CrimeStopper Rage CS-2009 User manual

CS-9707DC,9709DC,9711RSPROGRAMMABLEOPTIONS
1.Turnthe ignition on.
2.Waitatleast(1)second,then press the override/programbutton the numberoftimesthat
correspondstothe featureyou wanttochange.(See the listbelow)The siren will chirp
onceforeachbutton press.
3.Press button #1 or#2 on the transmittertochange the option.The siren will chirponcefor
Button #1 ortwiceforButton #2 toconfirmprogramming.
4.Change eachoption individually.Repeatthesestepsasneeded.
PROGRAMMINGOPTIONSCHART
Option #Option Description Press Button
#1 Press Button #2
1PassiveArming ON*OFF
2AutoLock withIgnition ON*OFF
3SilentArm/Disarm(Button1)ONOFF*
4DoorsLock w/PassiveArmON*OFF
5Lightson withdisarmONOFF*
6ActiveRe-ArmONOFF*
7DisarmwithRemoteOutput1ON*OFF
8RemoteOutput2/MAP SwitchMAP Rem.Out2*
9DoorOpen Warning Delay8Sec.*60 Sec.
10 VehicleAssignmentVEH#1*VEH#2
11 DoubleUnlock PulseONOFF*
*=IndicatesFactoryPreset(Default)Vales
________________________________________________________________
REMOTETRANSMITTERPROGRAMMINGNote:Thesystemcanlearnup to4different
codes max.
1.HavesystemDISARMED/UNLOCKand Ignition OFF beforeattempting thesesteps.
2.TurnIgnition ONand OFF 3timesquickly,leaving itONthe lasttime.(ON/OFF,ON/OFF,
ON)You shouldhear(1)shortchirp.
3.Waitatleast2seconds,then pushand releasethe Program/Override Button once.The
siren shouldchirp(4)timesforconfirmation.The systemisnowinprogramming mode.
4.Press the #1 Button (Larger) on transmittertwice.Siren will chirptoconfirmcode learnon
the second press.
5.Turnoff Ignition and waitabout10 secondsbeforetrying the remote.RepeatSteps2-5for
anothertransmitter.The systemwill learnup to4remotes.