Crivit 14141 User manual

GB/IE/NI
GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI
Operation
Switching on /off
The headlight 6has three brightnesses.
On/Off switch 4
press once Automatic mode:
The light intensity adapts automatically to ambient lighting conditions. When automatic
mode is switched on 5the switch flashes green.
press twice Power mode (50 Lux) for riding in unlit areas
press three times Standard mode (25 Lux) for riding in lit areas
press four times Eco mode (10 Lux) for riding in well lit areas
press five times power off
Tail light with brake indicator function
press once Day-mode:
Tail light is off. Brake indicator function is active. Day-mode display
13b
flashes green.
press twice Night-mode:
Tail light is on. Brake indicator function is active.
press three times power off
Charging the headlight /tail light (see Fig. D + E)
Remove the rubber cover from the battery charging socket 17 and connect the USB cable 16 to the
battery charging socket 17 .
Then connect the USB plug of the USB cable 16 to a computer/laptop/standard USB charger with
5V DC and 500–1000mA. Using chargers with different specifications can damage the rechargeable
battery, thus the headlight. Doing so will void the warranty.
The headlight
6
and tail light
14
feature a battery indicator. If the indicator lights up red, the rechargea ble
batteries are drained. The indicator will light up green whilst charging. When the rechargeable batteries
are ready to be used again, the indicator will go out and you can use the headlight
6
and tail light
14
.
For the built-in rechargeable battery to operate at full power, please do not charge the headlight rec harge-
able battery for less than 6 hours the first time (tail light: no less than 5 hours). Please do not stop charg-
ing sooner, even if the LED is already extinguished. After this, a charging time of approx. 3.5 hours is
recommended for the headlight (recommended charging time for the tail light is 2.5 hours).
Cleaning and care
Never fully immerse the lights. Do not use corrosive or abrasive cleaning agents. Doing so will damage
the lights.
Clean the LED bicycle light set with a slightly damp, lint-free cloth.
Safety instructions for rechargeable batteries
CAUTION! EXPLOSION HAZARD! Keep rechargeable batteries away from
children, do not throw rechargeable batteries into fire, do not short-circuit and do
not take apart.
Failure to observe this instruction may result in the rechargeable batteries discharging beyond
their end voltage. This poses a risk of leaking.
Avoid contact with the skin, eyes and mucous membranes if fluid has leaked from the recharge-
able batteries. In the event of contact with battery acid, thoroughly flush the affected area
with clean water and seek immediate medical attention.
Note: If the red rechargeable battery control light 5,13 on the headlight 6or the tail
light 14 lights up,please recharge the rechargeable batteries immediately.
Please note, once the rechargeable battery control system lights up, the lights no longer
comply with the Road Traffic Act.
Installation
Installing the headlight (see Fig. A)
Unscrew the retaining screw 3from the bracket 1.
Position the bracket 1in the desired location on the handlebar. If necessary, use the reducer
rubbers 2to ensure an optimal fit.
Reinstall the retaining screw 3.
Tighten the screw hand tight. To prevent damage, do not use tools for this step.
To adjust to the optimal angle to the direction of travel, loosen the angle adjustment screw 72–3 turns
using a cross-tip screwdriver.
Adjust to the desired angle and tighten the angle adjustment screw 7.
Slide the headlight 6into the bracket 1until you hear it lock into place.
To release, press the headlight lock 8and slide the headlight 6forward out of the bracket 1.
ATTENTION! Routinely verify the headlamp adjustment. The light cone must point straight ahead, in
the direction of travel, and must not be adjusted too high so as not to blind oncoming traffic.
Installing the tail light (see Fig. B + C)
Secure the bracket 9to the seat post or the rear cross-bar using the rubber tab 11 . Be sure there are
no objects in front of the tail light 14 .
Tighten and hook in the rubber tab 11 .
Loosen the retaining screw 15 on the bracket 9and adjust to desired angle.
Then tighten the screw. Tighten the screw hand tight. To prevent damage, do not use tools for this step.
Slide the tail light 14 into the bracket 9until you hear it lock into place.
To remove the tail light 14 press the tail light locking mechanism 10 and take off the tail light 14 .
ATTENTION!The tail lamp must be installed and adjusted so the reference axis is parallel to the median
longitudinal plane of the vehicle and parallel to the road.
9Tail light bracket
10 Tail light lock
11 Tail light bracket rubber tab
12 Tail light on/off switch
13a
Tail light rechargeable battery control system
13b
Day-mode display
14 Tail light
15 Retaining screw tail light holder
16 USB cable
17 Rechargeable battery charging socket
(front and rear lights)
Scope of delivery
1 Headlight
1 Tail light
1 Headlight bracket
1 Tail light bracket
Reducer rubbers
1 USB cable
1 Instructions for assembly and use
Technical data
Headlight (auto-dimming)
Model designation: LI-2A/XC-195S
Rated output: 1W
Protection type: IP44 according to
DIN EN 60529
Rechargeable
Li-ion battery: 1300mAh, 3.7V
Tail light
Model designation: LR-1B/XC-242P
Rated output: 0.2W
Protection type: IP44 according to
DIN EN 60529
Rechargeable
Li-ion battery: 300mAh, 3.7V
Safety instructions
DANGER TO LIFE AND RISK OF ACCIDENT FOR IN-
FANTS AND CHILDREN! Never leave children unsupervised with the packing
material due to the suffocation hazard posed by swallowing parts thereof. Children
frequently underestimate the dangers.
Always keep the product away from children. This product is not a toy!
This product may be used by children 8 years and up as well as by persons with physical,
sensory or mental impairments or lacking experience and knowledge, when supervised or
instructed in the safe use of the product and understand the associated risks. Do not allow
children to play with the product. Cleaning and user maintenance must not be performed by
children without supervision. Please note, damages caused by incorrect handling, non-com-
pliance with the operating instructions or interference with the device by unauthorised indi-
viduals are excluded.
Never take the product apart. Improper repairs can put the user in considerable danger.
Repairs should only be carried out by specialist personnel. The LED lights are not replaceable.
RISK OF LOSS OF LIFE AND ACCIDENT! Using the incorrect charger
may cause the headlight 6and the tail light 14 to be damaged, overheat or even explode.
Doing so will void the warranty.
List of pictograms used
Read the instructions!
Improper disposal of rechargeable
batteries may result in environmental
damage!
Danger to life and risk of accident
for infants and children!
USB – Universal Serial Bus – Connection
port, e.g. on a computer (charging only).
Observe the warnings and safety
notices! K XXXXX
German Federal Motor Transport
Authority test symbol (K followed by
approval number).
Caution! Explosion hazard!
Product and packaging should be
disposed in an environmentally friendly
manner.
Green Dot - Packaging recycling. 21
PAP
Recycling code for cardboard disposal.
Symbol identifying electrical and
electronic devices.
Product meets the applicable European
product-specific directives
LED Bike light set
Introduction
Congratulations on the purchase of your new device. In doing so you have chosen a top-quality
product. The instructions for use are to be considered as part of this product. It contains important
safety, assembly and disposal information. Before using the product, please familiarise yourself
with all the safety information and instructions for use. The product must only be used as described and for
the specified fields of application. If you pass the product on to anyone else, please be sure to also include
all documentation.
Intended use
This product is suitable for lighting the roadway whilst cycling. The LED Bicycle Light Set is approved as ex-
clusive lighting for all bicycles. Light distribution must not be impaired by other bicycle parts or luggage. The
product is intended for outdoor use. Any use other than the aforementioned or any product modification is
prohibited and can result in injuries and product damage. The manufacturer is not liable for damages result-
ing from improper use. This product is not intended for commercial use.
Parts description
1Headlight bracket
2Reducer rubber
3Headlight bracket retaining screw
4Headlight on/off switch
5Headlight rechargeable battery control system
with integrated automatic mode indicator
6Headlight
7Headlight angle adjustment screw
8Headlight lock
Disposal
The packaging is made of environmentally friendly materials, which may be disposed
of through your local recycling facilities.
Contact your local refuse disposal authority for more details on how to dispose of your worn-out product.
To help protect the environment, please dispose of the product properly, not without household
waste, when it has reached the end of its useful life. Please contact your local authority for infor-
mation on collection points and their opening hours.
Defective or old rechargeable batteries must be recycled in accordance with Directive 2006/66/EC and
its amendments. Return rechargeable batteries and/or the device to the recycling facilities provided.
Improper disposal of rechargeable batteries may
result in environmental damage!
Rechargeable batteries may not be disposed with household waste. They may contain toxic heavy metals and
are subject to hazardous waste regulations. The chemical symbols of the heavy metals are: Cd = cadmium,
Hg = mercury, Pb = lead. For this reason, dispose of used rechargeable batteries at a local collection point.
Improper rechargeable battery disposal destroys valuable resources and the hazardous substances in the
rechargeable batteries may pose a significant danger to human health and environment. Separate collection/
disposal of old rechargeable batteries prevents dangers to human health and environment, and valuable
resources regained by recycling.
Warranty
Dear customer,
This device is covered by a 3-year warranty from the date of purchase. In the event of product defects, you
have legal rights against the retailer of this product. Your statutory rights are not limited in any way by our
warranty detailed below.
Warranty terms
The warranty period begins on the date of purchase. Please retain the original receipt safely. This documen-
tation is required as the proof of purchase. Should a defect in material or manufacture occur within three
years from the date of purchase of this product, we will repair or replace - at our choice - it free of charge.
This warranty is conditional on the defective device and the receipt of purchase being presented within the
three year warranty period, and that there is a brief written description of the nature of the defect and of the
date it arose. If the defect is covered by our warranty, you will receive the repaired product or a replacement.
A repair or exchange of the device does not extend a new warranty period. The warranty period will not be
extended by repairs made under warranty. This also applies to replaced and repaired parts. Any damage
or defects present at the time of purchase must be reported immediately after unpacking. Repairs made after
the expiration of the warranty period are subject to payment.
Item No. 14141
A
2
1
6
4 5
8
7
3
ESC F1
~
`
!
1
F2
@
TAB
CAPS
E
lock
lock
C
~
`
ESC
F1
!
1
F2
@
TAB
CAPS
D
17
16
lock
B
14
15
12 13a 13b
11
9
10
17
16
IAN 294079
LED BIKE LIGHT SET
LED BIKE LIGHT SET
Operation and Safety Notes
LED-FAHRRADLEUCHTEN-SET
Bedienungs- und Sicherheitshinweise

GB/IE/NI
GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI
Operation
Switching on/ off
The headlight 6has three brightnesses.
On/Off switch 4
press once Automatic mode:
The light intensity adapts automatically to ambient lighting conditions. When automatic
mode is switched on 5the switch flashes green.
press twice Power mode (50 Lux) for riding in unlit areas
press three times Standard mode (25 Lux) for riding in lit areas
press four times Eco mode (10 Lux) for riding in well lit areas
press five times power off
Tail light with brake indicator function
press once Day-mode:
Tail light is off. Brake indicator function is active. Day-mode display
13b
flashes green.
press twice Night-mode:
Tail light is on. Brake indicator function is active.
press three times power off
Charging the headlight /tail light (see Fig. D + E)
Remove the rubber cover from the battery charging socket 17 and connect the USB cable 16 to the
battery charging socket 17 .
Then connect the USB plug of the USB cable 16 to a computer / laptop / standard USB charger with
5V DC and 500–1000mA. Using chargers with different specifications can damage the rechargeable
battery, thus the headlight. Doing so will void the warranty.
The headlight
6
and tail light
14
feature a battery indicator. If the indicator lights up red, the rechargea ble
batteries are drained. The indicator will light up green whilst charging. When the rechargeable batteries
are ready to be used again, the indicator will go out and you can use the headlight
6
and tail light
14
.
For the built-in rechargeable battery to operate at full power, please do not charge the headlight rec harge-
able battery for less than 6 hours the first time (tail light: no less than 5 hours). Please do not stop charg-
ing sooner, even if the LED is already extinguished. After this, a charging time of approx. 3.5 hours is
recommended for the headlight (recommended charging time for the tail light is 2.5 hours).
Cleaning and care
Never fully immerse the lights. Do not use corrosive or abrasive cleaning agents. Doing so will damage
the lights.
Clean the LED bicycle light set with a slightly damp, lint-free cloth.
Safety instructions for rechargeable batteries
CAUTION! EXPLOSION HAZARD! Keep rechargeable batteries away from
children, do not throw rechargeable batteries into fire, do not short-circuit and do
not take apart.
Failure to observe this instruction may result in the rechargeable batteries discharging beyond
their end voltage. This poses a risk of leaking.
Avoid contact with the skin, eyes and mucous membranes if fluid has leaked from the recharge-
able batteries. In the event of contact with battery acid, thoroughly flush the affected area
with clean water and seek immediate medical attention.
Note: If the red rechargeable battery control light 5,13 on the headlight 6or the tail
light 14 lights up,please recharge the rechargeable batteries immediately.
Please note, once the rechargeable battery control system lights up, the lights no longer
comply with the Road Traffic Act.
Installation
Installing the headlight (see Fig. A)
Unscrew the retaining screw 3from the bracket 1.
Position the bracket 1in the desired location on the handlebar. If necessary, use the reducer
rubbers 2to ensure an optimal fit.
Reinstall the retaining screw 3.
Tighten the screw hand tight. To prevent damage, do not use tools for this step.
To adjust to the optimal angle to the direction of travel, loosen the angle adjustment screw 72–3 turns
using a cross-tip screwdriver.
Adjust to the desired angle and tighten the angle adjustment screw 7.
Slide the headlight 6into the bracket 1until you hear it lock into place.
To release, press the headlight lock 8and slide the headlight 6forward out of the bracket 1.
ATTENTION! Routinely verify the headlamp adjustment. The light cone must point straight ahead, in
the direction of travel, and must not be adjusted too high so as not to blind oncoming traffic.
Installing the tail light (see Fig. B + C)
Secure the bracket 9to the seat post or the rear cross-bar using the rubber tab 11 . Be sure there are
no objects in front of the tail light 14 .
Tighten and hook in the rubber tab 11 .
Loosen the retaining screw 15 on the bracket 9and adjust to desired angle.
Then tighten the screw. Tighten the screw hand tight. To prevent damage, do not use tools for this step.
Slide the tail light 14 into the bracket 9until you hear it lock into place.
To remove the tail light 14 press the tail light locking mechanism 10 and take off the tail light 14 .
ATTENTION!The tail lamp must be installed and adjusted so the reference axis is parallel to the median
longitudinal plane of the vehicle and parallel to the road.
9Tail light bracket
10 Tail light lock
11 Tail light bracket rubber tab
12 Tail light on/off switch
13a
Tail light rechargeable battery control system
13b
Day-mode display
14 Tail light
15 Retaining screw tail light holder
16 USB cable
17 Rechargeable battery charging socket
(front and rear lights)
Scope of delivery
1 Headlight
1 Tail light
1 Headlight bracket
1 Tail light bracket
Reducer rubbers
1 USB cable
1 Instructions for assembly and use
Technical data
Headlight (auto-dimming)
Model designation: LI-2A / XC-195S
Rated output: 1W
Protection type: IP44 according to
DIN EN 60529
Rechargeable
Li-ion battery: 1300mAh, 3.7V
Tail light
Model designation: LR-1B / XC-242P
Rated output: 0.2W
Protection type: IP44 according to
DIN EN 60529
Rechargeable
Li-ion battery: 300mAh, 3.7V
Safety instructions
DANGER TO LIFE AND RISK OF ACCIDENT FOR IN-
FANTS AND CHILDREN! Never leave children unsupervised with the packing
material due to the suffocation hazard posed by swallowing parts thereof. Children
frequently underestimate the dangers.
Always keep the product away from children. This product is not a toy!
This product may be used by children 8 years and up as well as by persons with physical,
sensory or mental impairments or lacking experience and knowledge, when supervised or
instructed in the safe use of the product and understand the associated risks. Do not allow
children to play with the product. Cleaning and user maintenance must not be performed by
children without supervision. Please note, damages caused by incorrect handling, non-com-
pliance with the operating instructions or interference with the device by unauthorised indi-
viduals are excluded.
Never take the product apart. Improper repairs can put the user in considerable danger.
Repairs should only be carried out by specialist personnel. The LED lights are not replaceable.
RISK OF LOSS OF LIFE AND ACCIDENT! Using the incorrect charger
may cause the headlight 6and the tail light 14 to be damaged, overheat or even explode.
Doing so will void the warranty.
List of pictograms used
Read the instructions!
Improper disposal of rechargeable
batteries may result in environmental
damage!
Danger to life and risk of accident
for infants and children!
USB – Universal Serial Bus – Connection
port, e.g. on a computer (charging only).
Observe the warnings and safety
notices! K XXXXX
German Federal Motor Transport
Authority test symbol (K followed by
approval number).
Caution! Explosion hazard!
Product and packaging should be
disposed in an environmentally friendly
manner.
Green Dot - Packaging recycling. 21
PAP
Recycling code for cardboard disposal.
Symbol identifying electrical and
electronic devices.
Product meets the applicable European
product-specific directives
LED Bike light set
Introduction
Congratulations on the purchase of your new device. In doing so you have chosen a top-quality
product. The instructions for use are to be considered as part of this product. It contains important
safety, assembly and disposal information. Before using the product, please familiarise yourself
with all the safety information and instructions for use. The product must only be used as described and for
the specified fields of application. If you pass the product on to anyone else, please be sure to also include
all documentation.
Intended use
This product is suitable for lighting the roadway whilst cycling. The LED Bicycle Light Set is approved as ex-
clusive lighting for all bicycles. Light distribution must not be impaired by other bicycle parts or luggage. The
product is intended for outdoor use. Any use other than the aforementioned or any product modification is
prohibited and can result in injuries and product damage. The manufacturer is not liable for damages result-
ing from improper use. This product is not intended for commercial use.
Parts description
1Headlight bracket
2Reducer rubber
3Headlight bracket retaining screw
4Headlight on/off switch
5Headlight rechargeable battery control system
with integrated automatic mode indicator
6Headlight
7Headlight angle adjustment screw
8Headlight lock
Disposal
The packaging is made of environmentally friendly materials, which may be disposed
of through your local recycling facilities.
Contact your local refuse disposal authority for more details on how to dispose of your worn-out product.
To help protect the environment, please dispose of the product properly, not without household
waste, when it has reached the end of its useful life. Please contact your local authority for infor-
mation on collection points and their opening hours.
Defective or old rechargeable batteries must be recycled in accordance with Directive 2006/66/EC and
its amendments. Return rechargeable batteries and/or the device to the recycling facilities provided.
Improper disposal of rechargeable batteries may
result in environmental damage!
Rechargeable batteries may not be disposed with household waste. They may contain toxic heavy metals and
are subject to hazardous waste regulations. The chemical symbols of the heavy metals are: Cd = cadmium,
Hg = mercury, Pb = lead. For this reason, dispose of used rechargeable batteries at a local collection point.
Improper rechargeable battery disposal destroys valuable resources and the hazardous substances in the
rechargeable batteries may pose a significant danger to human health and environment. Separate collection/
disposal of old rechargeable batteries prevents dangers to human health and environment, and valuable
resources regained by recycling.
Warranty
Dear customer,
This device is covered by a 3-year warranty from the date of purchase. In the event of product defects, you
have legal rights against the retailer of this product. Your statutory rights are not limited in any way by our
warranty detailed below.
Warranty terms
The warranty period begins on the date of purchase. Please retain the original receipt safely. This documen-
tation is required as the proof of purchase. Should a defect in material or manufacture occur within three
years from the date of purchase of this product, we will repair or replace - at our choice - it free of charge.
This warranty is conditional on the defective device and the receipt of purchase being presented within the
three year warranty period, and that there is a brief written description of the nature of the defect and of the
date it arose. If the defect is covered by our warranty, you will receive the repaired product or a replacement.
A repair or exchange of the device does not extend a new warranty period. The warranty period will not be
extended by repairs made under warranty. This also applies to replaced and repaired parts. Any damage
or defects present at the time of purchase must be reported immediately after unpacking. Repairs made after
the expiration of the warranty period are subject to payment.
Item No. 14141
A
2
1
6
4 5
8
7
3
ESC F1
~
`
!
1
F2
@
TAB
CAPS
E
lock
lock
C
~
`
ESC
F1
!
1
F2
@
TAB
CAPS
D
17
16
lock
B
14
15
12 13a 13b
11
9
10
17
16
IAN 294079
LED BIKE LIGHT SET
LED BIKE LIGHT SET
Operation and Safety Notes
LED-FAHRRADLEUCHTEN-SET
Bedienungs- und Sicherheitshinweise

GB/IE/NI
GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI
Operation
Switching on/ off
The headlight 6has three brightnesses.
On/Off switch 4
press once Automatic mode:
The light intensity adapts automatically to ambient lighting conditions. When automatic
mode is switched on 5the switch flashes green.
press twice Power mode (50 Lux) for riding in unlit areas
press three times Standard mode (25 Lux) for riding in lit areas
press four times Eco mode (10 Lux) for riding in well lit areas
press five times power off
Tail light with brake indicator function
press once Day-mode:
Tail light is off. Brake indicator function is active. Day-mode display
13b
flashes green.
press twice Night-mode:
Tail light is on. Brake indicator function is active.
press three times power off
Charging the headlight /tail light (see Fig. D + E)
Remove the rubber cover from the battery charging socket 17 and connect the USB cable 16 to the
battery charging socket 17 .
Then connect the USB plug of the USB cable 16 to a computer / laptop / standard USB charger with
5V DC and 500–1000mA. Using chargers with different specifications can damage the rechargeable
battery, thus the headlight. Doing so will void the warranty.
The headlight
6
and tail light
14
feature a battery indicator. If the indicator lights up red, the rechargea ble
batteries are drained. The indicator will light up green whilst charging. When the rechargeable batteries
are ready to be used again, the indicator will go out and you can use the headlight
6
and tail light
14
.
For the built-in rechargeable battery to operate at full power, please do not charge the headlight rec harge-
able battery for less than 6 hours the first time (tail light: no less than 5 hours). Please do not stop charg-
ing sooner, even if the LED is already extinguished. After this, a charging time of approx. 3.5 hours is
recommended for the headlight (recommended charging time for the tail light is 2.5 hours).
Cleaning and care
Never fully immerse the lights. Do not use corrosive or abrasive cleaning agents. Doing so will damage
the lights.
Clean the LED bicycle light set with a slightly damp, lint-free cloth.
Safety instructions for rechargeable batteries
CAUTION! EXPLOSION HAZARD! Keep rechargeable batteries away from
children, do not throw rechargeable batteries into fire, do not short-circuit and do
not take apart.
Failure to observe this instruction may result in the rechargeable batteries discharging beyond
their end voltage. This poses a risk of leaking.
Avoid contact with the skin, eyes and mucous membranes if fluid has leaked from the recharge-
able batteries. In the event of contact with battery acid, thoroughly flush the affected area
with clean water and seek immediate medical attention.
Note: If the red rechargeable battery control light 5,13 on the headlight 6or the tail
light 14 lights up,please recharge the rechargeable batteries immediately.
Please note, once the rechargeable battery control system lights up, the lights no longer
comply with the Road Traffic Act.
Installation
Installing the headlight (see Fig. A)
Unscrew the retaining screw 3from the bracket 1.
Position the bracket 1in the desired location on the handlebar. If necessary, use the reducer
rubbers 2to ensure an optimal fit.
Reinstall the retaining screw 3.
Tighten the screw hand tight. To prevent damage, do not use tools for this step.
To adjust to the optimal angle to the direction of travel, loosen the angle adjustment screw 72–3 turns
using a cross-tip screwdriver.
Adjust to the desired angle and tighten the angle adjustment screw 7.
Slide the headlight 6into the bracket 1until you hear it lock into place.
To release, press the headlight lock 8and slide the headlight 6forward out of the bracket 1.
ATTENTION! Routinely verify the headlamp adjustment. The light cone must point straight ahead, in
the direction of travel, and must not be adjusted too high so as not to blind oncoming traffic.
Installing the tail light (see Fig. B + C)
Secure the bracket 9to the seat post or the rear cross-bar using the rubber tab 11 . Be sure there are
no objects in front of the tail light 14 .
Tighten and hook in the rubber tab 11 .
Loosen the retaining screw 15 on the bracket 9and adjust to desired angle.
Then tighten the screw. Tighten the screw hand tight. To prevent damage, do not use tools for this step.
Slide the tail light 14 into the bracket 9until you hear it lock into place.
To remove the tail light 14 press the tail light locking mechanism 10 and take off the tail light 14 .
ATTENTION!The tail lamp must be installed and adjusted so the reference axis is parallel to the median
longitudinal plane of the vehicle and parallel to the road.
9Tail light bracket
10 Tail light lock
11 Tail light bracket rubber tab
12 Tail light on/off switch
13a
Tail light rechargeable battery control system
13b
Day-mode display
14 Tail light
15 Retaining screw tail light holder
16 USB cable
17 Rechargeable battery charging socket
(front and rear lights)
Scope of delivery
1 Headlight
1 Tail light
1 Headlight bracket
1 Tail light bracket
Reducer rubbers
1 USB cable
1 Instructions for assembly and use
Technical data
Headlight (auto-dimming)
Model designation: LI-2A / XC-195S
Rated output: 1W
Protection type: IP44 according to
DIN EN 60529
Rechargeable
Li-ion battery: 1300mAh, 3.7V
Tail light
Model designation: LR-1B / XC-242P
Rated output: 0.2W
Protection type: IP44 according to
DIN EN 60529
Rechargeable
Li-ion battery: 300mAh, 3.7V
Safety instructions
DANGER TO LIFE AND RISK OF ACCIDENT FOR IN-
FANTS AND CHILDREN! Never leave children unsupervised with the packing
material due to the suffocation hazard posed by swallowing parts thereof. Children
frequently underestimate the dangers.
Always keep the product away from children. This product is not a toy!
This product may be used by children 8 years and up as well as by persons with physical,
sensory or mental impairments or lacking experience and knowledge, when supervised or
instructed in the safe use of the product and understand the associated risks. Do not allow
children to play with the product. Cleaning and user maintenance must not be performed by
children without supervision. Please note, damages caused by incorrect handling, non-com-
pliance with the operating instructions or interference with the device by unauthorised indi-
viduals are excluded.
Never take the product apart. Improper repairs can put the user in considerable danger.
Repairs should only be carried out by specialist personnel. The LED lights are not replaceable.
RISK OF LOSS OF LIFE AND ACCIDENT! Using the incorrect charger
may cause the headlight 6and the tail light 14 to be damaged, overheat or even explode.
Doing so will void the warranty.
List of pictograms used
Read the instructions!
Improper disposal of rechargeable
batteries may result in environmental
damage!
Danger to life and risk of accident
for infants and children!
USB – Universal Serial Bus – Connection
port, e.g. on a computer (charging only).
Observe the warnings and safety
notices! K XXXXX
German Federal Motor Transport
Authority test symbol (K followed by
approval number).
Caution! Explosion hazard!
Product and packaging should be
disposed in an environmentally friendly
manner.
Green Dot - Packaging recycling. 21
PAP
Recycling code for cardboard disposal.
Symbol identifying electrical and
electronic devices.
Product meets the applicable European
product-specific directives
LED Bike light set
Introduction
Congratulations on the purchase of your new device. In doing so you have chosen a top-quality
product. The instructions for use are to be considered as part of this product. It contains important
safety, assembly and disposal information. Before using the product, please familiarise yourself
with all the safety information and instructions for use. The product must only be used as described and for
the specified fields of application. If you pass the product on to anyone else, please be sure to also include
all documentation.
Intended use
This product is suitable for lighting the roadway whilst cycling. The LED Bicycle Light Set is approved as ex-
clusive lighting for all bicycles. Light distribution must not be impaired by other bicycle parts or luggage. The
product is intended for outdoor use. Any use other than the aforementioned or any product modification is
prohibited and can result in injuries and product damage. The manufacturer is not liable for damages result-
ing from improper use. This product is not intended for commercial use.
Parts description
1Headlight bracket
2Reducer rubber
3Headlight bracket retaining screw
4Headlight on/off switch
5Headlight rechargeable battery control system
with integrated automatic mode indicator
6Headlight
7Headlight angle adjustment screw
8Headlight lock
Disposal
The packaging is made of environmentally friendly materials, which may be disposed
of through your local recycling facilities.
Contact your local refuse disposal authority for more details on how to dispose of your worn-out product.
To help protect the environment, please dispose of the product properly, not without household
waste, when it has reached the end of its useful life. Please contact your local authority for infor-
mation on collection points and their opening hours.
Defective or old rechargeable batteries must be recycled in accordance with Directive 2006/66/EC and
its amendments. Return rechargeable batteries and/or the device to the recycling facilities provided.
Improper disposal of rechargeable batteries may
result in environmental damage!
Rechargeable batteries may not be disposed with household waste. They may contain toxic heavy metals and
are subject to hazardous waste regulations. The chemical symbols of the heavy metals are: Cd = cadmium,
Hg = mercury, Pb = lead. For this reason, dispose of used rechargeable batteries at a local collection point.
Improper rechargeable battery disposal destroys valuable resources and the hazardous substances in the
rechargeable batteries may pose a significant danger to human health and environment. Separate collection/
disposal of old rechargeable batteries prevents dangers to human health and environment, and valuable
resources regained by recycling.
Warranty
Dear customer,
This device is covered by a 3-year warranty from the date of purchase. In the event of product defects, you
have legal rights against the retailer of this product. Your statutory rights are not limited in any way by our
warranty detailed below.
Warranty terms
The warranty period begins on the date of purchase. Please retain the original receipt safely. This documen-
tation is required as the proof of purchase. Should a defect in material or manufacture occur within three
years from the date of purchase of this product, we will repair or replace - at our choice - it free of charge.
This warranty is conditional on the defective device and the receipt of purchase being presented within the
three year warranty period, and that there is a brief written description of the nature of the defect and of the
date it arose. If the defect is covered by our warranty, you will receive the repaired product or a replacement.
A repair or exchange of the device does not extend a new warranty period. The warranty period will not be
extended by repairs made under warranty. This also applies to replaced and repaired parts. Any damage
or defects present at the time of purchase must be reported immediately after unpacking. Repairs made after
the expiration of the warranty period are subject to payment.
Item No. 14141
A
2
1
6
4 5
8
7
3
ESC F1
~
`
!
1
F2
@
TAB
CAPS
E
lock
lock
C
~
`
ESC
F1
!
1
F2
@
TAB
CAPS
D
17
16
lock
B
14
15
12 13a 13b
11
9
10
17
16
IAN 294079
LED BIKE LIGHT SET
LED BIKE LIGHT SET
Operation and Safety Notes
LED-FAHRRADLEUCHTEN-SET
Bedienungs- und Sicherheitshinweise

GB/IE/NI
GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI
Operation
Switching on /off
The headlight 6has three brightnesses.
On/Off switch 4
press once Automatic mode:
The light intensity adapts automatically to ambient lighting conditions. When automatic
mode is switched on 5the switch flashes green.
press twice Power mode (50 Lux) for riding in unlit areas
press three times Standard mode (25 Lux) for riding in lit areas
press four times Eco mode (10 Lux) for riding in well lit areas
press five times power off
Tail light with brake indicator function
press once Day-mode:
Tail light is off. Brake indicator function is active. Day-mode display
13b
flashes green.
press twice Night-mode:
Tail light is on. Brake indicator function is active.
press three times power off
Charging the headlight /tail light (see Fig. D + E)
Remove the rubber cover from the battery charging socket 17 and connect the USB cable 16 to the
battery charging socket 17 .
Then connect the USB plug of the USB cable 16 to a computer/laptop/standard USB charger with
5V DC and 500–1000mA. Using chargers with different specifications can damage the rechargeable
battery, thus the headlight. Doing so will void the warranty.
The headlight
6
and tail light
14
feature a battery indicator. If the indicator lights up red, the rechargea ble
batteries are drained. The indicator will light up green whilst charging. When the rechargeable batteries
are ready to be used again, the indicator will go out and you can use the headlight
6
and tail light
14
.
For the built-in rechargeable battery to operate at full power, please do not charge the headlight rec harge-
able battery for less than 6 hours the first time (tail light: no less than 5 hours). Please do not stop charg-
ing sooner, even if the LED is already extinguished. After this, a charging time of approx. 3.5 hours is
recommended for the headlight (recommended charging time for the tail light is 2.5 hours).
Cleaning and care
Never fully immerse the lights. Do not use corrosive or abrasive cleaning agents. Doing so will damage
the lights.
Clean the LED bicycle light set with a slightly damp, lint-free cloth.
Safety instructions for rechargeable batteries
CAUTION! EXPLOSION HAZARD! Keep rechargeable batteries away from
children, do not throw rechargeable batteries into fire, do not short-circuit and do
not take apart.
Failure to observe this instruction may result in the rechargeable batteries discharging beyond
their end voltage. This poses a risk of leaking.
Avoid contact with the skin, eyes and mucous membranes if fluid has leaked from the recharge-
able batteries. In the event of contact with battery acid, thoroughly flush the affected area
with clean water and seek immediate medical attention.
Note: If the red rechargeable battery control light 5,13 on the headlight 6or the tail
light 14 lights up,please recharge the rechargeable batteries immediately.
Please note, once the rechargeable battery control system lights up, the lights no longer
comply with the Road Traffic Act.
Installation
Installing the headlight (see Fig. A)
Unscrew the retaining screw 3from the bracket 1.
Position the bracket 1in the desired location on the handlebar. If necessary, use the reducer
rubbers 2to ensure an optimal fit.
Reinstall the retaining screw 3.
Tighten the screw hand tight. To prevent damage, do not use tools for this step.
To adjust to the optimal angle to the direction of travel, loosen the angle adjustment screw 72–3 turns
using a cross-tip screwdriver.
Adjust to the desired angle and tighten the angle adjustment screw 7.
Slide the headlight 6into the bracket 1until you hear it lock into place.
To release, press the headlight lock 8and slide the headlight 6forward out of the bracket 1.
ATTENTION! Routinely verify the headlamp adjustment. The light cone must point straight ahead, in
the direction of travel, and must not be adjusted too high so as not to blind oncoming traffic.
Installing the tail light (see Fig. B + C)
Secure the bracket 9to the seat post or the rear cross-bar using the rubber tab 11 . Be sure there are
no objects in front of the tail light 14 .
Tighten and hook in the rubber tab 11 .
Loosen the retaining screw 15 on the bracket 9and adjust to desired angle.
Then tighten the screw. Tighten the screw hand tight. To prevent damage, do not use tools for this step.
Slide the tail light 14 into the bracket 9until you hear it lock into place.
To remove the tail light 14 press the tail light locking mechanism 10 and take off the tail light 14 .
ATTENTION!The tail lamp must be installed and adjusted so the reference axis is parallel to the median
longitudinal plane of the vehicle and parallel to the road.
9Tail light bracket
10 Tail light lock
11 Tail light bracket rubber tab
12 Tail light on/off switch
13a
Tail light rechargeable battery control system
13b
Day-mode display
14 Tail light
15 Retaining screw tail light holder
16 USB cable
17 Rechargeable battery charging socket
(front and rear lights)
Scope of delivery
1 Headlight
1 Tail light
1 Headlight bracket
1 Tail light bracket
Reducer rubbers
1 USB cable
1 Instructions for assembly and use
Technical data
Headlight (auto-dimming)
Model designation: LI-2A/XC-195S
Rated output: 1 W
Protection type: IP44 according to
DIN EN 60529
Rechargeable
Li-ion battery: 1300 mAh, 3.7 V
Tail light
Model designation: LR-1B / XC-242P
Rated output: 0.2 W
Protection type: IP44 according to
DIN EN 60529
Rechargeable
Li-ion battery: 300 mAh, 3.7 V
Safety instructions
DANGER TO LIFE AND RISK OF ACCIDENT FOR IN-
FANTS AND CHILDREN! Never leave children unsupervised with the packing
material due to the suffocation hazard posed by swallowing parts thereof. Children
frequently underestimate the dangers.
Always keep the product away from children. This product is not a toy!
This product may be used by children 8 years and up as well as by persons with physical,
sensory or mental impairments or lacking experience and knowledge, when supervised or
instructed in the safe use of the product and understand the associated risks. Do not allow
children to play with the product. Cleaning and user maintenance must not be performed by
children without supervision. Please note, damages caused by incorrect handling, non-com-
pliance with the operating instructions or interference with the device by unauthorised indi-
viduals are excluded.
Never take the product apart. Improper repairs can put the user in considerable danger.
Repairs should only be carried out by specialist personnel. The LED lights are not replaceable.
RISK OF LOSS OF LIFE AND ACCIDENT! Using the incorrect charger
may cause the headlight 6and the tail light 14 to be damaged, overheat or even explode.
Doing so will void the warranty.
List of pictograms used
Read the instructions!
Improper disposal of rechargeable
batteries may result in environmental
damage!
Danger to life and risk of accident
for infants and children!
USB – Universal Serial Bus – Connection
port, e.g. on a computer (charging only).
Observe the warnings and safety
notices! K XXXXX
German Federal Motor Transport
Authority test symbol (K followed by
approval number).
Caution! Explosion hazard!
Product and packaging should be
disposed in an environmentally friendly
manner.
Green Dot - Packaging recycling. 21
PAP
Recycling code for cardboard disposal.
Symbol identifying electrical and
electronic devices.
Product meets the applicable European
product-specific directives
LED Bike light set
Introduction
Congratulations on the purchase of your new device. In doing so you have chosen a top-quality
product. The instructions for use are to be considered as part of this product. It contains important
safety, assembly and disposal information. Before using the product, please familiarise yourself
with all the safety information and instructions for use. The product must only be used as described and for
the specified fields of application. If you pass the product on to anyone else, please be sure to also include
all documentation.
Intended use
This product is suitable for lighting the roadway whilst cycling. The LED Bicycle Light Set is approved as ex-
clusive lighting for all bicycles. Light distribution must not be impaired by other bicycle parts or luggage. The
product is intended for outdoor use. Any use other than the aforementioned or any product modification is
prohibited and can result in injuries and product damage. The manufacturer is not liable for damages result-
ing from improper use. This product is not intended for commercial use.
Parts description
1Headlight bracket
2Reducer rubber
3Headlight bracket retaining screw
4Headlight on/off switch
5Headlight rechargeable battery control system
with integrated automatic mode indicator
6Headlight
7Headlight angle adjustment screw
8Headlight lock
Disposal
The packaging is made of environmentally friendly materials, which may be disposed
of through your local recycling facilities.
Contact your local refuse disposal authority for more details on how to dispose of your worn-out product.
To help protect the environment, please dispose of the product properly, not without household
waste, when it has reached the end of its useful life. Please contact your local authority for infor-
mation on collection points and their opening hours.
Defective or old rechargeable batteries must be recycled in accordance with Directive 2006/66/EC and
its amendments. Return rechargeable batteries and/or the device to the recycling facilities provided.
Improper disposal of rechargeable batteries may
result in environmental damage!
Rechargeable batteries may not be disposed with household waste. They may contain toxic heavy metals and
are subject to hazardous waste regulations. The chemical symbols of the heavy metals are: Cd = cadmium,
Hg = mercury, Pb = lead. For this reason, dispose of used rechargeable batteries at a local collection point.
Improper rechargeable battery disposal destroys valuable resources and the hazardous substances in the
rechargeable batteries may pose a significant danger to human health and environment. Separate collection/
disposal of old rechargeable batteries prevents dangers to human health and environment, and valuable
resources regained by recycling.
Warranty
Dear customer,
This device is covered by a 3-year warranty from the date of purchase. In the event of product defects, you
have legal rights against the retailer of this product. Your statutory rights are not limited in any way by our
warranty detailed below.
Warranty terms
The warranty period begins on the date of purchase. Please retain the original receipt safely. This documen-
tation is required as the proof of purchase. Should a defect in material or manufacture occur within three
years from the date of purchase of this product, we will repair or replace - at our choice - it free of charge.
This warranty is conditional on the defective device and the receipt of purchase being presented within the
three year warranty period, and that there is a brief written description of the nature of the defect and of the
date it arose. If the defect is covered by our warranty, you will receive the repaired product or a replacement.
A repair or exchange of the device does not extend a new warranty period. The warranty period will not be
extended by repairs made under warranty. This also applies to replaced and repaired parts. Any damage
or defects present at the time of purchase must be reported immediately after unpacking. Repairs made after
the expiration of the warranty period are subject to payment.
Item No. 14141
A
2
1
6
4 5
8
7
3
ESC F1
~
`
!
1
F2
@
TAB
CAPS
E
lock
lock
C
~
`
ESC
F1
!
1
F2
@
TAB
CAPS
D
17
16
lock
B
14
15
12 13a 13b
11
9
10
17
16
IAN 294079
LED BIKE LIGHT SET
LED BIKE LIGHT SET
Operation and Safety Notes
LED-FAHRRADLEUCHTEN-SET
Bedienungs- und Sicherheitshinweise

GB/IE/NI
GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI
Operation
Switching on /off
The headlight 6has three brightnesses.
On/Off switch 4
press once Automatic mode:
The light intensity adapts automatically to ambient lighting conditions. When automatic
mode is switched on 5the switch flashes green.
press twice Power mode (50 Lux) for riding in unlit areas
press three times Standard mode (25 Lux) for riding in lit areas
press four times Eco mode (10 Lux) for riding in well lit areas
press five times power off
Tail light with brake indicator function
press once Day-mode:
Tail light is off. Brake indicator function is active. Day-mode display
13b
flashes green.
press twice Night-mode:
Tail light is on. Brake indicator function is active.
press three times power off
Charging the headlight /tail light (see Fig. D + E)
Remove the rubber cover from the battery charging socket 17 and connect the USB cable 16 to the
battery charging socket 17 .
Then connect the USB plug of the USB cable 16 to a computer/laptop/standard USB charger with
5V DC and 500–1000mA. Using chargers with different specifications can damage the rechargeable
battery, thus the headlight. Doing so will void the warranty.
The headlight
6
and tail light
14
feature a battery indicator. If the indicator lights up red, the rechargea ble
batteries are drained. The indicator will light up green whilst charging. When the rechargeable batteries
are ready to be used again, the indicator will go out and you can use the headlight
6
and tail light
14
.
For the built-in rechargeable battery to operate at full power, please do not charge the headlight rec harge-
able battery for less than 6 hours the first time (tail light: no less than 5 hours). Please do not stop charg-
ing sooner, even if the LED is already extinguished. After this, a charging time of approx. 3.5 hours is
recommended for the headlight (recommended charging time for the tail light is 2.5 hours).
Cleaning and care
Never fully immerse the lights. Do not use corrosive or abrasive cleaning agents. Doing so will damage
the lights.
Clean the LED bicycle light set with a slightly damp, lint-free cloth.
Safety instructions for rechargeable batteries
CAUTION! EXPLOSION HAZARD! Keep rechargeable batteries away from
children, do not throw rechargeable batteries into fire, do not short-circuit and do
not take apart.
Failure to observe this instruction may result in the rechargeable batteries discharging beyond
their end voltage. This poses a risk of leaking.
Avoid contact with the skin, eyes and mucous membranes if fluid has leaked from the recharge-
able batteries. In the event of contact with battery acid, thoroughly flush the affected area
with clean water and seek immediate medical attention.
Note: If the red rechargeable battery control light 5,13 on the headlight 6or the tail
light 14 lights up,please recharge the rechargeable batteries immediately.
Please note, once the rechargeable battery control system lights up, the lights no longer
comply with the Road Traffic Act.
Installation
Installing the headlight (see Fig. A)
Unscrew the retaining screw 3from the bracket 1.
Position the bracket 1in the desired location on the handlebar. If necessary, use the reducer
rubbers 2to ensure an optimal fit.
Reinstall the retaining screw 3.
Tighten the screw hand tight. To prevent damage, do not use tools for this step.
To adjust to the optimal angle to the direction of travel, loosen the angle adjustment screw 72–3 turns
using a cross-tip screwdriver.
Adjust to the desired angle and tighten the angle adjustment screw 7.
Slide the headlight 6into the bracket 1until you hear it lock into place.
To release, press the headlight lock 8and slide the headlight 6forward out of the bracket 1.
ATTENTION! Routinely verify the headlamp adjustment. The light cone must point straight ahead, in
the direction of travel, and must not be adjusted too high so as not to blind oncoming traffic.
Installing the tail light (see Fig. B + C)
Secure the bracket 9to the seat post or the rear cross-bar using the rubber tab 11 . Be sure there are
no objects in front of the tail light 14 .
Tighten and hook in the rubber tab 11 .
Loosen the retaining screw 15 on the bracket 9and adjust to desired angle.
Then tighten the screw. Tighten the screw hand tight. To prevent damage, do not use tools for this step.
Slide the tail light 14 into the bracket 9until you hear it lock into place.
To remove the tail light 14 press the tail light locking mechanism 10 and take off the tail light 14 .
ATTENTION!The tail lamp must be installed and adjusted so the reference axis is parallel to the median
longitudinal plane of the vehicle and parallel to the road.
9Tail light bracket
10 Tail light lock
11 Tail light bracket rubber tab
12 Tail light on/off switch
13a
Tail light rechargeable battery control system
13b
Day-mode display
14 Tail light
15 Retaining screw tail light holder
16 USB cable
17 Rechargeable battery charging socket
(front and rear lights)
Scope of delivery
1 Headlight
1 Tail light
1 Headlight bracket
1 Tail light bracket
Reducer rubbers
1 USB cable
1 Instructions for assembly and use
Technical data
Headlight (auto-dimming)
Model designation: LI-2A/XC-195S
Rated output: 1W
Protection type: IP44 according to
DIN EN 60529
Rechargeable
Li-ion battery: 1300mAh, 3.7V
Tail light
Model designation: LR-1B/XC-242P
Rated output: 0.2W
Protection type: IP44 according to
DIN EN 60529
Rechargeable
Li-ion battery: 300mAh, 3.7V
Safety instructions
DANGER TO LIFE AND RISK OF ACCIDENT FOR IN-
FANTS AND CHILDREN! Never leave children unsupervised with the packing
material due to the suffocation hazard posed by swallowing parts thereof. Children
frequently underestimate the dangers.
Always keep the product away from children. This product is not a toy!
This product may be used by children 8 years and up as well as by persons with physical,
sensory or mental impairments or lacking experience and knowledge, when supervised or
instructed in the safe use of the product and understand the associated risks. Do not allow
children to play with the product. Cleaning and user maintenance must not be performed by
children without supervision. Please note, damages caused by incorrect handling, non-com-
pliance with the operating instructions or interference with the device by unauthorised indi-
viduals are excluded.
Never take the product apart. Improper repairs can put the user in considerable danger.
Repairs should only be carried out by specialist personnel. The LED lights are not replaceable.
RISK OF LOSS OF LIFE AND ACCIDENT! Using the incorrect charger
may cause the headlight 6and the tail light 14 to be damaged, overheat or even explode.
Doing so will void the warranty.
List of pictograms used
Read the instructions!
Improper disposal of rechargeable
batteries may result in environmental
damage!
Danger to life and risk of accident
for infants and children!
USB – Universal Serial Bus – Connection
port, e.g. on a computer (charging only).
Observe the warnings and safety
notices! K XXXXX
German Federal Motor Transport
Authority test symbol (K followed by
approval number).
Caution! Explosion hazard!
Product and packaging should be
disposed in an environmentally friendly
manner.
Green Dot - Packaging recycling. 21
PAP
Recycling code for cardboard disposal.
Symbol identifying electrical and
electronic devices.
Product meets the applicable European
product-specific directives
LED Bike light set
Introduction
Congratulations on the purchase of your new device. In doing so you have chosen a top-quality
product. The instructions for use are to be considered as part of this product. It contains important
safety, assembly and disposal information. Before using the product, please familiarise yourself
with all the safety information and instructions for use. The product must only be used as described and for
the specified fields of application. If you pass the product on to anyone else, please be sure to also include
all documentation.
Intended use
This product is suitable for lighting the roadway whilst cycling. The LED Bicycle Light Set is approved as ex-
clusive lighting for all bicycles. Light distribution must not be impaired by other bicycle parts or luggage. The
product is intended for outdoor use. Any use other than the aforementioned or any product modification is
prohibited and can result in injuries and product damage. The manufacturer is not liable for damages result-
ing from improper use. This product is not intended for commercial use.
Parts description
1Headlight bracket
2Reducer rubber
3Headlight bracket retaining screw
4Headlight on/off switch
5Headlight rechargeable battery control system
with integrated automatic mode indicator
6Headlight
7Headlight angle adjustment screw
8Headlight lock
Disposal
The packaging is made of environmentally friendly materials, which may be disposed
of through your local recycling facilities.
Contact your local refuse disposal authority for more details on how to dispose of your worn-out product.
To help protect the environment, please dispose of the product properly, not without household
waste, when it has reached the end of its useful life. Please contact your local authority for infor-
mation on collection points and their opening hours.
Defective or old rechargeable batteries must be recycled in accordance with Directive 2006/66/EC and
its amendments. Return rechargeable batteries and/or the device to the recycling facilities provided.
Improper disposal of rechargeable batteries may
result in environmental damage!
Rechargeable batteries may not be disposed with household waste. They may contain toxic heavy metals and
are subject to hazardous waste regulations. The chemical symbols of the heavy metals are: Cd = cadmium,
Hg = mercury, Pb = lead. For this reason, dispose of used rechargeable batteries at a local collection point.
Improper rechargeable battery disposal destroys valuable resources and the hazardous substances in the
rechargeable batteries may pose a significant danger to human health and environment. Separate collection/
disposal of old rechargeable batteries prevents dangers to human health and environment, and valuable
resources regained by recycling.
Warranty
Dear customer,
This device is covered by a 3-year warranty from the date of purchase. In the event of product defects, you
have legal rights against the retailer of this product. Your statutory rights are not limited in any way by our
warranty detailed below.
Warranty terms
The warranty period begins on the date of purchase. Please retain the original receipt safely. This documen-
tation is required as the proof of purchase. Should a defect in material or manufacture occur within three
years from the date of purchase of this product, we will repair or replace - at our choice - it free of charge.
This warranty is conditional on the defective device and the receipt of purchase being presented within the
three year warranty period, and that there is a brief written description of the nature of the defect and of the
date it arose. If the defect is covered by our warranty, you will receive the repaired product or a replacement.
A repair or exchange of the device does not extend a new warranty period. The warranty period will not be
extended by repairs made under warranty. This also applies to replaced and repaired parts. Any damage
or defects present at the time of purchase must be reported immediately after unpacking. Repairs made after
the expiration of the warranty period are subject to payment.
Item No. 14141
A
2
1
6
4 5
8
7
3
ESC F1
~
`
!
1
F2
@
TAB
CAPS
E
lock
lock
C
~
`
ESC
F1
!
1
F2
@
TAB
CAPS
D
17
16
lock
B
14
15
12 13a 13b
11
9
10
17
16
IAN 294079
LED BIKE LIGHT SET
LED BIKE LIGHT SET
Operation and Safety Notes
LED-FAHRRADLEUCHTEN-SET
Bedienungs- und Sicherheitshinweise

GB/IE/NI
GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI
Operation
Switching on/ off
The headlight 6has three brightnesses.
On/Off switch 4
press once Automatic mode:
The light intensity adapts automatically to ambient lighting conditions. When automatic
mode is switched on 5the switch flashes green.
press twice Power mode (50 Lux) for riding in unlit areas
press three times Standard mode (25 Lux) for riding in lit areas
press four times Eco mode (10 Lux) for riding in well lit areas
press five times power off
Tail light with brake indicator function
press once Day-mode:
Tail light is off. Brake indicator function is active. Day-mode display
13b
flashes green.
press twice Night-mode:
Tail light is on. Brake indicator function is active.
press three times power off
Charging the headlight /tail light (see Fig. D + E)
Remove the rubber cover from the battery charging socket 17 and connect the USB cable 16 to the
battery charging socket 17 .
Then connect the USB plug of the USB cable 16 to a computer / laptop / standard USB charger with
5V DC and 500–1000mA. Using chargers with different specifications can damage the rechargeable
battery, thus the headlight. Doing so will void the warranty.
The headlight
6
and tail light
14
feature a battery indicator. If the indicator lights up red, the rechargea ble
batteries are drained. The indicator will light up green whilst charging. When the rechargeable batteries
are ready to be used again, the indicator will go out and you can use the headlight
6
and tail light
14
.
For the built-in rechargeable battery to operate at full power, please do not charge the headlight rec harge-
able battery for less than 6 hours the first time (tail light: no less than 5 hours). Please do not stop charg-
ing sooner, even if the LED is already extinguished. After this, a charging time of approx. 3.5 hours is
recommended for the headlight (recommended charging time for the tail light is 2.5 hours).
Cleaning and care
Never fully immerse the lights. Do not use corrosive or abrasive cleaning agents. Doing so will damage
the lights.
Clean the LED bicycle light set with a slightly damp, lint-free cloth.
Safety instructions for rechargeable batteries
CAUTION! EXPLOSION HAZARD! Keep rechargeable batteries away from
children, do not throw rechargeable batteries into fire, do not short-circuit and do
not take apart.
Failure to observe this instruction may result in the rechargeable batteries discharging beyond
their end voltage. This poses a risk of leaking.
Avoid contact with the skin, eyes and mucous membranes if fluid has leaked from the recharge-
able batteries. In the event of contact with battery acid, thoroughly flush the affected area
with clean water and seek immediate medical attention.
Note: If the red rechargeable battery control light 5,13 on the headlight 6or the tail
light 14 lights up,please recharge the rechargeable batteries immediately.
Please note, once the rechargeable battery control system lights up, the lights no longer
comply with the Road Traffic Act.
Installation
Installing the headlight (see Fig. A)
Unscrew the retaining screw 3from the bracket 1.
Position the bracket 1in the desired location on the handlebar. If necessary, use the reducer
rubbers 2to ensure an optimal fit.
Reinstall the retaining screw 3.
Tighten the screw hand tight. To prevent damage, do not use tools for this step.
To adjust to the optimal angle to the direction of travel, loosen the angle adjustment screw 72–3 turns
using a cross-tip screwdriver.
Adjust to the desired angle and tighten the angle adjustment screw 7.
Slide the headlight 6into the bracket 1until you hear it lock into place.
To release, press the headlight lock 8and slide the headlight 6forward out of the bracket 1.
ATTENTION! Routinely verify the headlamp adjustment. The light cone must point straight ahead, in
the direction of travel, and must not be adjusted too high so as not to blind oncoming traffic.
Installing the tail light (see Fig. B + C)
Secure the bracket 9to the seat post or the rear cross-bar using the rubber tab 11 . Be sure there are
no objects in front of the tail light 14 .
Tighten and hook in the rubber tab 11 .
Loosen the retaining screw 15 on the bracket 9and adjust to desired angle.
Then tighten the screw. Tighten the screw hand tight. To prevent damage, do not use tools for this step.
Slide the tail light 14 into the bracket 9until you hear it lock into place.
To remove the tail light 14 press the tail light locking mechanism 10 and take off the tail light 14 .
ATTENTION!The tail lamp must be installed and adjusted so the reference axis is parallel to the median
longitudinal plane of the vehicle and parallel to the road.
9Tail light bracket
10 Tail light lock
11 Tail light bracket rubber tab
12 Tail light on/off switch
13a
Tail light rechargeable battery control system
13b
Day-mode display
14 Tail light
15 Retaining screw tail light holder
16 USB cable
17 Rechargeable battery charging socket
(front and rear lights)
Scope of delivery
1 Headlight
1 Tail light
1 Headlight bracket
1 Tail light bracket
Reducer rubbers
1 USB cable
1 Instructions for assembly and use
Technical data
Headlight (auto-dimming)
Model designation: LI-2A / XC-195S
Rated output: 1W
Protection type: IP44 according to
DIN EN 60529
Rechargeable
Li-ion battery: 1300mAh, 3.7V
Tail light
Model designation: LR-1B / XC-242P
Rated output: 0.2W
Protection type: IP44 according to
DIN EN 60529
Rechargeable
Li-ion battery: 300mAh, 3.7V
Safety instructions
DANGER TO LIFE AND RISK OF ACCIDENT FOR IN-
FANTS AND CHILDREN! Never leave children unsupervised with the packing
material due to the suffocation hazard posed by swallowing parts thereof. Children
frequently underestimate the dangers.
Always keep the product away from children. This product is not a toy!
This product may be used by children 8 years and up as well as by persons with physical,
sensory or mental impairments or lacking experience and knowledge, when supervised or
instructed in the safe use of the product and understand the associated risks. Do not allow
children to play with the product. Cleaning and user maintenance must not be performed by
children without supervision. Please note, damages caused by incorrect handling, non-com-
pliance with the operating instructions or interference with the device by unauthorised indi-
viduals are excluded.
Never take the product apart. Improper repairs can put the user in considerable danger.
Repairs should only be carried out by specialist personnel. The LED lights are not replaceable.
RISK OF LOSS OF LIFE AND ACCIDENT! Using the incorrect charger
may cause the headlight 6and the tail light 14 to be damaged, overheat or even explode.
Doing so will void the warranty.
List of pictograms used
Read the instructions!
Improper disposal of rechargeable
batteries may result in environmental
damage!
Danger to life and risk of accident
for infants and children!
USB – Universal Serial Bus – Connection
port, e.g. on a computer (charging only).
Observe the warnings and safety
notices! K XXXXX
German Federal Motor Transport
Authority test symbol (K followed by
approval number).
Caution! Explosion hazard!
Product and packaging should be
disposed in an environmentally friendly
manner.
Green Dot - Packaging recycling. 21
PAP
Recycling code for cardboard disposal.
Symbol identifying electrical and
electronic devices.
Product meets the applicable European
product-specific directives
LED Bike light set
Introduction
Congratulations on the purchase of your new device. In doing so you have chosen a top-quality
product. The instructions for use are to be considered as part of this product. It contains important
safety, assembly and disposal information. Before using the product, please familiarise yourself
with all the safety information and instructions for use. The product must only be used as described and for
the specified fields of application. If you pass the product on to anyone else, please be sure to also include
all documentation.
Intended use
This product is suitable for lighting the roadway whilst cycling. The LED Bicycle Light Set is approved as ex-
clusive lighting for all bicycles. Light distribution must not be impaired by other bicycle parts or luggage. The
product is intended for outdoor use. Any use other than the aforementioned or any product modification is
prohibited and can result in injuries and product damage. The manufacturer is not liable for damages result-
ing from improper use. This product is not intended for commercial use.
Parts description
1Headlight bracket
2Reducer rubber
3Headlight bracket retaining screw
4Headlight on/off switch
5Headlight rechargeable battery control system
with integrated automatic mode indicator
6Headlight
7Headlight angle adjustment screw
8Headlight lock
Disposal
The packaging is made of environmentally friendly materials, which may be disposed
of through your local recycling facilities.
Contact your local refuse disposal authority for more details on how to dispose of your worn-out product.
To help protect the environment, please dispose of the product properly, not without household
waste, when it has reached the end of its useful life. Please contact your local authority for infor-
mation on collection points and their opening hours.
Defective or old rechargeable batteries must be recycled in accordance with Directive 2006/66/EC and
its amendments. Return rechargeable batteries and/or the device to the recycling facilities provided.
Improper disposal of rechargeable batteries may
result in environmental damage!
Rechargeable batteries may not be disposed with household waste. They may contain toxic heavy metals and
are subject to hazardous waste regulations. The chemical symbols of the heavy metals are: Cd = cadmium,
Hg = mercury, Pb = lead. For this reason, dispose of used rechargeable batteries at a local collection point.
Improper rechargeable battery disposal destroys valuable resources and the hazardous substances in the
rechargeable batteries may pose a significant danger to human health and environment. Separate collection/
disposal of old rechargeable batteries prevents dangers to human health and environment, and valuable
resources regained by recycling.
Warranty
Dear customer,
This device is covered by a 3-year warranty from the date of purchase. In the event of product defects, you
have legal rights against the retailer of this product. Your statutory rights are not limited in any way by our
warranty detailed below.
Warranty terms
The warranty period begins on the date of purchase. Please retain the original receipt safely. This documen-
tation is required as the proof of purchase. Should a defect in material or manufacture occur within three
years from the date of purchase of this product, we will repair or replace - at our choice - it free of charge.
This warranty is conditional on the defective device and the receipt of purchase being presented within the
three year warranty period, and that there is a brief written description of the nature of the defect and of the
date it arose. If the defect is covered by our warranty, you will receive the repaired product or a replacement.
A repair or exchange of the device does not extend a new warranty period. The warranty period will not be
extended by repairs made under warranty. This also applies to replaced and repaired parts. Any damage
or defects present at the time of purchase must be reported immediately after unpacking. Repairs made after
the expiration of the warranty period are subject to payment.
Item No. 14141
A
2
1
6
4 5
8
7
3
ESC F1
~
`
!
1
F2
@
TAB
CAPS
E
lock
lock
C
~
`
ESC
F1
!
1
F2
@
TAB
CAPS
D
17
16
lock
B
14
15
12 13a 13b
11
9
10
17
16
IAN 294079
LED BIKE LIGHT SET
LED BIKE LIGHT SET
Operation and Safety Notes
LED-FAHRRADLEUCHTEN-SET
Bedienungs- und Sicherheitshinweise

GB/IE/NI
GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI
Operation
Switching on/ off
The headlight 6has three brightnesses.
On/Off switch 4
press once Automatic mode:
The light intensity adapts automatically to ambient lighting conditions. When automatic
mode is switched on 5the switch flashes green.
press twice Power mode (50 Lux) for riding in unlit areas
press three times Standard mode (25 Lux) for riding in lit areas
press four times Eco mode (10 Lux) for riding in well lit areas
press five times power off
Tail light with brake indicator function
press once Day-mode:
Tail light is off. Brake indicator function is active. Day-mode display
13b
flashes green.
press twice Night-mode:
Tail light is on. Brake indicator function is active.
press three times power off
Charging the headlight /tail light (see Fig. D + E)
Remove the rubber cover from the battery charging socket 17 and connect the USB cable 16 to the
battery charging socket 17 .
Then connect the USB plug of the USB cable 16 to a computer / laptop / standard USB charger with
5V DC and 500–1000mA. Using chargers with different specifications can damage the rechargeable
battery, thus the headlight. Doing so will void the warranty.
The headlight
6
and tail light
14
feature a battery indicator. If the indicator lights up red, the rechargea ble
batteries are drained. The indicator will light up green whilst charging. When the rechargeable batteries
are ready to be used again, the indicator will go out and you can use the headlight
6
and tail light
14
.
For the built-in rechargeable battery to operate at full power, please do not charge the headlight rec harge-
able battery for less than 6 hours the first time (tail light: no less than 5 hours). Please do not stop charg-
ing sooner, even if the LED is already extinguished. After this, a charging time of approx. 3.5 hours is
recommended for the headlight (recommended charging time for the tail light is 2.5 hours).
Cleaning and care
Never fully immerse the lights. Do not use corrosive or abrasive cleaning agents. Doing so will damage
the lights.
Clean the LED bicycle light set with a slightly damp, lint-free cloth.
Safety instructions for rechargeable batteries
CAUTION! EXPLOSION HAZARD! Keep rechargeable batteries away from
children, do not throw rechargeable batteries into fire, do not short-circuit and do
not take apart.
Failure to observe this instruction may result in the rechargeable batteries discharging beyond
their end voltage. This poses a risk of leaking.
Avoid contact with the skin, eyes and mucous membranes if fluid has leaked from the recharge-
able batteries. In the event of contact with battery acid, thoroughly flush the affected area
with clean water and seek immediate medical attention.
Note: If the red rechargeable battery control light 5,13 on the headlight 6or the tail
light 14 lights up,please recharge the rechargeable batteries immediately.
Please note, once the rechargeable battery control system lights up, the lights no longer
comply with the Road Traffic Act.
Installation
Installing the headlight (see Fig. A)
Unscrew the retaining screw 3from the bracket 1.
Position the bracket 1in the desired location on the handlebar. If necessary, use the reducer
rubbers 2to ensure an optimal fit.
Reinstall the retaining screw 3.
Tighten the screw hand tight. To prevent damage, do not use tools for this step.
To adjust to the optimal angle to the direction of travel, loosen the angle adjustment screw 72–3 turns
using a cross-tip screwdriver.
Adjust to the desired angle and tighten the angle adjustment screw 7.
Slide the headlight 6into the bracket 1until you hear it lock into place.
To release, press the headlight lock 8and slide the headlight 6forward out of the bracket 1.
ATTENTION! Routinely verify the headlamp adjustment. The light cone must point straight ahead, in
the direction of travel, and must not be adjusted too high so as not to blind oncoming traffic.
Installing the tail light (see Fig. B + C)
Secure the bracket 9to the seat post or the rear cross-bar using the rubber tab 11 . Be sure there are
no objects in front of the tail light 14 .
Tighten and hook in the rubber tab 11 .
Loosen the retaining screw 15 on the bracket 9and adjust to desired angle.
Then tighten the screw. Tighten the screw hand tight. To prevent damage, do not use tools for this step.
Slide the tail light 14 into the bracket 9until you hear it lock into place.
To remove the tail light 14 press the tail light locking mechanism 10 and take off the tail light 14 .
ATTENTION!The tail lamp must be installed and adjusted so the reference axis is parallel to the median
longitudinal plane of the vehicle and parallel to the road.
9Tail light bracket
10 Tail light lock
11 Tail light bracket rubber tab
12 Tail light on/off switch
13a
Tail light rechargeable battery control system
13b
Day-mode display
14 Tail light
15 Retaining screw tail light holder
16 USB cable
17 Rechargeable battery charging socket
(front and rear lights)
Scope of delivery
1 Headlight
1 Tail light
1 Headlight bracket
1 Tail light bracket
Reducer rubbers
1 USB cable
1 Instructions for assembly and use
Technical data
Headlight (auto-dimming)
Model designation: LI-2A / XC-195S
Rated output: 1W
Protection type: IP44 according to
DIN EN 60529
Rechargeable
Li-ion battery: 1300mAh, 3.7V
Tail light
Model designation: LR-1B / XC-242P
Rated output: 0.2W
Protection type: IP44 according to
DIN EN 60529
Rechargeable
Li-ion battery: 300mAh, 3.7V
Safety instructions
DANGER TO LIFE AND RISK OF ACCIDENT FOR IN-
FANTS AND CHILDREN! Never leave children unsupervised with the packing
material due to the suffocation hazard posed by swallowing parts thereof. Children
frequently underestimate the dangers.
Always keep the product away from children. This product is not a toy!
This product may be used by children 8 years and up as well as by persons with physical,
sensory or mental impairments or lacking experience and knowledge, when supervised or
instructed in the safe use of the product and understand the associated risks. Do not allow
children to play with the product. Cleaning and user maintenance must not be performed by
children without supervision. Please note, damages caused by incorrect handling, non-com-
pliance with the operating instructions or interference with the device by unauthorised indi-
viduals are excluded.
Never take the product apart. Improper repairs can put the user in considerable danger.
Repairs should only be carried out by specialist personnel. The LED lights are not replaceable.
RISK OF LOSS OF LIFE AND ACCIDENT! Using the incorrect charger
may cause the headlight 6and the tail light 14 to be damaged, overheat or even explode.
Doing so will void the warranty.
List of pictograms used
Read the instructions!
Improper disposal of rechargeable
batteries may result in environmental
damage!
Danger to life and risk of accident
for infants and children!
USB – Universal Serial Bus – Connection
port, e.g. on a computer (charging only).
Observe the warnings and safety
notices! K XXXXX
German Federal Motor Transport
Authority test symbol (K followed by
approval number).
Caution! Explosion hazard!
Product and packaging should be
disposed in an environmentally friendly
manner.
Green Dot - Packaging recycling. 21
PAP
Recycling code for cardboard disposal.
Symbol identifying electrical and
electronic devices.
Product meets the applicable European
product-specific directives
LED Bike light set
Introduction
Congratulations on the purchase of your new device. In doing so you have chosen a top-quality
product. The instructions for use are to be considered as part of this product. It contains important
safety, assembly and disposal information. Before using the product, please familiarise yourself
with all the safety information and instructions for use. The product must only be used as described and for
the specified fields of application. If you pass the product on to anyone else, please be sure to also include
all documentation.
Intended use
This product is suitable for lighting the roadway whilst cycling. The LED Bicycle Light Set is approved as ex-
clusive lighting for all bicycles. Light distribution must not be impaired by other bicycle parts or luggage. The
product is intended for outdoor use. Any use other than the aforementioned or any product modification is
prohibited and can result in injuries and product damage. The manufacturer is not liable for damages result-
ing from improper use. This product is not intended for commercial use.
Parts description
1Headlight bracket
2Reducer rubber
3Headlight bracket retaining screw
4Headlight on/off switch
5Headlight rechargeable battery control system
with integrated automatic mode indicator
6Headlight
7Headlight angle adjustment screw
8Headlight lock
Disposal
The packaging is made of environmentally friendly materials, which may be disposed
of through your local recycling facilities.
Contact your local refuse disposal authority for more details on how to dispose of your worn-out product.
To help protect the environment, please dispose of the product properly, not without household
waste, when it has reached the end of its useful life. Please contact your local authority for infor-
mation on collection points and their opening hours.
Defective or old rechargeable batteries must be recycled in accordance with Directive 2006/66/EC and
its amendments. Return rechargeable batteries and/or the device to the recycling facilities provided.
Improper disposal of rechargeable batteries may
result in environmental damage!
Rechargeable batteries may not be disposed with household waste. They may contain toxic heavy metals and
are subject to hazardous waste regulations. The chemical symbols of the heavy metals are: Cd = cadmium,
Hg = mercury, Pb = lead. For this reason, dispose of used rechargeable batteries at a local collection point.
Improper rechargeable battery disposal destroys valuable resources and the hazardous substances in the
rechargeable batteries may pose a significant danger to human health and environment. Separate collection/
disposal of old rechargeable batteries prevents dangers to human health and environment, and valuable
resources regained by recycling.
Warranty
Dear customer,
This device is covered by a 3-year warranty from the date of purchase. In the event of product defects, you
have legal rights against the retailer of this product. Your statutory rights are not limited in any way by our
warranty detailed below.
Warranty terms
The warranty period begins on the date of purchase. Please retain the original receipt safely. This documen-
tation is required as the proof of purchase. Should a defect in material or manufacture occur within three
years from the date of purchase of this product, we will repair or replace - at our choice - it free of charge.
This warranty is conditional on the defective device and the receipt of purchase being presented within the
three year warranty period, and that there is a brief written description of the nature of the defect and of the
date it arose. If the defect is covered by our warranty, you will receive the repaired product or a replacement.
A repair or exchange of the device does not extend a new warranty period. The warranty period will not be
extended by repairs made under warranty. This also applies to replaced and repaired parts. Any damage
or defects present at the time of purchase must be reported immediately after unpacking. Repairs made after
the expiration of the warranty period are subject to payment.
Item No. 14141
A
2
1
6
4 5
8
7
3
ESC F1
~
`
!
1
F2
@
TAB
CAPS
E
lock
lock
C
~
`
ESC
F1
!
1
F2
@
TAB
CAPS
D
17
16
lock
B
14
15
12 13a 13b
11
9
10
17
16
IAN 294079
LED BIKE LIGHT SET
LED BIKE LIGHT SET
Operation and Safety Notes
LED-FAHRRADLEUCHTEN-SET
Bedienungs- und Sicherheitshinweise

GB/IE/NI
GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI
Operation
Switching on /off
The headlight 6has three brightnesses.
On/Off switch 4
press once Automatic mode:
The light intensity adapts automatically to ambient lighting conditions. When automatic
mode is switched on 5the switch flashes green.
press twice Power mode (50 Lux) for riding in unlit areas
press three times Standard mode (25 Lux) for riding in lit areas
press four times Eco mode (10 Lux) for riding in well lit areas
press five times power off
Tail light with brake indicator function
press once Day-mode:
Tail light is off. Brake indicator function is active. Day-mode display
13b
flashes green.
press twice Night-mode:
Tail light is on. Brake indicator function is active.
press three times power off
Charging the headlight /tail light (see Fig. D + E)
Remove the rubber cover from the battery charging socket 17 and connect the USB cable 16 to the
battery charging socket 17 .
Then connect the USB plug of the USB cable 16 to a computer/laptop/standard USB charger with
5V DC and 500–1000mA. Using chargers with different specifications can damage the rechargeable
battery, thus the headlight. Doing so will void the warranty.
The headlight
6
and tail light
14
feature a battery indicator. If the indicator lights up red, the rechargea ble
batteries are drained. The indicator will light up green whilst charging. When the rechargeable batteries
are ready to be used again, the indicator will go out and you can use the headlight
6
and tail light
14
.
For the built-in rechargeable battery to operate at full power, please do not charge the headlight rec harge-
able battery for less than 6 hours the first time (tail light: no less than 5 hours). Please do not stop charg-
ing sooner, even if the LED is already extinguished. After this, a charging time of approx. 3.5 hours is
recommended for the headlight (recommended charging time for the tail light is 2.5 hours).
Cleaning and care
Never fully immerse the lights. Do not use corrosive or abrasive cleaning agents. Doing so will damage
the lights.
Clean the LED bicycle light set with a slightly damp, lint-free cloth.
Safety instructions for rechargeable batteries
CAUTION! EXPLOSION HAZARD! Keep rechargeable batteries away from
children, do not throw rechargeable batteries into fire, do not short-circuit and do
not take apart.
Failure to observe this instruction may result in the rechargeable batteries discharging beyond
their end voltage. This poses a risk of leaking.
Avoid contact with the skin, eyes and mucous membranes if fluid has leaked from the recharge-
able batteries. In the event of contact with battery acid, thoroughly flush the affected area
with clean water and seek immediate medical attention.
Note: If the red rechargeable battery control light 5,13 on the headlight 6or the tail
light 14 lights up,please recharge the rechargeable batteries immediately.
Please note, once the rechargeable battery control system lights up, the lights no longer
comply with the Road Traffic Act.
Installation
Installing the headlight (see Fig. A)
Unscrew the retaining screw 3from the bracket 1.
Position the bracket 1in the desired location on the handlebar. If necessary, use the reducer
rubbers 2to ensure an optimal fit.
Reinstall the retaining screw 3.
Tighten the screw hand tight. To prevent damage, do not use tools for this step.
To adjust to the optimal angle to the direction of travel, loosen the angle adjustment screw 72–3 turns
using a cross-tip screwdriver.
Adjust to the desired angle and tighten the angle adjustment screw 7.
Slide the headlight 6into the bracket 1until you hear it lock into place.
To release, press the headlight lock 8and slide the headlight 6forward out of the bracket 1.
ATTENTION! Routinely verify the headlamp adjustment. The light cone must point straight ahead, in
the direction of travel, and must not be adjusted too high so as not to blind oncoming traffic.
Installing the tail light (see Fig. B + C)
Secure the bracket 9to the seat post or the rear cross-bar using the rubber tab 11 . Be sure there are
no objects in front of the tail light 14 .
Tighten and hook in the rubber tab 11 .
Loosen the retaining screw 15 on the bracket 9and adjust to desired angle.
Then tighten the screw. Tighten the screw hand tight. To prevent damage, do not use tools for this step.
Slide the tail light 14 into the bracket 9until you hear it lock into place.
To remove the tail light 14 press the tail light locking mechanism 10 and take off the tail light 14 .
ATTENTION!The tail lamp must be installed and adjusted so the reference axis is parallel to the median
longitudinal plane of the vehicle and parallel to the road.
9Tail light bracket
10 Tail light lock
11 Tail light bracket rubber tab
12 Tail light on/off switch
13a
Tail light rechargeable battery control system
13b
Day-mode display
14 Tail light
15 Retaining screw tail light holder
16 USB cable
17 Rechargeable battery charging socket
(front and rear lights)
Scope of delivery
1 Headlight
1 Tail light
1 Headlight bracket
1 Tail light bracket
Reducer rubbers
1 USB cable
1 Instructions for assembly and use
Technical data
Headlight (auto-dimming)
Model designation: LI-2A/XC-195S
Rated output: 1 W
Protection type: IP44 according to
DIN EN 60529
Rechargeable
Li-ion battery: 1300 mAh, 3.7 V
Tail light
Model designation: LR-1B / XC-242P
Rated output: 0.2 W
Protection type: IP44 according to
DIN EN 60529
Rechargeable
Li-ion battery: 300 mAh, 3.7 V
Safety instructions
DANGER TO LIFE AND RISK OF ACCIDENT FOR IN-
FANTS AND CHILDREN! Never leave children unsupervised with the packing
material due to the suffocation hazard posed by swallowing parts thereof. Children
frequently underestimate the dangers.
Always keep the product away from children. This product is not a toy!
This product may be used by children 8 years and up as well as by persons with physical,
sensory or mental impairments or lacking experience and knowledge, when supervised or
instructed in the safe use of the product and understand the associated risks. Do not allow
children to play with the product. Cleaning and user maintenance must not be performed by
children without supervision. Please note, damages caused by incorrect handling, non-com-
pliance with the operating instructions or interference with the device by unauthorised indi-
viduals are excluded.
Never take the product apart. Improper repairs can put the user in considerable danger.
Repairs should only be carried out by specialist personnel. The LED lights are not replaceable.
RISK OF LOSS OF LIFE AND ACCIDENT! Using the incorrect charger
may cause the headlight 6and the tail light 14 to be damaged, overheat or even explode.
Doing so will void the warranty.
List of pictograms used
Read the instructions!
Improper disposal of rechargeable
batteries may result in environmental
damage!
Danger to life and risk of accident
for infants and children!
USB – Universal Serial Bus – Connection
port, e.g. on a computer (charging only).
Observe the warnings and safety
notices! K XXXXX
German Federal Motor Transport
Authority test symbol (K followed by
approval number).
Caution! Explosion hazard!
Product and packaging should be
disposed in an environmentally friendly
manner.
Green Dot - Packaging recycling. 21
PAP
Recycling code for cardboard disposal.
Symbol identifying electrical and
electronic devices.
Product meets the applicable European
product-specific directives
LED Bike light set
Introduction
Congratulations on the purchase of your new device. In doing so you have chosen a top-quality
product. The instructions for use are to be considered as part of this product. It contains important
safety, assembly and disposal information. Before using the product, please familiarise yourself
with all the safety information and instructions for use. The product must only be used as described and for
the specified fields of application. If you pass the product on to anyone else, please be sure to also include
all documentation.
Intended use
This product is suitable for lighting the roadway whilst cycling. The LED Bicycle Light Set is approved as ex-
clusive lighting for all bicycles. Light distribution must not be impaired by other bicycle parts or luggage. The
product is intended for outdoor use. Any use other than the aforementioned or any product modification is
prohibited and can result in injuries and product damage. The manufacturer is not liable for damages result-
ing from improper use. This product is not intended for commercial use.
Parts description
1Headlight bracket
2Reducer rubber
3Headlight bracket retaining screw
4Headlight on/off switch
5Headlight rechargeable battery control system
with integrated automatic mode indicator
6Headlight
7Headlight angle adjustment screw
8Headlight lock
Disposal
The packaging is made of environmentally friendly materials, which may be disposed
of through your local recycling facilities.
Contact your local refuse disposal authority for more details on how to dispose of your worn-out product.
To help protect the environment, please dispose of the product properly, not without household
waste, when it has reached the end of its useful life. Please contact your local authority for infor-
mation on collection points and their opening hours.
Defective or old rechargeable batteries must be recycled in accordance with Directive 2006/66/EC and
its amendments. Return rechargeable batteries and/or the device to the recycling facilities provided.
Improper disposal of rechargeable batteries may
result in environmental damage!
Rechargeable batteries may not be disposed with household waste. They may contain toxic heavy metals and
are subject to hazardous waste regulations. The chemical symbols of the heavy metals are: Cd = cadmium,
Hg = mercury, Pb = lead. For this reason, dispose of used rechargeable batteries at a local collection point.
Improper rechargeable battery disposal destroys valuable resources and the hazardous substances in the
rechargeable batteries may pose a significant danger to human health and environment. Separate collection/
disposal of old rechargeable batteries prevents dangers to human health and environment, and valuable
resources regained by recycling.
Warranty
Dear customer,
This device is covered by a 3-year warranty from the date of purchase. In the event of product defects, you
have legal rights against the retailer of this product. Your statutory rights are not limited in any way by our
warranty detailed below.
Warranty terms
The warranty period begins on the date of purchase. Please retain the original receipt safely. This documen-
tation is required as the proof of purchase. Should a defect in material or manufacture occur within three
years from the date of purchase of this product, we will repair or replace - at our choice - it free of charge.
This warranty is conditional on the defective device and the receipt of purchase being presented within the
three year warranty period, and that there is a brief written description of the nature of the defect and of the
date it arose. If the defect is covered by our warranty, you will receive the repaired product or a replacement.
A repair or exchange of the device does not extend a new warranty period. The warranty period will not be
extended by repairs made under warranty. This also applies to replaced and repaired parts. Any damage
or defects present at the time of purchase must be reported immediately after unpacking. Repairs made after
the expiration of the warranty period are subject to payment.
Item No. 14141
A
2
1
6
4 5
8
7
3
ESC F1
~
`
!
1
F2
@
TAB
CAPS
E
lock
lock
C
~
`
ESC
F1
!
1
F2
@
TAB
CAPS
D
17
16
lock
B
14
15
12 13a 13b
11
9
10
17
16
IAN 294079
LED BIKE LIGHT SET
LED BIKE LIGHT SET
Operation and Safety Notes
LED-FAHRRADLEUCHTEN-SET
Bedienungs- und Sicherheitshinweise

DE/AT/CH DE/AT/CH
DE/AT/CH DE/AT/CH DE/AT/CH
DE/AT/CH
DE
KLB GmbH
Diekbree 8, DE-48157 Münster, DEUTSCHLAND
Tel: [phone]
E-Mail: [e-mail]
www.klb-service.eu
AT
KLB GmbH
Diekbree 8, DE-48157 Münster, DEUTSCHLAND
Tel: [phone]
E-Mail: [e-mail]
www.klb-service.eu
CH
KLB GmbH
Diekbree 8, DE-48157 Münster, DEUTSCHLAND
Tel: [phone]
E-Mail: [e-mail]
www.klb-service.eu
IAN 294079
GB/IE/NI
Extent of warranty
The device was manufactured to strict quality guidelines and diligently inspected prior to shipment. The war-
ranty applies to defects in material or manufacture. This warranty does not apply to product parts subject to
regular wear and therefore considered wear parts or damage to fragile parts, e.g. switches, rechargeable
batteries, or made from glass. This warranty becomes void if the device has been damaged or improperly
used or maintained. Proper use of the product requires strictly observing all instructions for use. Purposes
and practices which the operating instructions warn of or advise against must be avoided without fail. This
product is only intended for private, non-commercial use. Any incorrect or improper use of the device, use
of force and changes not performed by our authorized service branch will void the warranty.
Please follow the instructions below to ensure your claim is processed quickly:
· Please have your receipt and the product number ready as your proof of purchase.
· Please refer to the type plate or the cover sheet of these instructions for the product number.
· In the event of malfunctions or other defects, please first contact the following service department by
phone or e-mail.
· A product determined defective may then be returned to the specified service address free of charge,
including the proof of purchase (receipt) and information about the defect and when it occurred. Please
note, the service department must be notified before returning the product!
This and many other manuals, product videos and software are available for download at www.lidl-service.com.
GB
KLB GmbH
Diekbree 8
DE-48157 Münster, GERMANY
Phone: [phone]
email: [email protected]
www.klb-service.eu
IE
KLB GmbH
Diekbree 8
DE-48157 Münster, GERMANY
Phone: [phone]
email: [email protected]
www.klb-service.eu
NI
KLB GmbH
Diekbree 8
DE-48157 Münster, GERMANY
Phone: [phone]
email: [email protected]
www.klb-service.eu
IAN 294079
DE/AT/CH
Garantiebedingungen
Die Garantiefrist beginnt mit dem Kaufdatum. Bitte bewahren Sie den Original-Kassenbon gut auf. Diese
Unterlage wird als Nachweis für den Kauf benötigt. Tritt innerhalb von drei Jahren ab dem Kaufdatum
dieses Produkts ein Material- oder Fabrikationsfehler auf, wird das Produkt von uns – nach unserer Wahl –
für Sie kostenlos repariert oder ersetzt. Diese Garantieleistung setzt voraus, dass innerhalb der Drei-Jahres-
Frist das defekte Gerät und der Kaufbeleg (Kassenbon) vorgelegt und schriftlich kurz beschrieben wird,
worin der Mangel besteht und wann er aufgetreten ist. Wenn der Defekt von unserer Garantie gedeckt ist,
erhalten Sie das reparierte oder ein neues Produkt zurück. Mit Reparatur oder Austausch des Produkts be-
ginnt kein neuer Garantiezeitraum. Die Garantiezeit wird durch die Gewährleistung nicht verlängert. Dies
gilt auch für ersetzte und reparierte Teile. Eventuell schon beim Kauf vorhandene Schäden und Mängel
müssen sofort nach dem Auspacken gemeldet werden. Nach Ablauf der Garantiezeit anfallende Reparatu-
ren sind kostenpflichtig.
Garantieumfang
Das Gerät wurde nach strengen Qualitätsrichtlinien sorgfältig produziert und vor Anlieferung gewissenhaft
geprüft. Die Garantieleistung gilt für Material- oder Fabrikationsfehler. Diese Garantie erstreckt sich nicht
auf Produktteile, die normaler Abnutzung ausgesetzt sind und daher als Verschleißteile angesehen werden
können oder für Beschädigungen an zerbrechlichen Teilen, z. B. Schalter, Akkus oder die aus Glas gefertigt
sind. Diese Garantie verfällt, wenn das Produkt beschädigt, nicht sachgemäß benutzt oder gewartet wurde.
Für eine sachgemäße Benutzung des Produkts sind alle in der Bedienungsanleitung aufgeführten Anweisun-
gen genau einzuhalten. Verwendungszwecke und Handlungen, von denen in der Bedienungsanleitung ab-
geraten oder vor denen gewarnt wird, sind unbedingt zu vermeiden. Das Produkt ist lediglich für den
privaten und nicht für den gewerblichen Gebrauch bestimmt. Bei missbräuchlicher und unsachgemäßer Be-
handlung, Gewaltanwendung und bei Eingriffen, die nicht von unserer autorisierten Service-Niederlassung
vorgenommen wurden, erlischt die Garantie.
Um eine schnelle Bearbeitung Ihres Anliegens zu gewährleisten, folgen Sie bitte den folgenden Hinweisen:
· Bitte halten Sie für alle Anfragen den Kassenbon und die Artikelnummer als Nachweis für den Kauf
bereit.
· Die Artikelnummer entnehmen Sie bitte dem
Typenschild oder dem Titelblatt dieser Anleitung.
· Sollten Funktionsfehler oder sonstige Mängel auftreten, kontaktieren Sie bitte zunächst die nachfolgend
benannte Serviceabteilung telefonisch oder per E-Mail.
· Ein als defekt erfasstes Produkt können Sie dann unter Beifügung des Kaufbelegs (Kassenbon) und An-
gabe, worin der Mangel besteht und wann er aufgetreten ist, für Sie portofrei an die Ihnen mitgeteilte
Service-Anschrift übersenden. Bitte beachten Sie, dass unbedingt vor Versand die Serviceabteilung
informiert werden muss!
Auf www.lidl-service.com können Sie diese und viele weitere Handbücher, Produktvideos und Software
herunterladen.
Reinigung und Pflege
Die Leuchten niemals komplett unter Wasser tauchen. Benutzen Sie keine ätzenden oder scheuernden
Reinigungsmittel. Hierdurch entstehen Beschädigungen an den Leuchten.
Reinigen Sie das LED-Fahrradleuchten-Set mit einem leicht feuchten, fusselfreien Tuch.
Entsorgung
Die Verpackung besteht aus umweltfreundlichen Materialien, die Sie über die örtlichen
Recyclingstellen entsorgen können.
Möglichkeiten zur Entsorgung des ausgedienten Produkts erfahren Sie bei Ihrer Gemeinde oder
Stadtverwaltung.
Werfen Sie Ihr Produkt, wenn es ausgedient hat, im Interesse des Umweltschutzes nicht in den
Hausmüll, sondern führen Sie es einer fachgerechten Entsorgung zu. Über Sammelstellen und
deren Öffnungszeiten können Sie sich bei Ihrer zuständigen Verwaltung informieren.
Defekte oder verbrauchte Akkus müssen gemäß Richtlinie 2006/66/EG und deren Änderungen recycelt
werden. Geben Sie Akkus und/oder das Gerät über die angebotenen Sammeleinrichtungen zurück.
Umweltschäden durch falsche
Entsorgung der Akkus!
Akkus dürfen nicht über den Hausmüll entsorgt werden. Sie können giftige Schwermetalle enthalten und
unterliegen der Sondermüllbehandlung. Die chemischen Symbole der Schwermetalle sind wie folgt: Cd =
Cadmium, Hg = Quecksilber, Pb = Blei. Geben Sie deshalb verbrauchte Akkus bei einer kommunalen Sam-
melstelle ab.
Bei unsachgemäßer Entsorgung der Akkus gehen wertvolle Ressourcen verloren und durch in den Akkus
enthaltene Schadstoffe kann es zu einer erheblichen Gefahr für Gesundheit und Umwelt kommen. Durch
die getrennte Sammlung/Entsorgung von Akkus werden Gefahren für Gesundheit und Umwelt vermieden
und durch Recycling wertvolle Rohstoffe zurückgewonnen.
Garantie
Sehr geehrte Kundin, sehr geehrter Kunde,
Sie erhalten auf dieses Gerät 3 Jahre Garantie ab Kaufdatum. Im Falle von Mängeln dieses Produkts
stehen Ihnen gegen den Verkäufer des Produkts gesetzliche Rechte zu. Diese gesetzlichen Rechte werden
durch unsere im Folgenden dargestellte Garantie nicht eingeschränkt.
Zum Lösen des Rücklichts 14 drücken Sie die Rücklichtarretierung 10 und ziehen Sie das Rücklicht 14 ab.
ACHTUNG! Das Rücklicht muss so angebaut und eingestellt werden, dass die Bezugsachse parallel
zur Fahrzeuglängsmittelebene und parallel zur Fahrbahn liegt.
Bedienung
Ein-/ ausschalten
Der Scheinwerfer 6besitzt drei Leuchtstärken.
Ein-/-Aus-Schalter 4
einmal drücken Auto Modus:
Die Lichtstärke passt sich automatisch der Umgebungsbeleuchtung an.
Bei eingeschaltetem Auto-Modus 5blinkt der Schalter grün.
zweimal drücken Power Modus (50 Lux) für Fahrten in unbeleuchteter Umgebung
dreimal drücken Standard Modus (25 Lux) für Fahrten in beleuchteter Umgebung
viermal drücken Eco Modus (10 Lux) für Fahrten in gut beleuchteter Umgebung
fünfmal drücken ausschalten
Rücklicht mit Bremsanzeigefunktion
einmal drücken Tag-Modus:
Rücklicht ist aus. Bremsanzeigefunktion ist aktiv. Tag-Modus Anzeige
13b
blinkt grün.
zweimal drücken Nacht-Modus:
Rücklicht ist an. Bremsanzeigefunktion ist aktiv.
dreimal drücken ausschalten
Scheinwerfer/Rücklicht laden (s. Abb. D + E)
Entfernen Sie die Gummiabdeckung von der Akku-Ladebuchse 17 und verbinden das USB-Kabel 16
mit der Akku-Ladebuchse 17 .
Anschließend verbinden Sie den USB-Stecker des USB-Kabels 16 mit einem Computer / Laptop / USB-
Standard-Ladegerät mit 5V DC und 500–1000mA. Bei Verwendung von Ladegeräten mit anderen
Spezifikationen kann der Akku und damit der Scheinwerfer beschädigt werden. In diesem Fall erlischt
die Gewährleistung.
Scheinwerfer 6und Rücklicht 14 verfügen über eine Ladeanzeige. Leuchtet die Anzeige rot, so sind
die Akkus entladen. Während des Ladevorgangs leuchtet die Anzeige grün. Sind die Akkus wieder
einsatzbereit, erlischt die Anzeige und Sie können Scheinwerfer 6und Rücklicht 14 benutzen.
Um die volle Leistung der integrierten Akkus zu erhalten, laden Sie bitte den Schweinwerfer-Akku beim
ersten Mal nicht kürzer als 6 Stunden (Rücklicht-Akku: nicht kürzer als 5 Stunden). Bitte beenden Sie den
Ladevorgang nicht früher, auch wenn die LED bereits erloschen ist. Anschließend wird bei dem Schein-
werfer eine Ladezeit von ca. 3,5 Stunden empfohlen (empfohlene Ladezeit für das Rücklicht: 2,5 Stunden).
Sicherheitshinweise zu Akkus
VORSICHT! EXPLOSIONSGEFAHR! Halten Sie Akkus von Kindern fern,
werfen Sie die Akkus nicht ins Feuer, schließen Sie sie nicht kurz und nehmen Sie
sie nicht auseinander.
Bei Nichtbeachtung der Hinweise können die Akkus über ihre Endspannung hinaus entladen
werden. Es besteht dann die Gefahr des Auslaufens.
Vermeiden Sie Kontakt mit Haut, Augen und Schleimhäuten, falls Flüssigkeit aus den Akkus
ausgetreten ist. Spülen Sie bei Kontakt mit Batteriesäure die betroffenen Stellen sofort mit
reichlich klarem Wasser und suchen Sie umgehend einen Arzt auf.
Hinweis: Leuchtet die rote Akku-Kontrollleuchte 5, 13 im Scheinwerfer 6oder im Rück-
licht 14 auf, so laden Sie die Akkus wieder umgehend auf.
Bitte beachten Sie, dass nach dem Aufleuchten des Akku-Kontrollsystems die Leuchten nicht
mehr der StVZO entsprechen.
Montage
Scheinwerfer montieren (s. Abb. A)
Drehen Sie die Halteschraube 3aus dem Halter 1.
Positionieren Sie den Halter 1an der gewünschten Stelle am Lenker. Verwenden Sie gegebenenfalls
die Reduziergummis 2, um eine optimale Passform zu gewährleisten.
Drehen Sie die Halteschraube 3wieder ein.
Ziehen Sie dabei die Schraube handfest. Verwenden Sie hierzu kein Werkzeug, um Beschädigungen
zu vermeiden.
Um den optimalen Winkel zur Fahrtrichtung einzustellen, lösen Sie mit einem Kreuzschraubendreher
die Winkelverstellschraube 7um 2–3 Umdrehungen.
Stellen Sie den gewünschten Winkel ein und ziehen die Winkelverstellschraube 7wieder fest.
Schieben Sie den Scheinwerfer 6auf den Halter 1bis er hörbar einrastet.
Zum Lösen drücken Sie die Scheinwerferarretierung 8und schieben den Scheinwerfer 6vom
Halter 1aus nach vorne.
ACHTUNG! Überprüfen Sie regelmäßig die richtige Einstellung Ihres Scheinwerfers. Der Lichtkegel
muss geradeaus in Fahrtrichtung zeigen und darf nicht zu hoch eingestellt sein, um den Gegenverkehr
nicht zu blenden.
Rücklicht montieren (s. Abb. B + C)
Befestigen Sie den Halter 9anhand der Gummilasche 11 an der Sattelstütze oder der Hinterbaustrebe.
Achten Sie dabei darauf, dass sich keine Gegenstände vor dem Rücklicht 14 befinden.
Ziehen Sie die Gummilasche 11 straff und haken Sie diese ein.
Lösen Sie die Halteschraube 15 des Halters 9und stellen Sie den gewünschten Winkel ein.
Anschließend ziehen Sie die Schraube wieder fest. Ziehen Sie dabei die Schraube handfest. Verwenden
Sie hierzu kein Werkzeug, um Beschädigungen zu vermeiden.
Schieben Sie das Rücklicht 14 auf den Halter 9bis er hörbar einrastet.
9Halter Rücklicht
10 Rücklichtarretierung
11 Gummilasche Halter Rücklicht
12 Ein-/Aus-Schalter Rücklicht
13a
Rücklicht-Akku-Kontrollsystem
13b
Tag-Modus Anzeige
14 Rücklicht
15 Halteschraube Rücklichthalter
16 USB-Kabel
17 Akku-Ladebuchse (Front- und Rückleuchte)
Lieferumfang
1 Scheinwerfer
1 Rücklicht
1 Halter Scheinwerfer
1 Halter Rücklicht
Reduziergummis
1 USB-Kabel
1 Montage- und Bedienungsanleitung
Technische Daten
Scheinwerfer (selbstabblendend)
Typ-Bezeichnung: LI-2A/XC-195S
Nennleistung: 1W
Schutzart: IP44 nach DIN EN 60529
Li-Ion-Akku: 1300mAh, 3,7V
Rücklicht
Typ-Bezeichnung: LR-1B/XC-242P
Nennleistung: 0,2W
Schutzart: IP44 nach DIN EN 60529
Li-Ion-Akku: 300mAh, 3,7V
Sicherheitshinweise
LEBENS- UND UNFALLGEFAHR FÜR KLEINKINDER UN D
KINDER! Lassen Sie Kinder niemals unbeaufsichtigt mit dem Verpackungsmaterial,
denn es besteht Erstickungsgefahr durch das Verschlucken von Verpackungsteilen.
Kinder unterschätzen häufig die Gefahren.
Halten Sie das Produkt stets von Kindern fern. Das Produkt ist kein Spielzeug!
Dieses Produkt kann von Kindern ab 8 Jahren und darüber sowie von Personen mit verrin-
gerten physischen, sensorischen oder mentalen Fähigkeiten oder Mangel an Erfahrung und
Wissen benutzt werden, wenn sie beaufsichtigt oder bezüglich des sicheren Gebrauchs des
Produkts unterwiesen wurden und die daraus resultierenden Gefahren verstehen. Kinder dürfen
nicht mit dem Produkt spielen. Reinigung und Benutzerwartung dürfen nicht von Kindern ohne
Beaufsichtigung durchgeführt werden. Beachten Sie, dass Beschädigungen durch unsach-
gemäße Handhabung, Nichtbeachtung der Bedienungsanleitung oder Eingriff durch nicht
autorisierte Personen von der Gewährleistung ausgeschlossen sind.
Nehmen Sie das Produkt keinesfalls auseinander. Durch unsachgemäße Reparaturen können
erhebliche Gefahren für den Benutzer entstehen. Lassen Sie Reparaturen nur von Fachkräften
durchführen. Die LED sind nicht austauschbar.
LEBENS- UND UNFALLGEFAHR! Bei Verwendung eines falschen
Ladegerätes können der Scheinwerfer 6und das Rücklicht 14 beschädigt werden, überhitzen
und sogar explodieren. In diesem Fall erlischt die Gewährleistung.
Legende der verwendeten Piktogramme
Anweisungen lesen! Umweltschäden durch falsche
Entsorgung der Batterien/Akkus!
Lebens- und Unfallgefahr für
Kleinkinder und Kinder!
USB – Universal Serial Bus – Verbin-
dungsstelle zum Anschluss z. B. an
einen Computer (nur aufladen).
Warn- und Sicherheitshinweise
beachten! K XXXXX
Deutsches Prüfzeichen des Kraftfahrt-
Bundesamtes (K mit nachfolgender
Zulassungsnummer).
Vorsicht! Explosionsgefahr! Produkte und Verpackungen sollen
umweltschonend entsorgt werden.
Grüner Punkt - Recycling von
Verpackungen.
21
PAP
Recycling-Code zur Entsorgung
von Pappe.
Symbol zur Erkennung von Elektro-
und Elektronikgeräten.
Produkt entspricht den produktspezifisch
geltenden europäischen Richtlinien
LED-Fahrradleuchten-Set
Einleitung
Herzlichen Glückwunsch zum Kauf Ihres neuen Gerätes. Sie haben sich damit für ein hochwertiges
Produkt entschieden. Die Bedienungsanleitung ist Bestandteil dieses Produktes. Sie enthält wichtige
Hinweise zur Sicherheit, Montage und Entsorgung. Machen Sie sich vor der Benutzung des Pro-
duktes mit allen Bedien- und Sicherheitshinweisen vertraut. Benutzen Sie das Produkt nur wie beschrieben und
für die angegebenen Einsatzbereiche. Händigen Sie alle Unterlagen bei Weitergabe des Produktes an Dritte
mit aus.
Bestimmungsgemäße Verwendung
Das Produkt ist zur Fahrbahnausleuchtung beim Fahrradfahren geeignet. Das LED-Fahrradleuchten-Set ist für
alle Fahrräder als alleinige Beleuchtung zugelassen. Die Lichtverteilung darf durch keine anderen Fahrrad-
teile oder Gepäckstücke behindert werden. Das Produkt ist zur Anwendung im Außenbereich bestimmt. Eine
andere Verwendung als zuvor beschrieben oder eine Veränderung des Produktes ist nicht zulässig und kann
zu Verletzungen und Beschädigungen des Produktes führen. Für aus unsachgemäßer Verwendung entstandene
Schäden übernimmt der Hersteller keine Haftung. Das Produkt ist nicht für den gewerblichen Einsatz bestimmt.
Teilebeschreibung
1Halter Scheinwerfer
2Reduziergummis
3Halteschraube Scheinwerferhalter
4Ein-/Aus-Schalter Scheinwerfer
5Scheinwerfer-Akku-Kontrollsystem mit
integrierter Auto-Modus-Anzeige
6Scheinwerfer
7Winkelverstellschraube Scheinwerfer
8Scheinwerferarretierung
KLB GmbH
Diekbree 8
DE-48157 Münster
GERMANY
Last Information Update · Stand
der Informationen: 10/2017
Ident.-No.: 14141102017-IE/NI