Crestron DM Lite 4K60 User manual

DM Lite® 4K60 4:4:4 Extenders
Product Manual
Crestron Electronics, Inc.

Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Regulatory Model: M202045001, M202046002, M202046003, M202046004, M202047002, M202047003
Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a
limited nonexclusive, nontransferable Software Development Tools License Agreement. Crestron product operating
system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement.
Both of these Agreements can be found on the Crestron website at www.crestron.com/legal/software_license_
agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.
Crestron, the Crestron logo, .AV Framework, DM Lite, and DMPS Lite are either trademarks or registered trademarks of
Crestron Electronics, Inc. in the United States and/or other countries. Dolby Digital and Dolby Vision are either
trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS is either a
trademark or registered trademark of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI logo
are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries.
TOSLINK is either a trademark or registered trademark of Toshiba Electronics Devices & Storage Corporation in the
United States and/or other countries. USB Type-C and USB-C are either trademarks or registered trademarks of USB
Implementers Forum, Inc. in the United States and/or other countries. DisplayPort is either a trademark or registered
trademark of Video Electronics Standards Association in the United States and/or other countries. Other trademarks,
registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks
and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is
not responsible for errors in typography or photography.
©2022 Crestron Electronics, Inc.

Contents
Overview 1
Models 2
Features 4
DM Lite Interoperability 4
4K60 4:4:4 and HDR Support 5
Automatic Switching of Inputs 5
USB-C DisplayPort Input with Charging Capability (Certain Models Only) 5
Analog Audio Embedding (Certain Models Only) 5
Analog Audio De-Embedding (Certain Models Only) 6
S/PDIF Optical Digital Audio Return (Certain Models Only) 6
Surface-Mountable or Wall Plate Design 6
Physical Description 7
Surface-Mountable Transmitters 7
Wall Plate Transmitters 16
Surface-Mountable Receivers 22
Wall Plate Receivers 24
Specifications 26
Installation 27
Installation Guidelines 27
DM Lite Cabling 27
HDMI Cabling 28
Power Connection 29
Surface-Mountable Device Installation 31
In the Box 31
Installing a Surface-Mountable Device 33
Connecting a Surface-Mountable Device 38
Wall Plate Device Installation 55
In the Box 55
Installing a Wall Plate Device 55
Connecting a Wall Plate Device 62
Resources 76
Crestron Support and Training 76
Programmer and Developer Resources 76
Product Certificates 76
Product Manual — Doc. 9259A Contents • i

ii • Contents Product Manual — Doc. 9259A

Product Manual — Doc. 9259A DM Lite® 4K60 4:4:4 Extenders • 1
Overview
DM Lite® 4K60 4:4:4 extenders transport various signal types over CATx cable in point-to-point
applications. Consisting of a wide variety of DM Lite transmitters and DM Lite receivers, the
extenders offer the capability to transport HDMI®, USB-C® DisplayPort™ (DisplayPort Alt Mode),
analog audio, RS-232, and IR signals. The transmitters and receivers support video resolutions up
to 4K60 with 4:4:4 color sampling.
A CAT5e or higher cable is used to connect a DM Lite 4K60 4:4:4 transmitter to a DM Lite 4K60
4:4:4 receiver. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is
supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.
In addition to interoperability between a DM Lite 4K60 4:4:4 transmitter and receiver, the
extenders are also interoperable with DMPS Lite™ switchers and with DM Lite 4K60 4:2:0
transmitters and receivers. A CAT5e or higher cable is used to connect a DM Lite 4K60 4:4:4
extender to a DMPS Lite switcher. Similarly, a CAT5e or higher cable is used to connect a DM
Lite 4K60 4:4:4 extender to a DM Lite 4K60 4:2:0 extender.
DM Lite 4K60 4:4:4 extenders are available as surface-mountable devices and as wall plate
devices. Surface-mountable devices are designed for mounting to a flat surface such as a wall.
Wall plate devices are designed for installation into an electrical box.
This section provides information about the following:
lModels
lFeatures
lPhysical description

2 • DM Lite® 4K60 4:4:4 Extenders Product Manual — Doc. 9259A
Models
The following table provides a list of DM Lite 4K60 4:4:4 transmitters and receivers.
Model Description
TRANSMITTERS
Transmitters, Surface-Mountable
HD-TX-4KZ-101 HDMI® Signal Extension over CATx Cable
HD-TXA-4KZ-101 HDMI and Analog Audio Signal Extension over CATx Cable
HD-TXC-4KZ-101 HDMI, RS-232, and IR Signal Extension over CATx Cable
HD-TXCA-4KZ-101 HDMI, RS-232, IR, and Analog Audio Signal Extension over CATx Cable
HD-TX-4KZ-111 USB-C® DisplayPort™ Signal Extension over CATx Cable
HD-TX-4KZ-201 2x1 Auto-Switcher, HDMI Signal Extension over CATx Cable
HD-TX-4KZ-211-CHGR 2x1 Auto-Switcher, HDMI and USB-C DisplayPort Signal Extension over
CATx Cable
HD-TX-4KZ-401 4x1 Auto-Switcher, HDMI Signal Extension over CATx Cable
HD-TX-4KZ-421-CHGR 4x1 Auto-Switcher, HDMI and USB-C DisplayPort Signal Extension over
CATx Cable
Transmitters, Wall Plate
HD-TX-4KZ-101-1G-B HDMI Signal Extension over CATx Cable, 1 Gang, Black
HD-TX-4KZ-101-1G-W HDMI Signal Extension over CATx Cable, 1 Gang, White
HD-TXA-4KZ-101-1G-B HDMI and Analog Audio Signal Extension over CATx Cable, 1 Gang, Black
HD-TXC-4KZ-101-1G-B HDMI, RS-232, and IR Signal Extension over CATx Cable, 1 Gang, Black
HD-TXC-4KZ-101-1G-W HDMI, RS-232, and IR Signal Extension over CATx Cable, 1 Gang, White
HD-TX-4KZ-111-1G-B USB-C DisplayPort Signal Extension over CATx Cable, 1 Gang, Black
HD-TX-4KZ-111-1G-W USB-C DisplayPort Signal Extension over CATx Cable, 1 Gang, White
HD-TX-4KZ-211-2G-B 2x1 Auto-Switcher, HDMI and USB-C DisplayPort Signal Extension over
CATx Cable, 2 Gang, Black
HD-TX-4KZ-211-2G-W 2x1 Auto-Switcher, HDMI and USB-C DisplayPort Signal Extension over
CATx Cable, 2 Gang, White
RECEIVERS
Receivers, Surface-Mountable
HD-RX-4KZ-101 HDMI Signal Extension over CATx Cable
HD-RXA-4KZ-101 HDMI and Analog Audio Signal Extension over CATx Cable
HD-RXC-4KZ-101 HDMI, RS-232, and IR Signal Extension over CATx Cable

Product Manual — Doc. 9259A DM Lite® 4K60 4:4:4 Extenders • 3
Model Description
HD-RXCA-4KZ-101 HDMI, RS-232, IR, and Analog Audio Signal Extension over CATx Cable
Receivers, Wall Plate
HD-RX-4KZ-101-1G-B HDMI Signal Extension over CATx Cable, 1 Gang, Black
HD-RXC-4KZ-101-1G-B HDMI, RS-232, and IR Signal Extension over CATx Cable, 1 Gang, Black

4 • DM Lite® 4K60 4:4:4 Extenders Product Manual — Doc. 9259A
Features
Key features of DM Lite 4K60 4:4:4 extenders include:
lDM Lite transmitter interoperability with a DM Lite receiver or DMPS Lite switcher
lDM Lite receiver interoperability with a DM Lite transmitter or DMPS Lite switcher
lPoint-to-point extension of various signal types over a CAT5e or higher cable:
oHDMI (all models excluding the HD-TX-4KZ-111 and HD-TX-4KZ-111-1G)
oUSB-C DisplayPort (DisplayPort Alt Mode) (HD-TX-4KZ-111, HD-TX-4KZ-111-1G,
HD-TX-4KZ-211-2G, HD-TX-4KZ-211-CHGR, and HD-TX-4KZ-421-CHGR only)
oAnalog audio (HD-TXA-4KZ-101, HD-TXA-4KZ-101-1G, HD-TXCA-4KZ-101, HD-RXA-
4KZ-101, and HD-RXCA-4KZ-101 only)
oBidirectional RS-232 and IR pass-through (HD-TXC-4KZ-101, HD-TXC-4KZ-101-1G,
HD-TXCA-4KZ-101, HD-RXC-4KZ-101, HD-RXC-4KZ-101-1G, and HD-RXCA-4KZ-101
only)
lDM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft
(70 m) for 1080p, WUXGA, and 2K signals
l4K60 video with 4:4:4 color sampling
lHDR10, HDR10+, and Dolby Vision® video formats
lCompliance with HDCP 2.3
lEDID pass-through capability
lCEC (Consumer Electronics Control) pass-through capability
lAutomatic switching of inputs on multi-input transmitters
lS/PDIF optical digital audio return (HD-TXCA-4KZ-101 and HD-RXCA-4KZ-101 only)
lUSB-C DisplayPort inputs with charging capability (HD-TX-4KZ-211-CHGR and HD-TX-
4KZ-421-CHGR only)
lSurface-mountable or wall plate design
lPower from one of the following:
oLocal 24VDC power pack
oRemote surface-mountable DM Lite transmitter or receiver
oRemote DMPS Lite switcher
lPower pack included with surface mountable DM Lite transmitters and receivers
DM Lite Interoperability
The DM Lite output port of a DM Lite 4K60 4:4:4 transmitter must be connected to a DM Lite
input port of a DM Lite receiver or DMPS Lite switcher. Similarly, the DM Lite input port of a DM
Lite 4K60 4:4:4 receiver must be connected to a DM Lite output port of a DM Lite transmitter or
DMPS Lite switcher. Supported DMPS Lite switchers are the HD-PS622, HD-PS621, HD-PS402,
and HD-PS401. A DM Lite 4K60 4:4:4 transmitter is also interoperable with the HD-RX-4K-210-
C-E and HD-RX-4K-210-C-E-POE DMPS Lite switchers.

Product Manual — Doc. 9259A DM Lite® 4K60 4:4:4 Extenders • 5
NOTE: DM Lite 4K60 4:4:4 extenders are also interoperable with DM Lite 4K60 4:2:0
extenders (for example, the HD-TX-101-C-E transmitter and the HD-RX-101-C-E receiver).
A DM Lite 4K60 4:4:4 transmitter and receiver can be configured and controlled only when the
devices are paired with a DMPS Lite switcher. The web interface of the switcher can be used to
configure the DM Lite devices. In addition, control system programming and .AV Framework™
software support of the DM Lite devices is hosted by the switcher.
4K60 4:4:4 and HDR Support
DM Lite 4K60 4:4:4 extenders support video resolutions up to 4K60 with 4:4:4 color sampling.
HDR10, HDR10+, and Dolby Vision® video formats are also supported.
Automatic Switching of Inputs
NOTE: Automatic switching of inputs is applicable to the following multi-input transmitters:
HD-TX-4KZ-201, HD-TX-4KZ-401, HD-TX-4KZ-211-CHGR, HD-TX-4KZ-421-CHGR, and HD-
TX-4KZ-211-2G.
When a multi-input transmitter is used with a DMPS Lite switcher, the web interface of the
switcher or control system programming hosted by the switcher can be used to configure the AV
switching behavior of the transmitter. Automatic switching of the inputs can occur based on the
last connected input or on the routing priority assigned to each input. In addition, one or more
input selection push buttons on the front of the transmitter enable the desired input to be
selected manually.
USB-C DisplayPort Input with Charging Capability
(Certain Models Only)
NOTE: Charging capability provided by a USB-C DisplayPort input is applicable to the HD-
TX-4KZ-211-CHGR and HD-TX-4KZ-421-CHGR transmitters only.
The HD-TX-4KZ-211-CHGR includes one USB-C DisplayPort input with charging capability. The
HD-TX-4KZ-421-CHGR includes two USB-C DisplayPort inputs with charging capability. When
the transmitters are powered by the included power pack, a USB-C DisplayPort input can charge
the connected AV source (for example, a laptop) with up to 60W of power. If the transmitters
are powered by a remote DM Lite receiver or DMPS Lite switcher, no charging capability is
provided by a USB-C DisplayPort input.
Analog Audio Embedding (Certain Models Only)
NOTE: Analog audio embedding is applicable to the HD-TXA-4KZ-101 and HD-TXCA-4KZ-101
transmitters only.

6 • DM Lite® 4K60 4:4:4 Extenders Product Manual — Doc. 9259A
The analog audio input port of the HD-TXA-4KZ-101 and HD-TXCA-4KZ-101 enables a
balanced/unbalanced stereo audio source to be embedded with the video signal from the HDMI
input. An audio selection push button is provided to switch between analog and HDMI audio
inputs as desired. The audio selection push button is functional only when the transmitter is used
with a DM Lite 4K60 4:4:4 receiver or a DMPS Lite HD-PS Series switcher.
Analog Audio De-Embedding (Certain Models Only)
NOTE: Analog audio de-embedding is applicable to the HD-RXA-4KZ-101 and HD-RXCA-
4KZ-101 receivers only.
The analog audio output port of the HD-RXA-4KZ-101 and HD-RXCA-4KZ-101 enables 2-channel
LPCM audio to be extracted from the AV signal.
S/PDIF Optical Digital Audio Return (Certain Models Only)
NOTE: S/PDIF optical digital audio return is applicable to the HD-TXCA-4KZ-101 transmitter
and HD-RXCA-4KZ-101 receiver only.
The HD-TXCA-4KZ-101 receives S/PDIF optical digital audio from a device (for example, a
display) connected to the S/PDIF optical digital audio input of the HD-RXCA-4KZ-101. The
S/PDIF optical digital audio output of the HD-TXCA-4KZ-101 then transmits the audio to an AV
receiver. Supported S/PDIF digital audio formats are Dolby Digital®, Dolby Digital EX, DTS®, DTS
ES, and LPCM up to 6 channels.
Surface-Mountable or Wall Plate Design
DM Lite transmitters and receivers are available as surface-mountable or wall plate devices.
Surface-mountable devices are designed to be mounted onto a flat surface such as a wall. Wall
plate devices (1 gang and 2 gang) are designed for installation into an electrical box.

Product Manual — Doc. 9259A DM Lite® 4K60 4:4:4 Extenders • 7
Physical Description
The following sections provide information about the front and rear panels of DM Lite 4K60 4:4:4
extenders based on the device type (transmitter or receiver) and form factor (surface-
mountable or wall plate):
lSurface-Mountable Transmitters
lWall Plate Transmitters
lSurface-Mountable Receivers
lWall Plate Receivers
Surface-Mountable Transmitters
This section provides information about the front and rear panels of the following surface-
mountable transmitters:
lHD-TX(A)(C)(CA)-4KZ-1x1 Series
lHD-TX-4KZ-201 and HD-TX-4KZ-401
lHD-TX-4KZ-211-CHGR and HD-TX-4KZ-421-CHGR
HD-TX(A)(C)(CA)-4KZ-1x1 Series Transmitters
HD-TX(A)(C)(CA)-4KZ-1x1 Series transmitters consist of the following:
lHD-TX-4KZ-101
lHD-TXA-4KZ-101
lHD-TXC-4KZ-101
lHD-TXCA-4KZ-101
lHD-TX-4KZ-111
The front and rear panels of the HD-TX(A)(C)(CA)-4KZ-1x1 Series transmitters provide
connectors, controls, and indicators as discussed in the following sections.

8 • DM Lite® 4K60 4:4:4 Extenders Product Manual — Doc. 9259A
Front Panel
The following illustration shows the front panel of each of the HD-TX(A)(C)(CA)-4KZ-1x1 Series
transmitters.
HD-TX(A)(C)(CA)-4KZ-1x1 Series Transmitters, Front Panel
①OPTICAL OUT Port: JIS F05 female, TOSLINK® optical fiber connector;
S/PDIF optical digital audio output, functional only when the HD-TXCA-4KZ-101
transmitter is used with the HD-RXCA-4KZ-101 receiver
②AUDIO IN LED: Green LED, indicates that analog audio is selected
③AUDIO IN Port: 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level audio input;
Input Impedance: 24k Ohms balanced/unbalanced;
Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced

Product Manual — Doc. 9259A DM Lite® 4K60 4:4:4 Extenders • 9
④COM Port: 3-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Passes RS-232 TD/RD data to/from the COM port on a DM Lite receiver;
Supports up to 115.2k baud
⑤IR IN/OUT Ports: 4-pin 3.5 mm detachable terminal block;
Comprised of (1) IR input port and (1) IR output port;
IR IN passes the IR input signal to the IR OUT port on the DM Lite receiver;
IR OUT transmits the IR signal from the IR IN port on the DM Lite receiver;
Supports IR up to 60 kHz
⑥LINK LED: Green LED, indicates that a DM Lite link is established
⑦PWR LED: Lights to indicate that power is being applied to the device. Amber indicates
that the device is booting. Green indicates that the device is operational.

10 • DM Lite® 4K60 4:4:4 Extenders Product Manual — Doc. 9259A
Rear Panel
The following illustration shows the rear panel of each of the HD-TX(A)(C)(CA)-4KZ-1x1 Series
transmitters.
HD-TX(A)(C)(CA)-4KZ-1x1 Series Transmitters, Rear Panel
①Ground: Chassis ground lug
②24V 1.25A Power Connector: 2.1 x 5.5 mm DC power connector;
24VDC power input;
PW-2420RU power pack included

Product Manual — Doc. 9259A DM Lite® 4K60 4:4:4 Extenders • 11
③DM LITE OUT Port: 8-pin RJ-45 yellow connector, female, shielded;
DM Lite output port for connection to the DM Lite input port of a DM Lite receiver or
DMPS Lite™ switcher;
Green LED indicates that a DM Lite link is established;
Flashing amber LED indicates non-HDCP video, and solid amber indicates HDCP video
④HDMI IN Port: HDMI Type A connector, female;
HDMI digital video/audio input;
DVI and Dual-Mode DisplayPort™ interface compatible with appropriate adapter or
interface cable (CBL-HD-DVI interface cables sold separately)
⑤HDMI IN LED: Green LED, indicates that the device is receiving an HDMI signal
⑥AUDIO, HDMI IN LED: Green LED, indicates that HDMI audio is selected
⑦AUDIO SELECT: Push button, enables selection of HDMI or analog audio
⑧USB IN Port: USB Type-C® connector, female;
Digital video/audio input using DisplayPort Alt Mode (CBL-USB3G1-C-C-6 and CBL-
USB3G2-C-C-3 cables sold separately)
⑨USB IN LED: Green LED, lights to indicate that the device is receiving a DisplayPort over
USB-C (DisplayPort Alt Mode) input signal

12 • DM Lite® 4K60 4:4:4 Extenders Product Manual — Doc. 9259A
HD-TX-4KZ-201 and HD-TX-4KZ-401
The front and rear panels of the HD-TX-4KZ-201 and HD-TX-4KZ-401 transmitters provide
connectors, controls, and indicators as discussed in the following sections.
Front Panel
The following illustration shows the front panel of the HD-TX-4KZ-201 and HD-TX-4KZ-401
transmitters.
HD-TX-4KZ-201 and HD-TX-4KZ-401 Transmitters, Front Panel
①PWR LED: Lights to indicate that power is being applied to the device. Amber indicates
that the device is booting. Green indicates that the device is operational.
②AUTO LED and Push Button: Green LED, lights to indicate that automatic switching of
inputs is enabled;
Push button, enables or disables automatic switching of inputs
③SETUP LED and Push Button: Red LED, lights to indicate that the SETUP push button is
pressed;
Push button, enables Ethernet setup, applicable only when the device is used with a
DMPS Lite switcher
④INPUT 1-2 or 1-4 LEDs and Push Buttons: LEDs, green indicates that the corresponding
HDMI input is routed to the output, and amber indicates that a source is detected but is
not routed to the output.;
Push buttons, enable manual selection of HDMI input
⑤SERVICE: USB 2.0 Type-A connector, female;
Used for firmware loading, configuration management, or as a USB host port for one
TT-100 series cable caddy (sold separately);
Can also provide up to 5V 500 mA power to a USB powered device

Product Manual — Doc. 9259A DM Lite® 4K60 4:4:4 Extenders • 13
Rear Panel
The following illustration shows the rear panel of the HD-TX-4KZ-201 and HD-TX-4KZ-401
transmitters.
HD-TX-4KZ-201 and HD-TX-4KZ-401 Transmitters, Rear Panel
①24V 2.5A Power Connector: 2.1 x 5.5 mm DC power connector;
24VDC power input;
PW-2420RU power pack included
②DM LITE OUT Port: 8-pin RJ-45 yellow connector, female, shielded;
DM Lite output port for connection to the DM Lite input port of a DM Lite receiver or
DMPS Lite™ switcher;
Green LED indicates that a DM Lite link is established;
Flashing amber LED indicates non-HDCP video, and solid amber indicates HDCP video
③HDMI IN 1-2 or 1-4 Ports: HDMI Type A connectors, female;
HDMI digital video/audio inputs;
DVI and Dual-Mode DisplayPort™ interface compatible with appropriate adapter or
interface cable (CBL-HD-DVI interface cables sold separately)
④Ground: Chassis ground lug

14 • DM Lite® 4K60 4:4:4 Extenders Product Manual — Doc. 9259A
HD-TX-4KZ-211-CHGR and HD-TX-4KZ-421-CHGR
The front and rear panels of the HD-TX-4KZ-211-CHGR and HD-TX-4KZ-421-CHGR provide
connectors, controls, and indicators as discussed in the following sections.
Front Panel
The following illustration shows the front panel of the HD-TX-4KZ-211-CHGR and HD-TX-4KZ-
421-CHGR transmitters.
HD-TX-4KZ-211-CHGR and HD-TX-4KZ-421-CHGR Transmitters, Front Panel
①PWR LED: Lights to indicate that power is being applied to the device. Amber indicates
that the device is booting. Green indicates that the device is operational.
②AUTO LED and Push Button: Green LED, lights to indicate that automatic switching of
inputs is enabled;
Push button, enables or disables automatic switching of inputs
③SETUP LED and Push Button: Red LED, lights to indicate that the SETUP push button is
pressed;
Push button, enables Ethernet setup, applicable only when the device is used with a
DMPS Lite switcher
④INPUT 1 or 1-2 LEDs and Push Buttons: LEDs, green indicates that the corresponding
HDMI input is routed to the output, and amber indicates that a source is detected but is
not routed to the output;
Push buttons, enable manual selection of HDMI input
⑤INPUT 3 or 3-4 LEDs and Push Buttons: LEDs, green indicates that the corresponding
USB-C DisplayPort input is routed to the output, and amber indicates that a source is
detected but is not routed to the output;
Push buttons, enable manual selection of USB-C DisplayPort input

Product Manual — Doc. 9259A DM Lite® 4K60 4:4:4 Extenders • 15
⑥SERVICE: USB 2.0 Type-A connector, female;
Used for firmware loading, configuration management, or as a USB host port for one
TT-100 series cable caddy (sold separately);
Can also provide up to 5V 500 mA power to a USB powered device
Rear Panel
The following illustration shows the rear panel of the HD-TX-4KZ-211-CHGR and HD-TX-4KZ-
421-CHGR transmitters.
HD-TX-4KZ-211-CHGR and HD-TX-4KZ-421-CHGR Transmitters, Rear Panel
①24V 7.5A Power Connector: 2.5 x 5.5 mm DC power connector;
24VDC power input;
PW-2475DU power pack included
②DM LITE OUT Port: 8-pin RJ-45 yellow connector, female, shielded;
DM Lite output port for connection to the DM Lite input port of a DM Lite receiver or
DMPS Lite™ switcher;
Green LED indicates that a DM Lite link is established;
Flashing amber LED indicates non-HDCP video, and solid amber indicates HDCP video
③HDMI INPUT 1 or 1-2 Ports: HDMI Type A connectors, female;
HDMI digital video/audio inputs;
DVI and Dual-Mode DisplayPort™ interface compatible with appropriate adapter or
interface cable (CBL-HD-DVI interface cables sold separately)
④60W USB INPUT 2 or 3-4 Ports: USB Type-C® connectors, female;
Digital video/audio inputs using DisplayPort Alt Mode;
Each input can also charge connected AV source with up to 60W of power

16 • DM Lite® 4K60 4:4:4 Extenders Product Manual — Doc. 9259A
NOTE: In order for a USB-C DisplayPort input to charge the connected AV source,
the DM Lite transmitter must be powered by the included power pack. If the device
is powered by a remote DM Lite receiver or DMPS Lite switcher, no charging
capability is provided by the USB-C input.
⑤Ground: Chassis ground lug
Wall Plate Transmitters
This section provides information about the front and rear of the HD-TX(A)(C)-4KZ-1x1-1G
Series and the HD-TX-4KZ-211-2G wall plate transmitters.
HD-TX(A)(C)-4KZ-1x1-1G Series
HD-TX(A)(C)-4KZ-1x1-1G Series transmitters consist of the following:
lHD-TX-4KZ-101-1G
lHD-TXA-4KZ-101-1G
lHD-TXC-4KZ-101-1G
lHD-TX-4KZ-111-1G
The front and rear of the HD-TX(A)(C)-4KZ-1x1-1G Series transmitters provide connectors,
controls, and indicators as discussed in the following sections.