Mocka Marlow Four Drawer User manual

A B C D E F
dowel
x8
bolt
x28
locking
nut x28
small
long
screw
x6
IJ
L + R slide
rail x4
G
screw
x24
wedge
x8
K
bolt
x4
screw
x40
L
nut
x4
H
screw
x8
M
Marlow Four Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x4
washer
Z
Y
wall
anchor
x2
X
safety
strap x2
WV
screw
x2
wall
screw
x2
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Hardware Supplied
N
screw
x8
* We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
felt pad
x4
Phillips & Flathead screwdrivers required.
O
screw
x2

Marlow Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 4x bolts (C) into panel [1], and tighten with a screwdriver. Attach 4x slide rails (I) to panel [3] and 4x slide rails (J) to panel [4] as
shown, and secure with 24x small screws (E). Insert 4x bolts (C) into
panels [3] and [4]. Tighten with a screwdriver.
C
1
EJ
E
I
C
C
4
3
I
CL
E
J
CR
E

Marlow Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Attach panels [5] and [6] to panel [3] with 4x screws (N). Attach
panel [7] to panel [3] and secure with 2x locking nuts (D).
Tighten with a screwdriver.
Attach panel [4] to panels [5], [6] and [7] and secure with 4x screws (N)
and 2x locking nuts (D). Tighten with a screwdriver.
N
D
D
N
N
D
N
3
5
6
7
5
6
7
4

Marlow Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
56
Slide panel [8] down along the grooves between the panels [3] and [4],
to form the back of the unit as shown.
Attach panel [2] to panels [3] and [4] with 4x dowels (A) and secure
with 4x screws (F). Tighten with a screwdriver.
F
A
4
3
8
2
4
3

Marlow Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78
Attach the leg panels [9] and [10] together with 4x bolts (K)
and 4x nuts (L). Tighten with a screwdriver. Apply 4x felt
pads (M) to panels [9] as shown.
Attach panels [9] and [10] to panel [2] and secure with 6x long screws (B).
Tighten with a screwdriver.
B
10
9
9
10
2
9
10
K
L
L
M

Marlow Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Slide panel [8] down along the grooves between panels [3] and [4]
to form the back of the unit as shown .
Attach panel [1] to the unit with 4x dowels (A) and secure with 4x
locking nuts (D) and 2x screws (O). Tighten with a screwdriver.
O
D
4
3
8
1
4
3
5
A
D
A

Marlow Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11 12
Insert 5x bolts (C) into panels [11]/[17], and tighten with a screwdriver. Attach panels [12], [13] and [16] to panels [11]/[17] and secure with 5x
locking nuts (D). Tighten with a screwdriver.
C
D
12
13
16
11 x2
17 x2
11 x2
17 x2
Drawers x4 Drawers x4

Marlow Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 14
Slide panel [14] along the grooves between the panels [12] and [13]
to form the base of the drawer.
Attach panels [12], [13], [15] and [16] as shown using 5x screws (F).
Tighten with a screwdriver.
14
13
12
11 x2
17 x2
13
12
16
15
11 x2
17 x2
F
Drawers x4 Drawers x4

Marlow Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 16
Attach slide rail (I) and slide rail (J) to the underside of the side panels
as shown. Secure with 4x small screws (E) and tighten with a screwdriver.
Insert the assembled drawers into the corresponding compartments as
shown. Ensure the drawers slide easily along the rails.
E
E
13
12
I
J
11
11 x2
17 x2
11
17
17
Drawers x4

Marlow Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17 18
Attach 8x wedges (G) into the corners of the back of the unit and secure
with 8x screws (H). Tighten with a screwdriver. Attach 2x safety straps (V)
to the top of the back side of the unit as shown using 2x washers (Z) and
2x screws (W). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the 2x safety straps (V). Fasten to
wall using 2x washers (Z), 2x wall anchors (X) and 2x wall screws (Y).
Ensure unit is balanced and steady before use. You’re done, enjoy!
1G
H
G
H
X
Y
Z
V
W
Z
V
Z
W
X
Y
Z
G
H
V
W
Z
X
Y
Z