowly from the skin, allowing the
Adhesive Sticker to gradually disengage.
• Do not wear the Sensor Module if it is damaged or exces-
sively hot after charging.
• Avoid exposing any of the product components to harsh
chemicals, including solvents and corrosive agents.
Harsh chemicals can damage plastic enclosures.
• Avoid exposing any of the product components to signif-
icant periods of direct sunlight. Ultraviolet radiation in
sunlight can damage or weaken plastic enclosures.
• To ensure proper functioning of the product and to avoid
data loss, follow the instructions provided in the ap-
proved software application, including instructions relat-
ed to syncing data and updating software and rmware.
CAUTION

5
DRAFT
• To minimize the chance of skin irritation, wear the Sensor
Module on a variety of skin locations. Avoid wearing the
Sensor Module on the same skin location for two or more
consecutive days.
Product Care
• The Sensor Module can be cleaned with a cloth damp-
ened with water or mild soap and water.
• The Charging Dock can be cleaned with a dry cloth.
• To protect the lifetime of the rechargeable battery, charge
the device fully at least once per month.
• Store the product at room temperature. Additionally prior
to storing, ensure that the Sensor Module has at least
50% battery charge status. To protect the lifetime of the
rechargeable battery, never store the Sensor Module in
the low battery state.
• This product contains a lithium-ion polymer battery which
must be disposed of with care. Do not dispose of the
product with normal household waste. Please refer to
the waste-handling regulations and guidance issued by
your local authorities for battery disposal procedures.

6
DRAFT
Getting Started
First, fully charge the Sensor Module.
To charge the Sensor Module:
• Place the Sensor Module in the Charging Dock so that the
two gold contacts on the Sensor Module align with and
touch the two gold pins of the Charging Dock.
• Rotate the circular bezel of the Charging Dock clockwise
until you feel a click. This secures the Sensor Module.
• Ensure that the Charging Cable is plugged into both the
Charging Dock and a standard powered USB port.
• The Sensor Module will vibrate once when charging
begins and its light will begin to blink slowly. You can
view the light through the hole on the underside of the

7
DRAFT
Charging Dock.
• Charging is complete when the light on the Sensor Mod-
ule glows constantly, without blinking.
Next, download the app.
• Find and download the Creacheer App on the Apple App
Store or Google Play Store.
• Once downloaded, launch the app and follow the instruc-
tions. The instructions included in the application will
show you how to connect wirelessly to the Sensor Mod-
ule, how to apply the Adhesive Sticker and wear the Sen-
sor Module properly, and how to start using the product
functionality.
Specications
Sensor Module
• Width, length, depth: 25 mm, 49 mm, 5 mm
• Weight: 6 grams
• Battery: rechargeable lithium-ion polymer
• Ingress protection: water resistant to splashes and rins-
ing
• Material: polycarbonate enclosure, gold-plated charge
contacts
• Connectivity: Bluetooth Low Energy
Charging Dock
• Diameter, depth: 69 mm, 15 mm
• Weight: 28 grams
• Ingress protection: not water resistant
• Material: polycarbonate enclosure, gold-plated charge
contacts
Adhesive Sticker
• Skin-facing surface: silicone adhesive
• Device-facing surface: acrylic adhesive

8
DRAFT
General
• Supply/Input: 5V DC, 0.5A
• Charging Temperature: 0° to 45° C (32° to 113° F)
• Operating Temperature: -10° to 45° C (14° to 113° F)
• Non-operating Temperature: -20° to 60° C (-4° to 140° F)
• Relative humidity: 15% to 95% (non-condensing)
• Atmospheric pressure: 70 - 107 kPa
Supported mobile device operating systems
• Apple iOS 10 or higher
• Android 4.4 or higher
Support and Contact Information
If you have questions about this product, please visit www.
creacheer.com/support.
Warranty
Creacheer, Inc. provides a limited warranty to the purchaser
of a new Creacheer ONE product when the product is pur-
chased directly from Creacheer, Inc. or from an authorized
reseller.
According to the terms of this limited warranty, Creacheer’s
products are warranted against defects in materials and
workmanship and shall perform in accordance with pub-
lished specications for a period of one year after the date of
purchase. Creacheer reserves the right to change specica-
tions without notice.
For full warranty and product return details, please visit:
www.creacheer.com/returns.

9
DRAFT
Regulatory Information
Model: CR1
FCC ID: 2AQRCCR1
IC: 24183-CR1
United States: FCC
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference, including inter-
ference that may cause undesired operation of the device.
FCC Warning
Changes or modications not expressly approved by
Creacheer, Inc. could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular in-
stallation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician

10
DRAFT
for help.
This device meets the FCC and IC requirements for RF expo-
sure in public or uncontrolled environments.
Cet appareil est conforme aux conditions de la IC en matière
de RF dans des environnements publics ou incontrôlée.
FCC Electronic Label
FCC Regulatory Information is available via an e-label in the
accompanying smartphone app. To view the content: Navi-
gation Menu > About > Regulatory Information
Canada: Industry Canada
IC Notice to Users English/French in accordance with RSS
GEN Issue 5:
This device complies with Industry Canada license exempt
RSS standard(s). Operation is subject to the following two
conditions:
1. this device may not cause interference, and
2. this device must accept any interference, including inter-
ference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada RSS stan-
dard exempts de licence(s). Son utilisation est soumise à
Les deux conditions suivantes:
1. cet appareil ne peut pas provoquer d’interférences et
2. cet appareil doit accepter Toute interférence, y compris
les interférences qui peuvent causer un mauvais fonctionne-
ment du dispositive.
This Class B digital apparatus complies with Canadian ICES-
003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Canada Electronic Label
Notice to the User: The IC ID can also be viewed on your
smartphone. To view the content: Navigation Menu > About >
Regulatory Information

11
DRAFT
Avis à l’utilisateur: L’ID de l’IC peut également être consulté
sur votre appareil mobile. Pour voir le contenu: Menu de navi-
gation > À propos > Informations réglementaires
Copyright © 2019 Creacheer, Inc. All rights reserved.
Creacheer is the registered trademark of Creacheer, Inc. All
other mentioned trademarks and tradenames are the proper-
ty of their respective owners.