CRL LD823 User manual
Visit us at for international toll free information 1
© COPYRIGHT C.R. LAURENCE CO., INC. 2013
Sub ect to printing errors and design changes over which we have no control. In the event of problems please contact our Customer Service Department.
AVDB3094_03.13
AC.R. LAURENCE Co., INC.
CORDLESS POWER SCREWDRIVER
CAT. NO. LD823, LD823EU
and LD823AU
)$ )2/8 ?=381 /6/-><3- >996= 7+-238/= 9< /;?3:7/8> ,+=3- =+0/>C
:</-+?>398==29?6.+6A+C=,/09669A/.>9</.?-/>2/<3=59003<//6/-><3-=29-5
+8.:/<=98+6384?<C97:6/>/6C</+.>2/7+8?+6,/09</:<9-//.381>9?=/>23=>996
Visit us at for international toll free information 2
A
SAFETY INSTRUCTIONS
"!$& &
Please read these operating and safety instructions carefully and completely. For your own safety,
before using this equipment check that the voltage is correct and that parts are firmly secured.
)$
When using electric tools, basic safety precautions should always be followed to reduce the risk of
fire, electric shock, and personal injury. Please read all of these instructions before attempting to
operate this machine. Save this manual for future reference.
//:C9?<A9<5+</+-6/+< Cluttered work areas invite accidents.
98=3./<A9<5+</+/8@3<987/8> Do not expose tools to rain. Do not use tools in damp
or wet locations. Keep work area well lit. Never use tools near flammable liquids or gases.
"<9>/->C9?<=/60+1+38=>/6/-><3-=29-5 Avoid body contact with earthed or grounded surfaces.
//:9>2/<:/9:6/+A+C Do not let others, especially children, come close to the work
and touch the tool or the extension lead. Keep them away from the work area.
%>9</3.6/>996= When not in use, tools should be stored in a dry locked-up place, out of the
reach of children.
/@/<09<-/>2/>996= Your tools will be more efficient and safer when used at the rate for
which they were intended.
'=/>2/<312>>996 Do not force small tools to do the job of a heavy-duty tool. Do not use tools for
purposes not intended; for example, do not use circular saws to cut tree limbs or logs.
</==:<9:/<6C Do not wear loose clothing or jewelry which may get caught in moving parts.
Non-skid footwear is recommended when working outdoors. If you have long hair, tie it back
and wear protective hair covering.
'=/:<9>/->3@//;?3:7/8> Use safety glasses. Use face or dust mask if cutting operations create dust.
988/->.?=>/B><+->398/;?3:7/8> If the machines have a connection for dust extraction
equipment, ensure these are connected and properly used.
989>.+7+1/>2/-+,6/ Never pull the power cable to disconnect the machine. Keep the
cable away from heat, oil and sharp edges.
%/-?</A9<5:3/-/ Where possible, use clamps or a vice to hold the workpiece. It's much
safer than using your hands.
98>9@/<</+-2 Keep proper footing and balance at all times.
+38>+38>996=38199.A9<5381-98.3>398 Keep cutting tools sharp and clean for better
performance and optimum safety. Follow instructions for lubricating and changing accessories.
Inspect power cables regularly and, if damaged, have them replaced by an authorized service
center. Inspect extension cords regularly and replace immediately if damaged. Keep handles
dry, clean and free from oil and grease at all times.
Visit us at for international toll free information 3
A
3=-988/->>996= Disconnect tools from the power supply when not in use, before any
maintenance operation, and when changing accessories such as blades, bits, cutters, etc.
$/79@/+.4?=>3815/C=+8.=:+88/<= Get into the habit of checking that adjusting
keys and spanners have been removed from the machine before turning it on.
@93.?838>/8>398+6=>+<>381 Ensure switch is in "OFF" position before plugging in the machine.
'=/:<9:/</B>/8=3986/+.= When the tool is used outdoors, use only extension
leads intended for outdoor use and labelled as such.
%>+C+6/<> Concentrate on what you are doing, use common sense and do not
operate the tool when you are tired.
2/-5>2+>89:+<>3=.+7+1/. Before using a tool, make sure that it is in good working order.
Check the alignment and condition of moving parts, mounting and any other aspect that may
affect its operation. A guard or other part that is damaged should be properly repaired or replaced
by an authorized service center unless otherwise indicated in this instruction manual. Do not use
the tool if the switch does not turn on and off.
)+<8381 The use of any accessory or attachment other than one recommended in this
instruction manual may present a risk of personal injury.
+@/C9?<>996</:+3</.+>+8+?>29<3D/.=/<@3-/-/8>/< This electric tool complies with
current safety rules. Repairs should only be carried out using original spare parts. Otherwise,
the user could expose themselves to considerable danger.
&(
)$
When drilling, sanding, sawing, or grinding, dust particles will be produced. In some instances,
depending on the materials you are working with, this dust can be particularly harmful to you
(e.g. lead from old paint). You are advised to consider the risk associated with the materials you
are working with and to reduce the risk of exposure.
You should:
- Work in a well-ventilated area.
- Work with approved safety equipment, such as dust masks that are specially designed
to filter microscopic particles.
&! %&*$'%!$*!'$%$)$($
989>/B:9=/>9<+389<A+>/<.
989>.<9:=2+5/9<=><35/>2/,+>>/<C
)/+<2/+<381:<9>/->398A2/88/-/==+<CB:9=?</>9893=/-+8-+?=/2/+<38169==.
?>>381=-<+:381,6+./=+8.+--/==9<3/=-+8,/-97/@/<C29> Take care when
changing or handling any bits or accessories.
$/-2+<1/>2/,+>>/<C986CA3>2>2/-2+<1/<=:/-303/.,C>2/7+8?0+->?</<. A charger
that is suitable for one type of battery pack may create a risk of fire when used with another
battery pack.
'=/>23=:9A/<>996986CA3>2=:/-3+66C./=318/.,+>>/<C:+-5= Use of any other
battery packs may create a risk of injury and fire.
Visit us at for international toll free information 4
A
)2/8>2/,+>>/<C:+-53=89>38?=/5//:3>+A+C0<979>2/<7/>+69,4/->=635/
:+:/<-63:=-938=5/C=8+36==-</A=9<9>2/<=7+667/>+69,4/->=>2+>-+87+5/
+-988/->3980<9798/>/<738+6>9+89>2/<. Shorting the battery terminals together
may cause burns or a fire.
'8./</B></7/-98.3>398=/6/-><96C>/7+C6/+50<97>2/,+>>/<C If contact
accidently occurs, flush your skin with water. If electrolyte contacts your eyes, seek
additional medical help. Electrolyte from the battery may cause irritation or burns.
96.>2/>996,C>2/38=?6+>/.1<3::381=?<0+-/=/=:/-3+66CA2/8:/<09<7381+8
9:/<+>398A2/</>2/,3>7+C-98>+->23../8A3<381. If the bit contains a 'live' wire,
exposed metal parts of the power tool could become 'live' and give the operator an
electric shock.
0:9==3,6/?=/-6+7:=9<+@3-/>9296.C9?<A9<5
)2/8.<3@381=-</A=38>9A+66=0699<=9<=3736+<+</+=7+5/=?</+=0+<+=
:9==3,6/>2+>>2/</+</89=/<@3-/638/=1+=9<A+>/<:3:/=/6/-><3--+,6/=/>-
38>2/:+>290>2/=-</A. If the bit contacts a 'live' wire, exposed metal parts of the
power tool could become 'live' and give the operator an electric shock.
)$
This machine is not intended for use by persons (including children) with reduced physical,
sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning the safe use of the machine by a person responsible for their
safety. Children should be supervised to ensure that they do not have access to, and are not allowed
to play with this machine.
%&*% %*!%)$
Do not operate machine if warning and/or instruction labels are missing or damaged.
%C7,96 /=-<3:>398
V Volts
A Amperes
Hz Hertz
Min1Speed
~ Alternate Current
No No oad Speed
Double Insulated
Wear Safety Goggles
Wear Ear Protection
%"&!
!$%%"!)$%$)$($
Voltage: 12v-DC
No oad Speed: 0-500 min-1
Max. Torque: 10Nm
Torque settings: 24 positions
CO ET Capacity: 1/4" Hexagon T
!% ($&! &
Sound Pressure: PA 74.8dB(A) K=3dB
Sound Power: WA 85.8dB(A) K=3dB
Vibration: 1.394 m/s2K 1.5 m/s2
Visit us at for international toll free information 5
A
The declared vibration total value has been measured in accordance with a standard test method and
may be used for comparing one tool with another. The declared vibration total value may also be used
in a preliminary assessment of exposure.
)$
The vibration emission during actual use of the power tool can differ from the declared total value
depending on the ways in which the tool is used. The need to identify safety measures and to protect
the operator are based on an estimation of exposure in the actual conditions of use (taking account of
all parts of the operating cycles such as the times the tool is switched off, when it is running idle, in
addition to trigger time).
!&: Before using this tool, read the instruction manual carefully.
!$'%
A Battery Pack must be inserted into the tool as detailed below. It is important that the Battery Pack
is of the designated type recommended for this machine. Newly purchased Battery Packs do not
come fully charged.
%& !$$!( &&&$*" Check that the battery pack is of
the designated type for this machine. We recommend that the slide switch should be
locked in the >position when removing or inserting the Battery Pack. Refer to section below.
a. Slide the Battery Pack into the base of the tool handle. The Battery can only fit one way.
b. Gently push the Battery Pack fully into the tool handle to engage the locking tabs.
The electrical connections inside the handle will be made automatically.
c. To remove the Battery Pack, simply press the two locking tabs with your finger and
thumb and withdraw the Battery Pack from the handle.
! !&$$ This tool is fitted with a variable speed trigger switch that delivers higher
speed and torque as the trigger pressure is increased. The trigger switch is also fitted with a
brake function which stops the chuck immediately when you quickly release the trigger.
&$$%)&! To lock the trigger switch in the OFF position, slide the
forward/reverse selection control to its central position.
!$)$$($%%&! For screwdriver use the forward rotation marked on the
selection lever. Push the lever fully to the right. For reverse rotation, necessary when removing
screws, push the selection lever to the left. Only operate the selection lever when the
screwdriver is at a complete stop.
!&!"$&! This screwdriver is equipped with a 1/4" Hex Tool- ess Collet Chuck.
a. To open the collet pull the collet sleeves forward.
b. Insert the required screwdriver bit onto the open collet chuck and push it fully home.
c. Release the collet sleeve. Check that the screwdriver bit is being held by the collet chuck.
&!$#''%& & Torque is the rotary force that the screwdriver can deliver. This
screwdriver has a 24 position torque adjustment ring. The higher the number the torque adjustment
ring is set at, the greater the torque delivered by the screwdriver. For guidance: 1-4 for driving small
screws, 5-9 for driving screws into soft material, 10-15 for driving screws into soft and hard materials,
16-24 for driving screws into hard materials and for maximum torque. We recommend that the
operator tests any torque application by starting with a low setting. Progressively increase the
torque setting until the desired outcome is achieved.
Visit us at for international toll free information 6
A
&& The ED light works automatically when the trigger switch is depressed.
This feature is useful when using the screwdriver in lowlight situations (e.g. in a cupboard
or cabinet).
$( !!% %$)%!$!&% Always select the correct screwdriver bit,
for example, a Phillips driver bit for a Phillips head screw. If possible, try to determine the
torque setting required by having a practice run on a spare piece of material.
1. Ensure that the screwdriver bit is fully engaged in the screw to be driven and it's the
correct size and type.
2. Hold the screwdriver in line (axially) with the screw.
3. Apply pressure to the trigger switch so that the screwdriver bit starts to slowly rotate
in the required direction.
4. Exert forward pressure on the bit to the extent that it always remains engaged with
the screw, as the screw is either driven in or removed from the workpiece.
5. Adjust the trigger pressure to increase the speed of rotation.
& Your Power Screwdriver requires no additional lubrication or maintenance.
There are no user serviceable parts in your Power Screwdriver. Keep the tool clean, but do
not use chemical cleaners which may damage the plastic parts. Clean with a dry cloth.
Ensure that the motor ventilation slots are kept clean.
($! &"$!&&!
Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your ocal Authorities for recycling advice.
1
2
3
4
5
6
1/4" Hex Tool- ess Collet
Torque Adjustment Ring
Forward/Reverse Selection ever
Soft Grip Handle
On/Off Trigger Switch
ED ight
Inserted Battery Pack
Battery Pack ocking Tab
7
8
This manual suits for next models
2
Table of contents
Other CRL Power Screwdriver manuals
Popular Power Screwdriver manuals by other brands
Far Tools
Far Tools GV 13 Original manual translation
Parkside
Parkside PAS 4 C4 Translation of the original instructions
Toolson
Toolson PRO-AS 3,6 Li Original operating instructions
EINHELL
EINHELL RT-CD 14 Original operating instructions
Milwaukee
Milwaukee M 12 BD Original instructions
Malmbergs
Malmbergs 99 160 83 instruction manual
