
When connecting the devices, please observe the following:
●When connecting the transmitter to the receiver, Crestron recommends using
Crestron CRESCAT-IM (sold separately) or high-quality CAT5 twisted-pair
cable.
● Do not connect to a DigitalMedia™ network or device, or to any other network
or device.
NOTE: All cables and connectors are sold separately.
2
quickstart guide
AUD-EXT Series
www.crestron.com
888.273.7876 201.767.3400
Specifications subject to
change without notice.
AUD-EXT Series
For Regulatory Compliance information, refer to Doc. 7532.
QUICKSTART DOC. 7531A (2037378) 01.14
Audio Over CAT5 Extenders
* If using only the unbalanced connection, the maximum length is 2000 ft (610 m).
The specific patents that cover Crestron products are listed at patents.crestron.com.
Crestron, the Crestron logo, DigitalMedia, and Sonnex are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States
and/or other countries.
Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in
typography or photography.
This document was written by the Technical Publications department at Crestron.
© 2014 Crestron Electronics, Inc.
5Hardware Hookup
Receiver
L RCH1
AUDIO OUT
IN
AUDIO
RECEIVER
AUD-EXT-100
Transmitter
AUDIO IN
L RCH1
AUDIO
OUT
AUD-EXT-100
TRANSMITTER
From Audio Source
6Specifications
Further Inquiries
To locate specific information or resolve questions after reviewing this guide, contact Crestron's True Blue Support at
1-888-CRESTRON [1-888-273-7876] or, for assistance within a particular geographic region, refer to the listing of
Crestron worldwide offices at www.crestron.com/offices.
To post a question about Crestron products, log onto Crestron’s Online Help at www.crestron.com/onlinehelp.
First-time users must establish a user account to fully benefit from all available features.
Future Updates
As Crestron improves functions, adds new features, and extends the capabilities of the AUD-EXT Series, additional
information may be made available as manual updates. These updates are solely electronic and serve as intermediary
supplements prior to the release of a complete technical documentation revision.
Check the Crestron website periodically for manual update availability and its relevance. Updates are identified as an
“Addendum” in the Download column.
7Troubleshooting
SPECIFICATION DETAILS
AUDIO
Bandwidth
Signal-to-Noise Ratio
Total Harmonic Distortion + Noise
Crosstalk
Power Requirements
Environmental
Temperature
Humidity
Available Models
AUD-EXT-100
AUD-EXT-200
AUD-EXT-201
AUD-EXT-202
20–20,000 Hz
> 100 dB
< 0.1%, 20 Hz, 2 Vrms
< -70 dB
None
41° to 122° F (5° to 50° C)
10% to 90% RH (non-condesing)
(1) Unbalanced stereo signal; 2000 ft (610 m) max
(2) Unbalanced stereo signals; 2000 ft (610 m) max
(1) Unbalanced stereo signal and (2) S/PDIF signals;
600 ft (183 m) max*
(2) S/PDIF signals; 600 ft (183 m) max
SWAMP-24X8